[PATCH 3/3] usb: dwc3: xilinx: fix error handling in zynqmp init error paths

[Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>]

Fix error handling and resource cleanup i.e remove invalid
phy_exit() after failed phy_init(), route failures through
proper cleanup paths and return 0 explicitly on success.

Fixes: 84770f028fab ("usb: dwc3: Add driver for Xilinx platforms")
Cc: stable@vger.kernel.org
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
---
 drivers/usb/dwc3/dwc3-xilinx.c | 27 +++++++++++++++------------
 1 file changed, 15 insertions(+), 12 deletions(-)

diff --git a/drivers/usb/dwc3/dwc3-xilinx.c b/drivers/usb/dwc3/dwc3-xilinx.c
index 94458b3da1a0..b832505e1b04 100644
--- a/drivers/usb/dwc3/dwc3-xilinx.c
+++ b/drivers/usb/dwc3/dwc3-xilinx.c
@@ -176,15 +176,13 @@ static int dwc3_xlnx_init_zynqmp(struct dwc3_xlnx *priv_data)
 	}
 
 	ret = phy_init(priv_data->usb3_phy);
-	if (ret < 0) {
-		phy_exit(priv_data->usb3_phy);
+	if (ret < 0)
 		goto err;
-	}
 
 	ret = reset_control_deassert(apbrst);
 	if (ret < 0) {
 		dev_err(dev, "Failed to release APB reset\n");
-		goto err;
+		goto err_phy_exit;
 	}
 
 	if (priv_data->usb3_phy) {
@@ -200,26 +198,24 @@ static int dwc3_xlnx_init_zynqmp(struct dwc3_xlnx *priv_data)
 	ret = reset_control_deassert(crst);
 	if (ret < 0) {
 		dev_err(dev, "Failed to release core reset\n");
-		goto err;
+		goto err_phy_exit;
 	}
 
 	ret = reset_control_deassert(hibrst);
 	if (ret < 0) {
 		dev_err(dev, "Failed to release hibernation reset\n");
-		goto err;
+		goto err_phy_exit;
 	}
 
 	ret = phy_power_on(priv_data->usb3_phy);
-	if (ret < 0) {
-		phy_exit(priv_data->usb3_phy);
-		goto err;
-	}
+	if (ret < 0)
+		goto err_phy_exit;
 
 	/* ulpi reset via gpio-modepin or gpio-framework driver */
 	reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
 	if (IS_ERR(reset_gpio)) {
-		return dev_err_probe(dev, PTR_ERR(reset_gpio),
-				     "Failed to request reset GPIO\n");
+		ret = PTR_ERR(reset_gpio);
+		goto err_phy_power_off;
 	}
 
 	if (reset_gpio) {
@@ -229,6 +225,13 @@ static int dwc3_xlnx_init_zynqmp(struct dwc3_xlnx *priv_data)
 	}
 
 	dwc3_xlnx_set_coherency(priv_data, XLNX_USB_TRAFFIC_ROUTE_CONFIG);
+
+	return 0;
+
+err_phy_power_off:
+	phy_power_off(priv_data->usb3_phy);
+err_phy_exit:
+	phy_exit(priv_data->usb3_phy);
 err:
 	return ret;
 }
-- 
2.44.4