Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: phucduc.bui@gmail.com
To: Olivier Moysan <olivier.moysan@foss.st.com>,
	Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>,
	Mark Brown <broonie@kernel.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>,
	Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>,
	Maxime Coquelin <mcoquelin.stm32@gmail.com>,
	Alexandre Torgue <alexandre.torgue@foss.st.com>,
	linux-sound@vger.kernel.org,
	linux-stm32@st-md-mailman.stormreply.com,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org,
	bui duc phuc <phucduc.bui@gmail.com>
Subject: [PATCH 2/4] ASoC: stm: stm32_i2s: Use guard() for spin locks
Date: Wed, 13 May 2026 17:43:27 +0700	[thread overview]
Message-ID: <20260513104329.81592-3-phucduc.bui@gmail.com> (raw)
In-Reply-To: <20260513104329.81592-1-phucduc.bui@gmail.com>

From: bui duc phuc <phucduc.bui@gmail.com>

Clean up the code using guard() for spin locks.
Merely code refactoring, and no behavior change.

Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
---
 sound/soc/stm/stm32_i2s.c | 67 ++++++++++++++++++---------------------
 1 file changed, 30 insertions(+), 37 deletions(-)

diff --git a/sound/soc/stm/stm32_i2s.c b/sound/soc/stm/stm32_i2s.c
index 6ca21780f21d..4fddb7ecd7fd 100644
--- a/sound/soc/stm/stm32_i2s.c
+++ b/sound/soc/stm/stm32_i2s.c
@@ -615,10 +615,10 @@ static irqreturn_t stm32_i2s_isr(int irq, void *devid)
 	if (flags & I2S_SR_TIFRE)
 		dev_dbg(&pdev->dev, "Frame error\n");
 
-	spin_lock(&i2s->irq_lock);
-	if (err && i2s->substream)
-		snd_pcm_stop_xrun(i2s->substream);
-	spin_unlock(&i2s->irq_lock);
+	scoped_guard(spinlock, &i2s->irq_lock) {
+		if (err && i2s->substream)
+			snd_pcm_stop_xrun(i2s->substream);
+	}
 
 	return IRQ_HANDLED;
 }
@@ -905,12 +905,10 @@ static int stm32_i2s_startup(struct snd_pcm_substream *substream,
 			     struct snd_soc_dai *cpu_dai)
 {
 	struct stm32_i2s_data *i2s = snd_soc_dai_get_drvdata(cpu_dai);
-	unsigned long flags;
 	int ret;
 
-	spin_lock_irqsave(&i2s->irq_lock, flags);
-	i2s->substream = substream;
-	spin_unlock_irqrestore(&i2s->irq_lock, flags);
+	scoped_guard(spinlock_irqsave, &i2s->irq_lock)
+		i2s->substream = substream;
 
 	if ((i2s->fmt & SND_SOC_DAIFMT_FORMAT_MASK) != SND_SOC_DAIFMT_DSP_A)
 		snd_pcm_hw_constraint_single(substream->runtime,
@@ -982,19 +980,19 @@ static int stm32_i2s_trigger(struct snd_pcm_substream *substream, int cmd,
 		regmap_write_bits(i2s->regmap, STM32_I2S_IFCR_REG,
 				  I2S_IFCR_MASK, I2S_IFCR_MASK);
 
-		spin_lock(&i2s->lock_fd);
-		i2s->refcount++;
-		if (playback_flg) {
-			ier = I2S_IER_UDRIE;
-		} else {
-			ier = I2S_IER_OVRIE;
-
-			if (STM32_I2S_IS_MASTER(i2s) && i2s->refcount == 1)
-				/* dummy write to gate bus clocks */
-				regmap_write(i2s->regmap,
-					     STM32_I2S_TXDR_REG, 0);
+		scoped_guard(spinlock, &i2s->lock_fd) {
+			i2s->refcount++;
+			if (playback_flg) {
+				ier = I2S_IER_UDRIE;
+			} else {
+				ier = I2S_IER_OVRIE;
+
+				if (STM32_I2S_IS_MASTER(i2s) && i2s->refcount == 1)
+					/* dummy write to gate bus clocks */
+					regmap_write(i2s->regmap,
+						     STM32_I2S_TXDR_REG, 0);
+			}
 		}
-		spin_unlock(&i2s->lock_fd);
 
 		if (STM32_I2S_IS_SLAVE(i2s))
 			ier |= I2S_IER_TIFREIE;
@@ -1016,21 +1014,18 @@ static int stm32_i2s_trigger(struct snd_pcm_substream *substream, int cmd,
 					   I2S_IER_OVRIE,
 					   (unsigned int)~I2S_IER_OVRIE);
 
-		spin_lock(&i2s->lock_fd);
-		i2s->refcount--;
-		if (i2s->refcount) {
-			spin_unlock(&i2s->lock_fd);
-			break;
-		}
+		scoped_guard(spinlock, &i2s->lock_fd) {
+			i2s->refcount--;
+			if (i2s->refcount)
+				break;
 
-		ret = regmap_update_bits(i2s->regmap, STM32_I2S_CR1_REG,
-					 I2S_CR1_SPE, 0);
-		if (ret < 0) {
-			dev_err(cpu_dai->dev, "Error %d disabling I2S\n", ret);
-			spin_unlock(&i2s->lock_fd);
-			return ret;
+			ret = regmap_update_bits(i2s->regmap, STM32_I2S_CR1_REG,
+						 I2S_CR1_SPE, 0);
+			if (ret < 0) {
+				dev_err(cpu_dai->dev, "Error %d disabling I2S\n", ret);
+				return ret;
+			}
 		}
-		spin_unlock(&i2s->lock_fd);
 
 		cfg1_mask = I2S_CFG1_RXDMAEN | I2S_CFG1_TXDMAEN;
 		regmap_update_bits(i2s->regmap, STM32_I2S_CFG1_REG,
@@ -1047,7 +1042,6 @@ static void stm32_i2s_shutdown(struct snd_pcm_substream *substream,
 			       struct snd_soc_dai *cpu_dai)
 {
 	struct stm32_i2s_data *i2s = snd_soc_dai_get_drvdata(cpu_dai);
-	unsigned long flags;
 
 	clk_disable_unprepare(i2s->i2sclk);
 
@@ -1059,9 +1053,8 @@ static void stm32_i2s_shutdown(struct snd_pcm_substream *substream,
 	if (!i2s->i2smclk && i2s->put_i2s_clk_rate)
 		i2s->put_i2s_clk_rate(i2s);
 
-	spin_lock_irqsave(&i2s->irq_lock, flags);
-	i2s->substream = NULL;
-	spin_unlock_irqrestore(&i2s->irq_lock, flags);
+	scoped_guard(spinlock_irqsave, &i2s->irq_lock)
+		i2s->substream = NULL;
 }
 
 static int stm32_i2s_dai_probe(struct snd_soc_dai *cpu_dai)
-- 
2.43.0



  parent reply	other threads:[~2026-05-13 10:44 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-05-13 10:43 [PATCH 0/4] ASoC: stm: Use guard() for mutex & spin locks phucduc.bui
2026-05-13 10:43 ` [PATCH 1/4] ASoC: stm: stm32_adfsdm: Use guard() for mutex locks phucduc.bui
2026-05-13 10:43 ` phucduc.bui [this message]
2026-05-13 10:43 ` [PATCH 3/4] ASoC: stm: stm32_sai_sub: Use guard() for mutex & spin locks phucduc.bui
2026-05-13 10:43 ` [PATCH 4/4] ASoC: stm: stm32_spdifrx: Use guard() for " phucduc.bui

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260513104329.81592-3-phucduc.bui@gmail.com \
    --to=phucduc.bui@gmail.com \
    --cc=alexandre.torgue@foss.st.com \
    --cc=arnaud.pouliquen@foss.st.com \
    --cc=broonie@kernel.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sound@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=olivier.moysan@foss.st.com \
    --cc=perex@perex.cz \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox