[PATCH v2 0/3] arm64: dts/bindings: Add support for BeagleBadge

[Judith Mendez <jm@ti.com>]

Hi,

BeagleBoard.org BeagleBadge[1] is a compact, affordable open source
hardware [2] single board computer based on the Texas Instruments AM62L3
SoC designed for IoT and embedded applications. Add base support for
the same.

SD boot:
Link: https://gist.github.com/jmenti/d37fdb1f8113dc4d3d21479a61542106

This patch series adds:
- Device tree bindings update for am62l3-badge
- Device tree source for BeagleBadge board
- Defconfig: drivers for BeagleBadge

Changelog:
Binding:
- Update compatible to: beagle,am62l3-beaglebadge
DTS:
- Add thermal zones
- Move pinmux definitions from consumer nodes to  base controller nodes
- Define GPIOs for each of use: BOOST_5V_ENA, USB_HUB_RST, MIKROBUS_RST
- Add Andrew's sign-off tag
Defconfig:
- Add defconfig patch which enables drivers as modules for beaglebadge

Patch series depends on:
- "pinctrl: mcp23s08: Initialize mcp->dev and mcp->addr before regmap init"
- Link: https://lore.kernel.org/all/20260508214324.1040460-1-jm@ti.com

[0] https://beagleboard.org/
[1] https://www.beagleboard.org/boards/beaglebadge
[2] https://github.com/beagleboard/BeagleBadge/blob/main/design/BeagleBadge_RevA_V0.7_SCH_251107.pdf

Judith Mendez (3):
  dt-bindings: arm: ti: Add am62l3-beaglebadge
  arm64: dts: ti: Add k3-am62l3-beaglebadge
  arm64: defconfig: Enable drivers for BeagleBadge

 .../devicetree/bindings/arm/ti/k3.yaml        |   1 +
 arch/arm64/boot/dts/ti/Makefile               |   1 +
 .../boot/dts/ti/k3-am62l3-beaglebadge.dts     | 702 ++++++++++++++++++
 arch/arm64/configs/defconfig                  |   5 +
 4 files changed, 709 insertions(+)
 create mode 100644 arch/arm64/boot/dts/ti/k3-am62l3-beaglebadge.dts

-- 
2.54.0