Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Ethan Nelson-Moore <enelsonmoore@gmail.com>
To: linux-arm-kernel@lists.infradead.org, linux-omap@vger.kernel.org
Cc: Russell King <linux@armlinux.org.uk>,
	Ethan Nelson-Moore <enelsonmoore@gmail.com>,
	Aaro Koskinen <aaro.koskinen@iki.fi>,
	Andreas Kemnade <andreas@kemnade.info>,
	Kevin Hilman <khilman@baylibre.com>,
	Roger Quadros <rogerq@kernel.org>,
	Tony Lindgren <tony@atomide.com>,
	Andrew Morton <akpm@linux-foundation.org>,
	Jiri Bohac <jbohac@suse.cz>
Subject: [PATCH] ARM: move the only use of machine_desc.reboot_mode into mach-omap2
Date: Sun, 10 May 2026 19:18:00 -0700	[thread overview]
Message-ID: <20260511021806.180107-1-enelsonmoore@gmail.com> (raw)

struct machine_desc defines a reboot_mode field which is only set by
mach-omap2. Simplify the code and make it more generic by moving the
code to set reboot_mode from arch/arm/kernel/setup.c into mach-omap2.

Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
---
 arch/arm/include/asm/mach/arch.h    | 1 -
 arch/arm/kernel/setup.c             | 3 ---
 arch/arm/mach-omap2/board-generic.c | 6 ------
 arch/arm/mach-omap2/io.c            | 7 +++++++
 4 files changed, 7 insertions(+), 10 deletions(-)

diff --git a/arch/arm/include/asm/mach/arch.h b/arch/arm/include/asm/mach/arch.h
index 2b18a258204d..d4688cd1f080 100644
--- a/arch/arm/include/asm/mach/arch.h
+++ b/arch/arm/include/asm/mach/arch.h
@@ -40,7 +40,6 @@ struct machine_desc {
 	unsigned char		reserve_lp0 :1;	/* never has lp0	*/
 	unsigned char		reserve_lp1 :1;	/* never has lp1	*/
 	unsigned char		reserve_lp2 :1;	/* never has lp2	*/
-	enum reboot_mode	reboot_mode;	/* default restart mode	*/
 	unsigned		l2c_aux_val;	/* L2 cache aux value	*/
 	unsigned		l2c_aux_mask;	/* L2 cache aux mask	*/
 	void			(*l2c_write_sec)(unsigned long, unsigned);
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index 0bfd66c7ada0..6430646a46bf 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -1123,9 +1123,6 @@ void __init setup_arch(char **cmdline_p)
 	machine_name = mdesc->name;
 	dump_stack_set_arch_desc("%s", mdesc->name);
 
-	if (mdesc->reboot_mode != REBOOT_HARD)
-		reboot_mode = mdesc->reboot_mode;
-
 	setup_initial_init_mm(_text, _etext, _edata, _end);
 
 	/* populate cmd_line too for later use, preserving boot_command_line */
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index 68e0baad2bbf..fde6ccb3df6e 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -246,12 +246,6 @@ DT_MACHINE_START(AM33XX_DT, "Generic AM33XX (Flattened Device Tree)")
 	.init_time	= omap_init_time_of,
 	.dt_compat	= am33xx_boards_compat,
 	.restart	= am33xx_restart,
-	/*
-	 * Historically am33xx supported only REBOOT_WARM even though default
-	 * reboot_mode was REBOOT_COLD. Reflect legacy de-facto behaviour in
-	 * SYSFS.
-	 */
-	.reboot_mode	= REBOOT_WARM,
 MACHINE_END
 #endif
 
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 14ec3f78000b..26a12d083dce 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -15,6 +15,7 @@
  */
 #include <linux/module.h>
 #include <linux/kernel.h>
+#include <linux/reboot.h>
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/clk.h>
@@ -546,6 +547,12 @@ void __init ti816x_init_early(void)
 #ifdef CONFIG_SOC_AM33XX
 void __init am33xx_init_early(void)
 {
+	/*
+	 * Historically am33xx supported only REBOOT_WARM even though default
+	 * reboot_mode was REBOOT_COLD. Reflect legacy de-facto behaviour in
+	 * SYSFS.
+	 */
+	reboot_mode = REBOOT_WARM;
 	omap2_set_globals_tap(AM335X_CLASS,
 			      AM33XX_L4_WK_IO_ADDRESS(AM33XX_TAP_BASE));
 	omap2_control_base_init();
-- 
2.43.0



                 reply	other threads:[~2026-05-11  2:18 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260511021806.180107-1-enelsonmoore@gmail.com \
    --to=enelsonmoore@gmail.com \
    --cc=aaro.koskinen@iki.fi \
    --cc=akpm@linux-foundation.org \
    --cc=andreas@kemnade.info \
    --cc=jbohac@suse.cz \
    --cc=khilman@baylibre.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=rogerq@kernel.org \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox