From: Jonas Karlman <jonas@kwiboo.se>
To: Andrzej Hajda <andrzej.hajda@intel.com>,
Neil Armstrong <neil.armstrong@linaro.org>,
Robert Foss <rfoss@kernel.org>, Heiko Stuebner <heiko@sntech.de>,
Laurent Pinchart <Laurent.pinchart@ideasonboard.com>,
Jonas Karlman <jonas@kwiboo.se>,
Jernej Skrabec <jernej.skrabec@gmail.com>,
Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
Maxime Ripard <mripard@kernel.org>,
Thomas Zimmermann <tzimmermann@suse.de>,
David Airlie <airlied@gmail.com>, Simona Vetter <simona@ffwll.ch>
Cc: Liu Ying <victor.liu@nxp.com>, Sandy Huang <hjc@rock-chips.com>,
Andy Yan <andy.yan@rock-chips.com>,
Chen-Yu Tsai <wens@kernel.org>,
Christian Hewitt <christianshewitt@gmail.com>,
Diederik de Haas <diederik@cknow-tech.com>,
Nicolas Frattaroli <nicolas.frattaroli@collabora.com>,
Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>,
dri-devel@lists.freedesktop.org,
linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org,
linux-amlogic@lists.infradead.org, linux-sunxi@lists.linux.dev,
imx@lists.linux.dev, linux-kernel@vger.kernel.org
Subject: [PATCH v4 12/17] drm: bridge: dw_hdmi: Use generic CEC notifier helpers
Date: Mon, 4 May 2026 19:10:49 +0000 [thread overview]
Message-ID: <20260504191059.275928-13-jonas@kwiboo.se> (raw)
In-Reply-To: <20260504191059.275928-1-jonas@kwiboo.se>
The commit 8b1a8f8b2002 ("drm/display: add CEC helpers code") added
generic CEC helpers to be used by HDMI drivers.
Replace the open-coded CEC notifier handling with use of the generic CEC
notifier helpers. Ensure DRM_DISPLAY_HDMI_CEC_NOTIFIER_HELPER is also
selected when DRM_DW_HDMI_CEC is enabled so that the CEC helpers is
available.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
---
v4: New patch
---
drivers/gpu/drm/bridge/synopsys/Kconfig | 1 +
drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 32 ++++-------------------
2 files changed, 6 insertions(+), 27 deletions(-)
diff --git a/drivers/gpu/drm/bridge/synopsys/Kconfig b/drivers/gpu/drm/bridge/synopsys/Kconfig
index a46df7583bcf..e6723af03b43 100644
--- a/drivers/gpu/drm/bridge/synopsys/Kconfig
+++ b/drivers/gpu/drm/bridge/synopsys/Kconfig
@@ -49,6 +49,7 @@ config DRM_DW_HDMI_CEC
depends on DRM_DW_HDMI
select CEC_CORE
select CEC_NOTIFIER
+ select DRM_DISPLAY_HDMI_CEC_NOTIFIER_HELPER
help
Support the CE interface which is part of the Synopsys
Designware HDMI block.
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
index 4c712aa07a89..0aa29b92327e 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
@@ -23,12 +23,11 @@
#include <linux/dma-mapping.h>
#include <linux/spinlock.h>
-#include <media/cec-notifier.h>
-
#include <linux/media-bus-format.h>
#include <linux/videodev2.h>
#include <drm/bridge/dw_hdmi.h>
+#include <drm/display/drm_hdmi_cec_helper.h>
#include <drm/display/drm_hdmi_helper.h>
#include <drm/display/drm_scdc_helper.h>
#include <drm/drm_atomic.h>
@@ -183,8 +182,6 @@ struct dw_hdmi {
void (*enable_audio)(struct dw_hdmi *hdmi);
void (*disable_audio)(struct dw_hdmi *hdmi);
- struct cec_notifier *cec_notifier;
-
hdmi_codec_plugged_cb plugged_cb;
struct device *codec_dev;
enum drm_connector_status last_connector_result;
@@ -2453,7 +2450,7 @@ dw_hdmi_connector_status_update(struct drm_connector *connector,
if (status == connector_status_disconnected) {
drm_edid_connector_update(connector, NULL);
- cec_notifier_phys_addr_invalidate(hdmi->cec_notifier);
+ drm_connector_cec_phys_addr_invalidate(connector);
return;
}
@@ -2462,8 +2459,7 @@ dw_hdmi_connector_status_update(struct drm_connector *connector,
drm_edid_free(drm_edid);
if (status == connector_status_connected)
- cec_notifier_set_phys_addr(hdmi->cec_notifier,
- connector->display_info.source_physical_address);
+ drm_connector_cec_phys_addr_set(connector);
}
static enum drm_connector_status
@@ -2539,8 +2535,6 @@ static const struct drm_connector_helper_funcs dw_hdmi_connector_helper_funcs =
static int dw_hdmi_connector_create(struct dw_hdmi *hdmi)
{
struct drm_connector *connector = &hdmi->connector;
- struct cec_connector_info conn_info;
- struct cec_notifier *notifier;
if (hdmi->version >= 0x200a)
connector->ycbcr_420_allowed =
@@ -2571,15 +2565,8 @@ static int dw_hdmi_connector_create(struct dw_hdmi *hdmi)
drm_connector_attach_encoder(connector, hdmi->bridge.encoder);
- cec_fill_conn_info_from_drm(&conn_info, connector);
-
- notifier = cec_notifier_conn_register(hdmi->dev, NULL, &conn_info);
- if (!notifier)
- return -ENOMEM;
-
- hdmi->cec_notifier = notifier;
-
- return 0;
+ return drmm_connector_hdmi_cec_notifier_register(connector, NULL,
+ hdmi->dev);
}
/* -----------------------------------------------------------------------------
@@ -2887,14 +2874,6 @@ static int dw_hdmi_bridge_attach(struct drm_bridge *bridge,
return dw_hdmi_connector_create(hdmi);
}
-static void dw_hdmi_bridge_detach(struct drm_bridge *bridge)
-{
- struct dw_hdmi *hdmi = bridge->driver_private;
-
- cec_notifier_conn_unregister(hdmi->cec_notifier);
- hdmi->cec_notifier = NULL;
-}
-
static enum drm_mode_status
dw_hdmi_bridge_mode_valid(struct drm_bridge *bridge,
const struct drm_display_info *info,
@@ -2972,7 +2951,6 @@ static const struct drm_bridge_funcs dw_hdmi_bridge_funcs = {
.atomic_destroy_state = drm_atomic_helper_bridge_destroy_state,
.atomic_reset = drm_atomic_helper_bridge_reset,
.attach = dw_hdmi_bridge_attach,
- .detach = dw_hdmi_bridge_detach,
.atomic_check = dw_hdmi_bridge_atomic_check,
.atomic_get_output_bus_fmts = dw_hdmi_bridge_atomic_get_output_bus_fmts,
.atomic_get_input_bus_fmts = dw_hdmi_bridge_atomic_get_input_bus_fmts,
--
2.54.0
next prev parent reply other threads:[~2026-05-04 19:12 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-04 19:10 [PATCH v4 00/17] drm: bridge: dw_hdmi: Misc enable/disable, CEC and EDID cleanup Jonas Karlman
2026-05-04 19:10 ` [PATCH v4 01/17] drm: bridge: dw_hdmi: Disable scrambler feature when not supported Jonas Karlman
2026-05-04 19:10 ` [PATCH v4 02/17] drm: bridge: dw_hdmi: Only notify connected status on HPD interrupt Jonas Karlman
2026-05-04 19:10 ` [PATCH v4 03/17] drm: bridge: dw_hdmi: Call poweron/poweroff from atomic enable/disable Jonas Karlman
2026-05-04 19:10 ` [PATCH v4 04/17] drm: bridge: dw_hdmi: Use passed mode instead of stored previous_mode Jonas Karlman
2026-05-04 19:10 ` [PATCH v4 05/17] drm: bridge: dw_hdmi: Fold poweron and setup functions Jonas Karlman
2026-05-04 19:10 ` [PATCH v4 06/17] drm: bridge: dw_hdmi: Remove previous_mode and mode_set Jonas Karlman
2026-05-04 19:10 ` [PATCH v4 07/17] drm: bridge: dw_hdmi: Invalidate CEC phys addr from connector detect Jonas Karlman
2026-05-04 19:10 ` [PATCH v4 08/17] drm: bridge: dw_hdmi: Remove cec_notifier_mutex Jonas Karlman
2026-05-04 19:10 ` [PATCH v4 09/17] drm: bridge: dw_hdmi: Extract dw_hdmi_connector_status_update() Jonas Karlman
2026-05-04 19:10 ` [PATCH v4 10/17] drm: bridge: dw_hdmi: Use dw_hdmi_connector_status_update() Jonas Karlman
2026-05-04 19:10 ` [PATCH v4 11/17] drm: bridge: dw_hdmi: Use display_info is_hdmi and has_audio Jonas Karlman
2026-05-04 19:10 ` Jonas Karlman [this message]
2026-05-04 21:21 ` [PATCH v4 12/17] drm: bridge: dw_hdmi: Use generic CEC notifier helpers Neil Armstrong
2026-05-04 19:10 ` [PATCH v4 13/17] drm: bridge: dw_hdmi: Use delayed_work to debounce hotplug event Jonas Karlman
2026-05-04 19:10 ` [PATCH v4 14/17] drm: bridge: dw_hdmi: Rework HDP and RXSENSE interrupt handling Jonas Karlman
2026-05-04 19:10 ` [PATCH v4 15/17] drm: bridge: dw_hdmi: Remove the empty dw_hdmi_setup_rx_sense() Jonas Karlman
2026-05-04 19:10 ` [PATCH v4 16/17] drm: bridge: dw_hdmi: Remove the empty dw_hdmi_phy_update_hpd() Jonas Karlman
2026-05-04 19:10 ` [PATCH v4 17/17] drm: bridge: dw_hdmi: Merge top and bottom half IRQ handlers Jonas Karlman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260504191059.275928-13-jonas@kwiboo.se \
--to=jonas@kwiboo.se \
--cc=Laurent.pinchart@ideasonboard.com \
--cc=airlied@gmail.com \
--cc=andrzej.hajda@intel.com \
--cc=andy.yan@rock-chips.com \
--cc=christianshewitt@gmail.com \
--cc=diederik@cknow-tech.com \
--cc=dmitry.baryshkov@oss.qualcomm.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=heiko@sntech.de \
--cc=hjc@rock-chips.com \
--cc=imx@lists.linux.dev \
--cc=jernej.skrabec@gmail.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=linux-sunxi@lists.linux.dev \
--cc=maarten.lankhorst@linux.intel.com \
--cc=mripard@kernel.org \
--cc=neil.armstrong@linaro.org \
--cc=nicolas.frattaroli@collabora.com \
--cc=rfoss@kernel.org \
--cc=simona@ffwll.ch \
--cc=tzimmermann@suse.de \
--cc=victor.liu@nxp.com \
--cc=wens@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox