From: Angelo Dureghello <adureghello@baylibre.com>
To: "Greg Ungerer" <gerg@linux-m68k.org>,
"Geert Uytterhoeven" <geert@linux-m68k.org>,
"Steven King" <sfking@fdwdc.com>, "Arnd Bergmann" <arnd@arndb.de>,
"Maxime Coquelin" <mcoquelin.stm32@gmail.com>,
"Alexandre Torgue" <alexandre.torgue@foss.st.com>,
"Jonathan Cameron" <jic23@kernel.org>,
"David Lechner" <dlechner@baylibre.com>,
"Nuno Sá" <nuno.sa@analog.com>,
"Andy Shevchenko" <andy@kernel.org>
Cc: Greg Ungerer <gerg@uclinux.org>,
linux-m68k@lists.linux-m68k.org, linux-kernel@vger.kernel.org,
linux-stm32@st-md-mailman.stormreply.com,
linux-arm-kernel@lists.infradead.org, linux-iio@vger.kernel.org,
Angelo Dureghello <adureghello@baylibre.com>
Subject: [PATCH v2 00/11] add mcf54415 DAC driver
Date: Wed, 13 May 2026 11:14:24 +0200 [thread overview]
Message-ID: <20260513-wip-stmark2-dac-v2-0-fcdae50cf51a@baylibre.com> (raw)
This patchset adds a minimalistic DAC driver for the NXP mcf54415/6/7/8
ibuiltin DACs.
Currently the driver enables the raw write only. Feature as dma, sync, or
format are not supoprted for this version.
Additional options suppoerted by the DAC module will be added to the driver
later on, as needed.
The same patchset prepares the m68k/coldfire architecture to support
the driver.
Below soem basic tests done on stmark2 mcf54415-based board, voltage check
on DAC0 and DAC1:
~ # cd /sys/bus/iio/devices/iio:device0/
/sys/bus/iio/devices/iio:device0 # ls
name out_voltage_scale uevent
out_voltage_raw subsystem
/sys/bus/iio/devices/iio:device0 # cat name
mcf54415
/sys/bus/iio/devices/iio:device0 # echo 4095 > out_voltage_raw
/sys/bus/iio/devices/iio:device0 # echo 2048 > out_voltage_raw
/sys/bus/iio/devices/iio:device0 # echo 4096 > out_voltage_raw
sh: write error: Invalid argument
/sys/bus/iio/devices/iio:device0 # cat out_voltage_raw
2048
/sys/bus/iio/devices/iio:device0 #
Same behavior for /sys/bus/iio/devices/iio:device1.
Generated a sine wave by shell script, sine shape is good.
Note: this patchset depends on mew mcf_read/mcf_write implementation:
Link: https://lore.kernel.org/linux-m68k/209d0653-6386-4b64-9e15-e358f84453ab@app.fastmail.com/T/#t
---
Changes in v2:
- keeping changelog in each single patch, where any
- Link to v1: https://patch.msgid.link/20260504-wip-stmark2-dac-v1-0-874c36a4910d@baylibre.com
---
Angelo Dureghello (11):
m68k: mcf5441x: fix clocks numbering
m68k: mcf5441x: add clock for DAC channel 1
m68k: mcf5441x: setup DAC clock name as per driver name
m68k: defconfig: update stmark2 defconfig
m68k: add DAC modules base addresses
m68k: mcf5441x: add CCM registers
m68k: mcf5441x: add CCR MISCCR2 bitfields
m68k: stmark2: add mcf5441x DAC platform devices
m68k: stmark2: use ioport.h macros for resources
m68k: stmark2: enable DACs outputs
iio: dac: add mcf54415 DAC
arch/m68k/coldfire/m5441x.c | 21 ++--
arch/m68k/coldfire/stmark2.c | 51 ++++++---
arch/m68k/configs/stmark2_defconfig | 2 +
arch/m68k/include/asm/m5441xsim.h | 42 ++++++++
drivers/iio/dac/Kconfig | 10 ++
drivers/iio/dac/Makefile | 1 +
drivers/iio/dac/mcf54415_dac.c | 203 ++++++++++++++++++++++++++++++++++++
7 files changed, 306 insertions(+), 24 deletions(-)
---
base-commit: 25c66a1b49f3c5463ee8266a3fd5256cbc794610
change-id: 20260430-wip-stmark2-dac-7060f49dd94f
Best regards,
--
Angelo Dureghello <adureghello@baylibre.com>
next reply other threads:[~2026-05-13 9:14 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-13 9:14 Angelo Dureghello [this message]
2026-05-13 9:14 ` [PATCH v2 01/11] m68k: mcf5441x: fix clocks numbering Angelo Dureghello
2026-05-13 9:14 ` [PATCH v2 02/11] m68k: mcf5441x: add clock for DAC channel 1 Angelo Dureghello
2026-05-13 9:14 ` [PATCH v2 03/11] m68k: mcf5441x: setup DAC clock name as per driver name Angelo Dureghello
2026-05-14 1:27 ` Greg Ungerer
2026-05-13 9:14 ` [PATCH v2 04/11] m68k: defconfig: update stmark2 defconfig Angelo Dureghello
2026-05-13 9:14 ` [PATCH v2 05/11] m68k: add DAC modules base addresses Angelo Dureghello
2026-05-13 9:14 ` [PATCH v2 06/11] m68k: mcf5441x: add CCM registers Angelo Dureghello
2026-05-13 9:14 ` [PATCH v2 07/11] m68k: mcf5441x: add CCR MISCCR2 bitfields Angelo Dureghello
2026-05-13 9:14 ` [PATCH v2 08/11] m68k: stmark2: add mcf5441x DAC platform devices Angelo Dureghello
2026-05-13 13:53 ` Jonathan Cameron
2026-05-13 20:16 ` Andy Shevchenko
2026-05-13 9:14 ` [PATCH v2 09/11] m68k: stmark2: use ioport.h macros for resources Angelo Dureghello
2026-05-13 13:55 ` Jonathan Cameron
2026-05-13 20:18 ` Andy Shevchenko
2026-05-13 9:14 ` [PATCH v2 10/11] m68k: stmark2: enable DACs outputs Angelo Dureghello
2026-05-13 13:56 ` Jonathan Cameron
2026-05-13 9:14 ` [PATCH v2 11/11] iio: dac: add mcf54415 DAC Angelo Dureghello
2026-05-13 14:07 ` Jonathan Cameron
2026-05-13 20:28 ` Andy Shevchenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260513-wip-stmark2-dac-v2-0-fcdae50cf51a@baylibre.com \
--to=adureghello@baylibre.com \
--cc=alexandre.torgue@foss.st.com \
--cc=andy@kernel.org \
--cc=arnd@arndb.de \
--cc=dlechner@baylibre.com \
--cc=geert@linux-m68k.org \
--cc=gerg@linux-m68k.org \
--cc=gerg@uclinux.org \
--cc=jic23@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-m68k@lists.linux-m68k.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=nuno.sa@analog.com \
--cc=sfking@fdwdc.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox