Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Nishanth Menon <nm@ti.com>
To: Justin Stitt <justinstitt@google.com>,
	Bill Wendling <morbo@google.com>,
	Nick Desaulniers <nick.desaulniers+lkml@gmail.com>,
	Nathan Chancellor <nathan@kernel.org>,
	Santosh Shilimkar <ssantosh@kernel.org>,
	Nishanth Menon <nm@ti.com>
Cc: <llvm@lists.linux.dev>, <linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>
Subject: [PATCH 06/11] soc: ti: knav_qmss: Fix __iomem annotations and __be32 type
Date: Fri, 8 May 2026 10:32:06 -0500	[thread overview]
Message-ID: <20260508153211.3688277-7-nm@ti.com> (raw)
In-Reply-To: <20260508153211.3688277-1-nm@ti.com>

Fix several address-space and type annotation issues reported by sparse:

- Fix knav_queue_pdsp_wait() declaration: correct the parameter
  annotation from 'u32 * __iomem' (pointer-in-iomem-space) to
  'u32 __iomem *' (pointer-to-iomem); use 'unsigned int' for the
  timeout parameter instead of bare 'unsigned'; fix the continuation-
  line alignment. Cast the void __iomem * argument at the call site
  that passes pdsp->command.
- Use IOMEM_ERR_PTR() in knav_queue_map_reg() instead of ERR_PTR() when
  returning an error as void __iomem * to avoid 'different address
  spaces' warnings.
- Annotate the firmware data array as 'const __be32 *' instead of
  'u32 *', as be32_to_cpu() requires __be32 input.

Signed-off-by: Nishanth Menon <nm@ti.com>
---
 drivers/soc/ti/knav_qmss_queue.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/soc/ti/knav_qmss_queue.c b/drivers/soc/ti/knav_qmss_queue.c
index 50072e9dea37..412b91344d20 100644
--- a/drivers/soc/ti/knav_qmss_queue.c
+++ b/drivers/soc/ti/knav_qmss_queue.c
@@ -477,8 +477,8 @@ static int knav_queue_debug_show(struct seq_file *s, void *v)
 
 DEFINE_SHOW_ATTRIBUTE(knav_queue_debug);
 
-static inline int knav_queue_pdsp_wait(u32 * __iomem addr, unsigned timeout,
-					u32 flags)
+static inline int knav_queue_pdsp_wait(u32 __iomem *addr, unsigned int timeout,
+				       u32 flags)
 {
 	unsigned long end;
 	u32 val = 0;
@@ -1368,7 +1368,7 @@ static void __iomem *knav_queue_map_reg(struct knav_device *kdev,
 	if (ret) {
 		dev_err(kdev->dev, "Can't translate of node(%pOFn) address for index(%d)\n",
 			node, index);
-		return ERR_PTR(ret);
+		return IOMEM_ERR_PTR(ret);
 	}
 
 	regs = devm_ioremap_resource(kdev->dev, &res);
@@ -1556,7 +1556,7 @@ static int knav_queue_load_pdsp(struct knav_device *kdev,
 	int i, ret, fwlen;
 	const struct firmware *fw;
 	bool found = false;
-	u32 *fwdata;
+	const __be32 *fwdata;
 
 	for (i = 0; i < ARRAY_SIZE(knav_acc_firmwares); i++) {
 		if (knav_acc_firmwares[i]) {
@@ -1580,7 +1580,7 @@ static int knav_queue_load_pdsp(struct knav_device *kdev,
 
 	writel_relaxed(pdsp->id + 1, pdsp->command + 0x18);
 	/* download the firmware */
-	fwdata = (u32 *)fw->data;
+	fwdata = (const __be32 *)fw->data;
 	fwlen = (fw->size + sizeof(u32) - 1) / sizeof(u32);
 	for (i = 0; i < fwlen; i++)
 		writel_relaxed(be32_to_cpu(fwdata[i]), pdsp->iram + i);
@@ -1610,7 +1610,7 @@ static int knav_queue_start_pdsp(struct knav_device *kdev,
 	writel_relaxed(val, &pdsp->regs->control);
 
 	/* wait for command register to clear */
-	ret = knav_queue_pdsp_wait(pdsp->command, timeout, 0);
+	ret = knav_queue_pdsp_wait((u32 __iomem *)pdsp->command, timeout, 0);
 	if (ret < 0) {
 		dev_err(kdev->dev,
 			"timed out on pdsp %s command register wait\n",
-- 
2.47.0



  parent reply	other threads:[~2026-05-08 15:32 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-05-08 15:32 [PATCH 00/11] soc: ti: keystone/k3 navigator queue/dma/ringacc cleanups Nishanth Menon
2026-05-08 15:32 ` [PATCH 01/11] soc: ti: knav_qmss: Remove remaining redundant ENOMEM printks Nishanth Menon
2026-05-08 15:32 ` [PATCH 02/11] soc: ti: knav_qmss: Rename global kdev to knav_qdev to fix -Wshadow Nishanth Menon
2026-05-08 15:32 ` [PATCH 03/11] soc: ti: knav_qmss: Inline lockdep condition in for_each_handle_rcu Nishanth Menon
2026-05-08 17:05   ` Andrew Davis
2026-05-08 17:15     ` Nishanth Menon
2026-05-08 15:32 ` [PATCH 04/11] soc: ti: knav_qmss: Fix kernel-doc Return: tags Nishanth Menon
2026-05-08 18:02   ` Randy Dunlap
2026-05-08 15:32 ` [PATCH 05/11] soc: ti: knav_qmss: Use %pe to print PTR_ERR() Nishanth Menon
2026-05-08 15:32 ` Nishanth Menon [this message]
2026-05-08 17:14   ` [PATCH 06/11] soc: ti: knav_qmss: Fix __iomem annotations and __be32 type Andrew Davis
2026-05-08 17:36     ` Nishanth Menon
2026-05-08 19:30       ` Andrew Davis
2026-05-08 15:32 ` [PATCH 07/11] soc: ti: knav_qmss_acc: Fix kernel-doc Return: tag Nishanth Menon
2026-05-08 18:02   ` Randy Dunlap
2026-05-08 15:32 ` [PATCH 08/11] soc: ti: knav_dma: Remove unused DMA_PRIO_MASK macro Nishanth Menon
2026-05-08 15:32 ` [PATCH 09/11] soc: ti: knav_dma: Remove dead check on unsigned args.args[0] Nishanth Menon
2026-05-08 15:32 ` [PATCH 10/11] soc: ti: knav_dma: Use IOMEM_ERR_PTR() in pktdma_get_regs() Nishanth Menon
2026-05-08 15:32 ` [PATCH 11/11] soc: ti: k3-ringacc: Use str_enabled_disabled() helper Nishanth Menon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260508153211.3688277-7-nm@ti.com \
    --to=nm@ti.com \
    --cc=justinstitt@google.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=llvm@lists.linux.dev \
    --cc=morbo@google.com \
    --cc=nathan@kernel.org \
    --cc=nick.desaulniers+lkml@gmail.com \
    --cc=ssantosh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox