From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id ECD2CCD4F21 for ; Wed, 13 May 2026 23:35:19 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender:List-Subscribe:List-Help :List-Post:List-Archive:List-Unsubscribe:List-Id:Content-Type: Content-Transfer-Encoding:MIME-Version:References:In-Reply-To:Message-ID:Date :Subject:CC:To:From:Reply-To:Content-ID:Content-Description:Resent-Date: Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:List-Owner; bh=m84oQ8wRVNkYDrEWA81DDGttZnncQVIVrF/wfBsiwJA=; b=3B1GDxrysw5zcyNKNNikAPk6aO +M7bXO/VE2tU3S0pyHS1GIfeW8VqOv9x68rYWw9kz0Z7JFsQpm9UEV+rgQZK7xERNbwMo8cY4RY8+ 6S82g9j/nrTJ4We7FppLUxesP8o1t55jnjMJWXHSUinqx6+lTwDl9um5JXLXzNx2kMn1lIWMOrzw7 QM8xEaVWzDphdG2dA7yO++PifDuGNKmjaJCZDWQRpup7Y2mLmrPDLqheVBLEmnuWzy/neKj/OF42y SBPDdKu5cjW2xKKbdlrDaxF403w5zHxPClMau7nNUPekw9FVy88DU64zmIEJGoINqj2Bw7Zc5UJjV l8qy4wKw==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.99.1 #2 (Red Hat Linux)) id 1wNJ6c-000000043zo-1DbL; Wed, 13 May 2026 23:35:10 +0000 Received: from desiato.infradead.org ([2001:8b0:10b:1:d65d:64ff:fe57:4e05]) by bombadil.infradead.org with esmtps (Exim 4.99.1 #2 (Red Hat Linux)) id 1wNJ6V-000000043vb-2cOb for linux-arm-kernel@bombadil.infradead.org; Wed, 13 May 2026 23:35:04 +0000 DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=infradead.org; s=desiato.20200630; h=Content-Type:Content-Transfer-Encoding :MIME-Version:References:In-Reply-To:Message-ID:Date:Subject:CC:To:From: Sender:Reply-To:Content-ID:Content-Description; bh=m84oQ8wRVNkYDrEWA81DDGttZnncQVIVrF/wfBsiwJA=; b=kVAHxyeiex0Qx0+nSE/kJlZdDv Q7gH5cLDJNdbiB3GqlyaPiHIj6D/QZnWwdy6EmwbC3KcEo9Ye527SQxCgTIG8PzeeOPV+sO+65DQ8 iASwzK4NS4OaH9jUPeYEtHcHvXth0D+xJeSE0cryFxnOTU0DTo/3u2tMMUSx3KAL0rzV25PUNYaln TuOEFFR4ysZ+3WLNjPl7A1ktVOMJzFkX2X/aWdneFOEkc0Fn/U4PXRa53MuIqBHNlrVHMGQaNbjKu 5uOmXMNC/2gIcBqP8dVdqiW3dxTBtsnAQDU6rFOyM478JOefQXXIzAa0labCCw51kOC/yW9aSSPaa SGmIXQUg==; Received: from mail-eastusazon11011044.outbound.protection.outlook.com ([52.101.52.44] helo=BL2PR02CU003.outbound.protection.outlook.com) by desiato.infradead.org with esmtps (Exim 4.99.1 #2 (Red Hat Linux)) id 1wNJ6P-00000001kza-1DGL for linux-arm-kernel@lists.infradead.org; Wed, 13 May 2026 23:35:01 +0000 ARC-Seal: i=1; a=rsa-sha256; s=arcselector10001; d=microsoft.com; cv=none; b=wPSx5bF+hNrzfJvPQ7LtVrJ6s2Ps5A8dIRJSJv6YvN01qZwWXoMkKulxqioSqjne8YNC05AjDHZFEJO45CTFcGWblornXRyzNCQ98U3f8tSRdyqqQ7wHry8eD3R/wJnJwhnvcEMkviNWKv2KIcey7whC8zW4eeYabF0DsA/1C5W3wkY+E/mqjK3jQWwea4OUfOjYcBEXBVRIkeQwBoVubatRFZz84b17I8XakYis/su8SLrt1lNKk6hhG9glCZ/lZu2/9y3DoS4mvY/tmp5vRJcCRRTLhTLXc6sQnOepOWar1SZYl8qRUS0HHrvjEwJ19Dvm3feJ8L6njES9BQMnVA== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=microsoft.com; s=arcselector10001; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-AntiSpam-MessageData-ChunkCount:X-MS-Exchange-AntiSpam-MessageData-0:X-MS-Exchange-AntiSpam-MessageData-1; bh=m84oQ8wRVNkYDrEWA81DDGttZnncQVIVrF/wfBsiwJA=; b=YPqrk7PJOWJ7u2VVojsyFvnVNWuxexPrPAYorqyLK18QQSq9pxhnOdcnwPKywi6T+a3Y3tYse0syuqpT+w12pIhYC7QCVv5qXMudhqh9fu+omstr4wkhqr9s99+/GxizyeDwNbLcXM4kQypOWFSxsr7L3lhmEevMujiLdOU63uU+N6nBYfdEgHofheMukne9eC0kqSu9JFFk08Fgv3bQUYgQIfi+76f8d1r7dNEhctNWCSmXKS9Ju1LNG4tu0xo2/+q47Fpw1J5WWurh7Gs7r2a0223jzsb1V0S+2Qxc3MtFUnopyg2dCd/xObc4//j2q6pCajtLOB0OemAcys5lcQ== ARC-Authentication-Results: i=1; mx.microsoft.com 1; spf=pass (sender ip is 198.47.23.195) smtp.rcpttodomain=vger.kernel.org smtp.mailfrom=ti.com; dmarc=pass (p=quarantine sp=none pct=100) action=none header.from=ti.com; dkim=none (message not signed); arc=none (0) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=ti.com; s=selector1; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-SenderADCheck; bh=m84oQ8wRVNkYDrEWA81DDGttZnncQVIVrF/wfBsiwJA=; b=ijUp0U+5DmGz5pq0lKVsbtyFdxI2E/HZJAFMXi/g02g52Qj20lzSuBU/DyTtyonr4n5BVka25pJFpsRCaLEOWhAIXgqQ/GLhPNgNGz81EpDg0SBQhE8lXMIhp8uTsnD12WgKYwyvJjOzuQbr3ZAvoaAH6D4L68jMMqm+Vb70FCE= Received: from BN0PR04CA0066.namprd04.prod.outlook.com (2603:10b6:408:ea::11) by SA1PR10MB997557.namprd10.prod.outlook.com (2603:10b6:806:4b1::11) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.9891.23; Wed, 13 May 2026 23:34:49 +0000 Received: from BN3PEPF0000B373.namprd21.prod.outlook.com (2603:10b6:408:ea:cafe::3) by BN0PR04CA0066.outlook.office365.com (2603:10b6:408:ea::11) with Microsoft SMTP Server (version=TLS1_3, cipher=TLS_AES_256_GCM_SHA384) id 15.20.9913.12 via Frontend Transport; Wed, 13 May 2026 23:34:49 +0000 X-MS-Exchange-Authentication-Results: spf=pass (sender IP is 198.47.23.195) smtp.mailfrom=ti.com; dkim=none (message not signed) header.d=none;dmarc=pass action=none header.from=ti.com; Received-SPF: Pass (protection.outlook.com: domain of ti.com designates 198.47.23.195 as permitted sender) receiver=protection.outlook.com; client-ip=198.47.23.195; helo=lewvzet201.ext.ti.com; pr=C Received: from lewvzet201.ext.ti.com (198.47.23.195) by BN3PEPF0000B373.mail.protection.outlook.com (10.167.243.170) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.21.48.3 via Frontend Transport; Wed, 13 May 2026 23:34:49 +0000 Received: from DLEE205.ent.ti.com (157.170.170.85) by lewvzet201.ext.ti.com (10.4.14.104) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.2562.37; Wed, 13 May 2026 18:34:48 -0500 Received: from DLEE209.ent.ti.com (157.170.170.98) by DLEE205.ent.ti.com (157.170.170.85) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.2562.37; Wed, 13 May 2026 18:34:47 -0500 Received: from lelvem-mr06.itg.ti.com (10.180.75.8) by DLEE209.ent.ti.com (157.170.170.98) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.2562.37 via Frontend Transport; Wed, 13 May 2026 18:34:47 -0500 Received: from judy-hp.dhcp.ti.com (judy-hp.dhcp.ti.com [128.247.81.105]) by lelvem-mr06.itg.ti.com (8.18.1/8.18.1) with ESMTP id 64DNYlSQ499089; Wed, 13 May 2026 18:34:47 -0500 From: Judith Mendez To: Judith Mendez , Nishanth Menon , Vignesh Raghavendra CC: Tero Kristo , Rob Herring , "Krzysztof Kozlowski" , Conor Dooley , , , , Andrew Davis , Bryan Brattlof Subject: [PATCH v3 2/3] arm64: dts: ti: Add k3-am62l3-beaglebadge Date: Wed, 13 May 2026 18:34:46 -0500 Message-ID: <20260513233447.2713737-3-jm@ti.com> X-Mailer: git-send-email 2.54.0 In-Reply-To: <20260513233447.2713737-1-jm@ti.com> References: <20260513233447.2713737-1-jm@ti.com> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Content-Type: text/plain X-C2ProcessedOrg: 333ef613-75bf-4e12-a4b1-8e3623f5dcea X-EOPAttributedMessage: 0 X-MS-PublicTrafficType: Email X-MS-TrafficTypeDiagnostic: BN3PEPF0000B373:EE_|SA1PR10MB997557:EE_ X-MS-Office365-Filtering-Correlation-Id: 77206984-4dae-4627-b09b-08deb14839b4 X-MS-Exchange-SenderADCheck: 1 X-MS-Exchange-AntiSpam-Relay: 0 X-Microsoft-Antispam: BCL:0;ARA:13230040|376014|82310400026|1800799024|36860700016|56012099003|22082099003|18002099003|3023799003; X-Microsoft-Antispam-Message-Info: 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 X-Forefront-Antispam-Report: CIP:198.47.23.195;CTRY:US;LANG:en;SCL:1;SRV:;IPV:NLI;SFV:NSPM;H:lewvzet201.ext.ti.com;PTR:InfoDomainNonexistent;CAT:NONE;SFS:(13230040)(376014)(82310400026)(1800799024)(36860700016)(56012099003)(22082099003)(18002099003)(3023799003);DIR:OUT;SFP:1101; X-MS-Exchange-AntiSpam-MessageData-ChunkCount: 1 X-MS-Exchange-AntiSpam-MessageData-0: WSBCuPqzhAtK6fYfZMGt+/82ZIovOzCQw5ZteMzpivoFfswLFodxU9UJmci6rzpyogXyAJ29LXSAagQK4Z1zkNFWA7/sUwJoq3dR9ESFiSbxuqyckJC2cukpKUof7xu/oiQwFlFUnuuRcsI4+1VgWIyGn7IXsYnO7qQmImnKAXHMhSZDJToj4kYR3zRB7yN6xIBYmskcW0pYHoQ7NXoB12GoxBUp/PHzH6d0FsdIaBoJ8yPmAOaMwTCpc26ufdTBw2jlq6z7OpkyU/AqjgfCGBYoN3BTkQKsl1PDXVowI9unYbmsw3e3rfc20sMLzYSuVBGo5VY8/xYk5PD0nfuCZ4NL2L+K7Pq2HhBwLUMDhWFjV76+uCnvKXU46Orqf07cgrm9i0eCZy50NiVm9MqeRHoWqAbu5Qt2JdAVVCOXCI/wC3xF+7BMH5yZC1TA3eF+ X-OriginatorOrg: ti.com X-MS-Exchange-CrossTenant-OriginalArrivalTime: 13 May 2026 23:34:49.5910 (UTC) X-MS-Exchange-CrossTenant-Network-Message-Id: 77206984-4dae-4627-b09b-08deb14839b4 X-MS-Exchange-CrossTenant-Id: e5b49634-450b-4709-8abb-1e2b19b982b7 X-MS-Exchange-CrossTenant-OriginalAttributedTenantConnectingIp: TenantId=e5b49634-450b-4709-8abb-1e2b19b982b7;Ip=[198.47.23.195];Helo=[lewvzet201.ext.ti.com] X-MS-Exchange-CrossTenant-AuthSource: BN3PEPF0000B373.namprd21.prod.outlook.com X-MS-Exchange-CrossTenant-AuthAs: Anonymous X-MS-Exchange-CrossTenant-FromEntityHeader: HybridOnPrem X-MS-Exchange-Transport-CrossTenantHeadersStamped: SA1PR10MB997557 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.9.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20260514_003458_154607_34003731 X-CRM114-Status: GOOD ( 15.08 ) X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org BeagleBoard.org BeagleBadge is a compact, affordable open source hardware single board computer based on the Texas Instruments AM62L3 SoC designed for IoT and embedded applications with low power consumption. Expansion is provided over open standards based headers including QWIIC and GPIO interfaces. https://beagleboard.org https://github.com/beagleboard/BeagleBadge Co-developed-by: Andrew Davis Signed-off-by: Andrew Davis Signed-off-by: Judith Mendez --- Changelog: - PWM period: 255ns -> 10000000ns - vdd_3v3 vin-supply: vsys_out -> vcc_3v3_main - MCP23S18 reset muxmode: 4 -> 7 - Typo: FUEL_GUAGE_BATLOW -> FUEL_GAUGE_BATLOW - sdhci2: Remove #address-cells & #size-cells --- arch/arm64/boot/dts/ti/Makefile | 1 + .../boot/dts/ti/k3-am62l3-beaglebadge.dts | 700 ++++++++++++++++++ 2 files changed, 701 insertions(+) create mode 100644 arch/arm64/boot/dts/ti/k3-am62l3-beaglebadge.dts diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile index 5269c9619b65c..4e377ca011cd8 100644 --- a/arch/arm64/boot/dts/ti/Makefile +++ b/arch/arm64/boot/dts/ti/Makefile @@ -41,6 +41,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-am62d2-evm.dtb # Boards with AM62Lx SoCs dtb-$(CONFIG_ARCH_K3) += k3-am62l3-evm.dtb +dtb-$(CONFIG_ARCH_K3) += k3-am62l3-beaglebadge.dtb # Boards with AM62Px SoC dtb-$(CONFIG_ARCH_K3) += k3-am62p5-sk.dtb diff --git a/arch/arm64/boot/dts/ti/k3-am62l3-beaglebadge.dts b/arch/arm64/boot/dts/ti/k3-am62l3-beaglebadge.dts new file mode 100644 index 0000000000000..b7541e162a90d --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am62l3-beaglebadge.dts @@ -0,0 +1,700 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * https://www.beagleboard.org/boards/beaglebadge + * + * Copyright (C) 2026 Texas Instruments Incorporated - https://www.ti.com/ + */ + +/dts-v1/; + +#include +#include +#include +#include +#include +#include "k3-am62l3.dtsi" +#include "k3-pinctrl.h" + +/ { + compatible = "beagle,am62l3-beaglebadge", "ti,am62l3"; + model = "BeagleBoard.org BeagleBadge"; + + chosen { + stdout-path = &uart0; + }; + + aliases { + gpio0 = &gpio0; + gpio2 = &wkup_gpio0; + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c4 = &wkup_i2c0; + mmc1 = &sdhci1; + mmc2 = &sdhci2; + serial3 = &uart1; + usb0 = &usb0; + usb1 = &usb1; + }; + + memory@80000000 { + /* 256MB */ + reg = <0x00000000 0x80000000 0x00000000 0x10000000>; + device_type = "memory"; + bootph-all; + }; + + thermal-zones { + wkup0-thermal { + polling-delay-passive = <250>; /* milliSeconds */ + polling-delay = <500>; /* milliSeconds */ + thermal-sensors = <&vtm0 0>; + + trips { + crit0 { + temperature = <125000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; + + gpio_keys: gpio-keys { + compatible = "gpio-keys"; + autorepeat; + + button-select { + label = "SELECT"; + linux,code = ; + gpios = <&gpio0 26 GPIO_ACTIVE_LOW>; + }; + + button-back { + label = "BACK"; + linux,code = ; + gpios = <&gpio0 104 GPIO_ACTIVE_LOW>; + }; + + button-up { + label = "UP"; + linux,code = ; + gpios = <&gpio0 32 GPIO_ACTIVE_LOW>; + }; + + button-down { + label = "DOWN"; + linux,code = ; + gpios = <&gpio0 42 GPIO_ACTIVE_LOW>; + }; + + button-left { + label = "LEFT"; + linux,code = ; + gpios = <&gpio0 31 GPIO_ACTIVE_LOW>; + }; + + button-right { + label = "RIGHT"; + linux,code = ; + gpios = <&gpio0 95 GPIO_ACTIVE_LOW>; + }; + }; + + multicolor-led { + compatible = "pwm-leds-multicolor"; + + multi-led { + color = ; + max-brightness = <255>; + + led-red { + pwms = <&ecap2 0 10000000 0>; + color = ; + }; + + led-green { + pwms = <&ecap1 0 10000000 0>; + color = ; + }; + + led-blue { + pwms = <&epwm1 1 10000000 0>; + color = ; + }; + }; + }; + + seven-segment-left { + compatible = "gpio-7-segment"; + segment-gpios = <&mcp23s18 0 GPIO_ACTIVE_LOW>, + <&mcp23s18 1 GPIO_ACTIVE_LOW>, + <&mcp23s18 2 GPIO_ACTIVE_LOW>, + <&mcp23s18 3 GPIO_ACTIVE_LOW>, + <&mcp23s18 4 GPIO_ACTIVE_LOW>, + <&mcp23s18 5 GPIO_ACTIVE_LOW>, + <&mcp23s18 6 GPIO_ACTIVE_LOW>, + <&mcp23s18 7 GPIO_ACTIVE_LOW>; + }; + + seven-segment-right { + compatible = "gpio-7-segment"; + segment-gpios = <&mcp23s18 8 GPIO_ACTIVE_LOW>, + <&mcp23s18 9 GPIO_ACTIVE_LOW>, + <&mcp23s18 10 GPIO_ACTIVE_LOW>, + <&mcp23s18 11 GPIO_ACTIVE_LOW>, + <&mcp23s18 12 GPIO_ACTIVE_LOW>, + <&mcp23s18 13 GPIO_ACTIVE_LOW>, + <&mcp23s18 14 GPIO_ACTIVE_LOW>, + <&mcp23s18 15 GPIO_ACTIVE_LOW>; + }; + + pwm-beeper { + compatible = "pwm-beeper"; + pwms = <&epwm0 1 1000000 0>; + amp-supply = <&sensor_3v3>; + }; + + vsys_out: regulator-0 { + /* output of BQ24070 */ + compatible = "regulator-fixed"; + regulator-name = "VSYS_OUT"; + regulator-min-microvolt = <4400000>; + regulator-max-microvolt = <4400000>; + regulator-always-on; + regulator-boot-on; + bootph-all; + }; + + vcc_3v3_main: regulator-1 { + /* output of TPS62A06 */ + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3_MAIN"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vsys_out>; + regulator-always-on; + regulator-boot-on; + bootph-all; + }; + + vdd_3v3: regulator-2 { + /* output of TPS22965 */ + compatible = "regulator-fixed"; + regulator-name = "VDD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_3v3_main>; + regulator-always-on; + regulator-boot-on; + bootph-all; + }; + + vdd_3v3_sd: regulator-3 { + /* TPS22918DBVR */ + compatible = "regulator-fixed"; + regulator-name = "VDD_3V3_SD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vdd_3v3>; + regulator-boot-on; + enable-active-high; + gpio = <&gpio0 16 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vdd_3v3_sd_ena_pins_default>; + bootph-all; + }; + + sensor_3v3: regulator-4 { + /* TPS22918DBVR */ + compatible = "regulator-fixed"; + regulator-name = "Sensor_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vdd_3v3>; + regulator-boot-on; + regulator-always-on; + enable-active-high; + gpio = <&wkup_gpio0 1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&sensor_3v3_ena_pins_default>; + bootph-all; + }; + + wlan_en: regulator-5 { + compatible = "regulator-fixed"; + regulator-name = "wlan_en"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + enable-active-high; + gpios = <&gpio0 51 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&wlan_en_pins_default>; + }; +}; + +&pmx0 { + uart0_pins_default: uart0-default-pins { + pinctrl-single,pins = < + AM62LX_IOPAD(0x01b8, PIN_OUTPUT, 0) /* (C13) UART0_TXD */ + AM62LX_IOPAD(0x01b4, PIN_INPUT, 0) /* (D13) UART0_RXD */ + >; + bootph-all; + }; + + uart0_pins_wakeup: uart0-wakeup-pins { + pinctrl-single,pins = < + AM62LX_IOPAD(0x01b8, PIN_OUTPUT, 0) /* (C13) UART0_TXD */ + AM62LX_IOPAD(0x01b4, PIN_INPUT | PIN_WKUP_EN, 0) /* (D13) UART0_RXD */ + >; + bootph-all; + }; + + uart1_pins_default: uart1-default-pins { + pinctrl-single,pins = < + AM62LX_IOPAD(0x019c, PIN_OUTPUT, 2) /* (A12) MCASP0_ACLKR.UART1_TXD */ + AM62LX_IOPAD(0x0198, PIN_INPUT, 2) /* (C11) MCASP0_AFSR.UART1_RXD */ + AM62LX_IOPAD(0x0180, PIN_INPUT, 2) /* (A8) MCASP0_AXR3.UART1_CTSn */ + AM62LX_IOPAD(0x0184, PIN_OUTPUT, 2) /* (B10) MCASP0_AXR2.UART1_RTSn */ + >; + bootph-all; + }; + + usr_button_pins_default: usr-button-default-pins { + pinctrl-single,pins = < + AM62LX_IOPAD(0x00a4, PIN_INPUT, 7) /* (H18) GPMC0_AD11.GPIO0_26 */ + AM62LX_IOPAD(0x01e4, PIN_INPUT, 7) /* (D16) EXT_REFCLK1.GPIO0_104 */ + AM62LX_IOPAD(0x00c0, PIN_INPUT, 7) /* (N19) GPMC0_ADVn_ALE.GPIO0_32 */ + AM62LX_IOPAD(0x00e8, PIN_INPUT, 7) /* (L19) GPMC0_CSn1.GPIO0_42 */ + AM62LX_IOPAD(0x00b8, PIN_INPUT, 7) /* (L21) GPMC0_CLK.GPIO0_31 */ + AM62LX_IOPAD(0x01c0, PIN_INPUT, 7) /* (B13) UART0_RTSn.GPIO0_95 */ + >; + }; + + i2c0_pins_default: i2c0-default-pins { + pinctrl-single,pins = < + AM62LX_IOPAD(0x01cc, PIN_INPUT_PULLUP, 0) /* (B7) I2C0_SCL */ + AM62LX_IOPAD(0x01d0, PIN_INPUT_PULLUP, 0) /* (A7) I2C0_SDA */ + >; + bootph-all; + }; + + i2c1_pins_default: i2c1-default-pins { + pinctrl-single,pins = < + AM62LX_IOPAD(0x01d4, PIN_INPUT_PULLUP, 0) /* (D7) I2C1_SCL */ + AM62LX_IOPAD(0x01d8, PIN_INPUT_PULLUP, 0) /* (A6) I2C1_SDA */ + >; + bootph-all; + }; + + i2c2_qwiic_pins_default: i2c2-qwiic-default-pins { + pinctrl-single,pins = < + AM62LX_IOPAD(0x01dc, PIN_INPUT_PULLUP, 0) /* (B8) I2C2_SCL */ + AM62LX_IOPAD(0x01e0, PIN_INPUT_PULLUP, 0) /* (D8) I2C2_SDA */ + >; + bootph-all; + }; + + vdd_3v3_sd_ena_pins_default: vdd-3v3-sd-ena-default-pins { + pinctrl-single,pins = < + AM62LX_IOPAD(0x07c, PIN_OUTPUT, 7) /* (L23) GPMC0_AD1.GPIO0_16 */ + >; + bootph-all; + }; + + sensor_3v3_ena_pins_default: sensor-3v3-ena-default-pins { + pinctrl-single,pins = < + AM62LX_IOPAD(0x004, PIN_OUTPUT, 7) /* (AA23) WKUP_UART0_TXD.WKUP_GPIO0_1 */ + >; + }; + + mmc1_pins_default: mmc1-default-pins { + pinctrl-single,pins = < + AM62LX_IOPAD(0x0230, PIN_INPUT, 0) /* (Y3) MMC1_CMD */ + AM62LX_IOPAD(0x0228, PIN_OUTPUT, 0) /* (Y2) MMC1_CLK */ + AM62LX_IOPAD(0x0224, PIN_INPUT, 0) /* (AA1) MMC1_DAT0 */ + AM62LX_IOPAD(0x0220, PIN_INPUT, 0) /* (Y4) MMC1_DAT1 */ + AM62LX_IOPAD(0x021c, PIN_INPUT, 0) /* (AA2) MMC1_DAT2 */ + AM62LX_IOPAD(0x0218, PIN_INPUT, 0) /* (AB2) MMC1_DAT3 */ + AM62LX_IOPAD(0x0234, PIN_INPUT, 7) /* (B6) MMC1_SDCD.GPIO0_122 */ + >; + bootph-all; + }; + + mmc2_pins_default: mmc2-default-pins { + pinctrl-single,pins = < + AM62LX_IOPAD(0x010c, PIN_INPUT, 0) /* (U23) MMC2_CMD */ + AM62LX_IOPAD(0x0104, PIN_OUTPUT, 0) /* (R23) MMC2_CLK */ + AM62LX_IOPAD(0x0108, PIN_INPUT, 0) /* () MMC2_CLKLB */ + AM62LX_IOPAD(0x0100, PIN_INPUT, 0) /* (U22) MMC2_DAT0 */ + AM62LX_IOPAD(0x00fc, PIN_INPUT, 0) /* (T22) MMC2_DAT1 */ + AM62LX_IOPAD(0x00f8, PIN_INPUT, 0) /* (T23) MMC2_DAT2 */ + AM62LX_IOPAD(0x00f4, PIN_INPUT, 0) /* (R22) MMC2_DAT3 */ + >; + }; + + wlan_en_pins_default: wlan-en-default-pins { + pinctrl-single,pins = < + AM62LX_IOPAD(0x0110, PIN_OUTPUT, 7) /* (T20) MMC2_SDCD.GPIO0_51 */ + >; + }; + + usb1_pins_default: usb1-default-pins { + pinctrl-single,pins = < + AM62LX_IOPAD(0x0248, PIN_INPUT | PIN_DS_PULLUD_ENABLE | + PIN_DS_PULL_UP, 0) /* (A5) USB1_DRVVBUS */ + >; + bootph-all; + }; + + pwm_beeper_pins_default: pwm-beeper-default-pins { + pinctrl-single,pins = < + AM62LX_IOPAD(0x00b0, PIN_OUTPUT, 4) /* (F22) GPMC0_AD14.EHRPWM0_B */ + >; + }; + + pmic_irq_pins_default: pmic-irq-default-pins { + pinctrl-single,pins = < + AM62LX_IOPAD(0x01e8, PIN_INPUT, 0) /* (C8) EXTINTn */ + >; + bootph-all; + }; + + wkup_i2c0_pins_default: wkup-i2c0-default-pins { + pinctrl-single,pins = < + AM62LX_IOPAD(0x0010, PIN_INPUT_PULLUP, 0) /* (AB22) WKUP_I2C0_SCL */ + AM62LX_IOPAD(0x0014, PIN_INPUT_PULLUP, 0) /* (AA22) WKUP_I2C0_SDA */ + >; + bootph-all; + }; + + rgb_led_ecap2_pins_default: rgb-led-ecap2-default-pins { + pinctrl-single,pins = < + AM62LX_IOPAD(0x0190, PIN_OUTPUT, 2) /* (A11) MCASP0_ACLKX.ECAP2_IN_APWM_OUT */ + >; + }; + + rgb_led_ecap1_pins_default: rgb-led-ecap1-default-pins { + pinctrl-single,pins = < + AM62LX_IOPAD(0x0188, PIN_OUTPUT, 2) /* (A9) MCASP0_AXR1.ECAP1_IN_APWM_OUT */ + >; + }; + + rgb_led_epwm1_pins_default: rgb-led-epwm1-default-pins { + pinctrl-single,pins = < + AM62LX_IOPAD(0x018c, PIN_OUTPUT, 5) /* (B9) MCASP0_AXR0.EHRPWM1_B */ + >; + }; + + spi1_pins_default: spi1-default-pins { + pinctrl-single,pins = < + AM62LX_IOPAD(0x008c, PIN_OUTPUT, 4) /* (H22) GPMC0_AD5.SPI1_CLK */ + AM62LX_IOPAD(0x0088, PIN_OUTPUT, 4) /* (K23) GPMC0_AD4.SPI1_CS0 */ + AM62LX_IOPAD(0x0080, PIN_INPUT, 4) /* (K22) GPMC0_AD2.SPI1_D0 */ + AM62LX_IOPAD(0x0084, PIN_OUTPUT, 4) /* (J23) GPMC0_AD3.SPI1_D1 */ + >; + bootph-all; + }; + + spi3_pins_default: spi3-default-pins { + pinctrl-single,pins = < + AM62LX_IOPAD(0x00d0, PIN_OUTPUT, 5) /* (P22) GPMC0_BE1n.SPI3_CLK */ + AM62LX_IOPAD(0x00cc, PIN_OUTPUT, 5) /* (P23) GPMC0_BE0n_CLE.SPI3_CS0 */ + AM62LX_IOPAD(0x00d4, PIN_INPUT, 5) /* (N23) GPMC0_WAIT0.SPI3_D0 */ + AM62LX_IOPAD(0x00d8, PIN_OUTPUT, 5) /* (N22) GPMC0_WAIT1.SPI3_D1 */ + >; + }; + + mcp23s18_reset_pins_default: mcp23s18-reset-default-pins { + pinctrl-single,pins = < + AM62LX_IOPAD(0x00a0, PIN_OUTPUT, 7) /* (H21) GPMC0_AD10.GPIO0_25 */ + >; + }; + + epwm2_pins_default: epwm2-default-pins { + pinctrl-single,pins = < + AM62LX_IOPAD(0x00c4, PIN_OUTPUT, 4) /* (N20) GPMC0_OEn_REn.EHRPWM2_A */ + >; + }; + + lora_control_pins_default: lora-control-default-pins { + pinctrl-single,pins = < + AM62LX_IOPAD(0x00c8, PIN_OUTPUT, 7) /* (M19) GPMC0_WEn.GPIO0_34 */ + AM62LX_IOPAD(0x00e4, PIN_OUTPUT, 7) /* (L20) GPMC0_CSn0.GPIO0_41 */ + AM62LX_IOPAD(0x01a4, PIN_INPUT, 7) /* (D11) SPI0_CS1.GPIO0_88 */ + AM62LX_IOPAD(0x01bc, PIN_INPUT, 7) /* (B14) UART0_CTSn.GPIO0_94 */ + >; + }; + + gpio0_pins_default: gpio0-default-pins { + pinctrl-single,pins = < + AM62LX_IOPAD(0x0078, PIN_OUTPUT, 7) /* (L22) GPMC0_AD0.GPIO0_15 */ + AM62LX_IOPAD(0x00e0, PIN_INPUT, 7) /* (M21) GPMC0_DIR.GPIO0_40 */ + AM62LX_IOPAD(0x00ec, PIN_OUTPUT, 7) /* (M23) GPMC0_CSn2.GPIO0_43 */ + AM62LX_IOPAD(0x00f0, PIN_INPUT, 7) /* (M22) GPMC0_CSn3.GPIO0_44 */ + AM62LX_IOPAD(0x0194, PIN_OUTPUT, 7) /* (B11) MCASP0_AFSX.GPIO0_84 */ + >; + }; +}; + +&uart0 { + wakeup-source; + pinctrl-0 = <&uart0_pins_default>; + pinctrl-1 = <&uart0_pins_wakeup>; + pinctrl-names = "default", "wakeup"; + bootph-all; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins_default>; + bootph-all; + status = "okay"; +}; + +&i2c0 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_default>; + bootph-all; + status = "okay"; + + /* T&H Sensor */ + th-sensor@44 { + compatible = "sensirion,sht4x"; + reg = <0x44>; + }; + + /* EEPROM */ + eeprom@50 { + /* FT24C32A-ELRT */ + compatible = "atmel,24c32"; + reg = <0x50>; + }; + + /* Fuel Gauge */ + fuel-gauge@55 { + compatible = "ti,bq27541"; + reg = <0x55>; + }; + + /* IMU Sensor */ + accelerometer@6a { + compatible = "st,lsm6ds3tr-c"; + reg = <0x6a>; + vdd-supply = <&vcc_3v3_main>; + vddio-supply = <&vcc_3v3_main>; + }; +}; + +&i2c1 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_default>; + bootph-all; + status = "okay"; +}; + +&i2c2 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_qwiic_pins_default>; + bootph-all; + status = "okay"; +}; + +&wkup_i2c0 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&wkup_i2c0_pins_default>; + status = "okay"; + + tps65214: pmic@30 { + compatible = "ti,tps65214"; + reg = <0x30>; + interrupt-parent = <&gic500>; + interrupts = ; + buck1-supply = <&vcc_3v3_main>; + buck2-supply = <&vcc_3v3_main>; + buck3-supply = <&vcc_3v3_main>; + ldo1-supply = <&vcc_3v3_main>; + ldo2-supply = <&vcc_3v3_main>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_irq_pins_default>; + ti,power-button; + + regulators { + buck1_reg: buck1 { + regulator-name = "VDD_CORE"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-always-on; + regulator-boot-on; + }; + + buck2_reg: buck2 { + regulator-name = "VDD_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + buck3_reg: buck3 { + regulator-name = "VDD_LPDDR4"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo1_reg: ldo1 { + regulator-name = "VDDA_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo2_reg: ldo2 { + regulator-name = "PMIC_VDD_RTC"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-always-on; + regulator-boot-on; + }; + }; + }; +}; + +&gpio0 { + gpio-line-names ="","","","","","","","","","", /* 0-9 */ + "","","","","","BOOST_5V_ENA","VDD_3V3_SD_ENA","","","", /* 10-19 */ + "","","","","","MCP23S18_RESET","BTN_SELECT","","","", /* 20-29 */ + "","BTN_LEFT","BTN_UP","","LORA_RESET","","","","","", /* 30-39 */ + "FUEL_GAUGE_BATLOW","LORA_RFSW","BTN_DOWN","USB_HUB_RST","MIKROBUS_INT","","","","","", /* 40-49 */ + "","WLAN_EN","","","","","","","","", /* 50-59 */ + "","","","","","","","","","", /* 60-69 */ + "","","","","","","","","","", /* 70-79 */ + "","","","","MIKROBUS_RST","","","","LORA_BUSY","", /* 80-89 */ + "","","","","LORA_DIO","BTN_RIGHT","","","","", /* 90-99 */ + "","","","","BTN_BACK","","","","","", /* 100-109 */ + "","","","","","","","","","", /* 110-119 */ + "","","SD_CD","","",""; /* 120-125 */ + pinctrl-names = "default"; + pinctrl-0 = <&gpio0_pins_default>, <&usr_button_pins_default>, <&lora_control_pins_default>; + bootph-all; + status = "okay"; +}; + +&wkup_gpio0 { + gpio-line-names ="","SENSOR_3V3_ENA","","","","","",""; /* 0-7 */ + bootph-all; + status = "okay"; +}; + +&sdhci1 { + /* SD/MMC */ + vmmc-supply = <&vdd_3v3_sd>; + disable-wp; + cd-gpios = <&gpio0 122 GPIO_ACTIVE_LOW>; + cd-debounce-delay-ms = <100>; + ti,fails-without-test-cd; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins_default>; + bootph-all; + status = "okay"; +}; + +&sdhci2 { + vmmc-supply = <&wlan_en>; + bus-width = <4>; + non-removable; + cap-power-off-card; + keep-power-in-suspend; + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins_default>; + ti,driver-strength-ohm = <50>; + ti,fails-without-test-cd; + status = "okay"; +}; + +&epwm0 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm_beeper_pins_default>; + status = "okay"; +}; + +&epwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&rgb_led_epwm1_pins_default>; + status = "okay"; +}; + +&epwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&epwm2_pins_default>; + status = "okay"; +}; + +&ecap1 { + pinctrl-names = "default"; + pinctrl-0 = <&rgb_led_ecap1_pins_default>; + status = "okay"; +}; + +&ecap2 { + pinctrl-names = "default"; + pinctrl-0 = <&rgb_led_ecap2_pins_default>; + status = "okay"; +}; + +&usbss0 { + ti,vbus-divider; + status = "okay"; +}; + +&usb0 { + usb-role-switch; + bootph-all; + status = "okay"; +}; + +&usbss1 { + ti,vbus-divider; + bootph-all; + status = "okay"; +}; + +&usb1 { + dr_mode = "host"; + pinctrl-names = "default"; + pinctrl-0 = <&usb1_pins_default>; + bootph-all; + status = "okay"; +}; + +&spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&spi1_pins_default>; + status = "okay"; + + mcp23s18: gpio@0 { + compatible = "microchip,mcp23s18"; + reg = <0>; + spi-max-frequency = <10000000>; + gpio-controller; + #gpio-cells = <2>; + reset-gpios = <&gpio0 25 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&mcp23s18_reset_pins_default>; + microchip,spi-present-mask = /bits/ 8 <0x01>; + }; +}; + +&spi3 { + pinctrl-names = "default"; + pinctrl-0 = <&spi3_pins_default>; + status = "okay"; +}; -- 2.54.0