[PATCH v3 3/3] hwmon: raspberrypi: Fix delayed-work teardown race

[Shubham Chakraborty <chakrabortyshubham66@gmail.com>]

The delayed polling work rearms itself from the work function, so use
explicit delayed-work setup and cleanup instead of
devm_delayed_work_autocancel().

Initialize the delayed work with INIT_DELAYED_WORK() and register a
devres cleanup action that calls disable_delayed_work_sync() during
teardown.

This addresses the concern raised during review about the polling work
being able to requeue itself while the driver is being removed.

Signed-off-by: Shubham Chakraborty <chakrabortyshubham66@gmail.com>
---
 drivers/hwmon/raspberrypi-hwmon.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/hwmon/raspberrypi-hwmon.c b/drivers/hwmon/raspberrypi-hwmon.c
index 8ce6dacc19b0..0bbc735f74a4 100644
--- a/drivers/hwmon/raspberrypi-hwmon.c
+++ b/drivers/hwmon/raspberrypi-hwmon.c
@@ -8,7 +8,6 @@
  * Copyright (C) 2026 Shubham Chakraborty <chakrabortyshubham66@gmail.com>
  */
 #include <linux/device.h>
-#include <linux/devm-helpers.h>
 #include <linux/err.h>
 #include <linux/hwmon.h>
 #include <linux/module.h>
@@ -96,6 +95,13 @@ static void get_values_poll(struct work_struct *work)
 	schedule_delayed_work(&data->get_values_poll_work, 2 * HZ);
 }
 
+static void rpi_hwmon_cancel_poll_work(void *res)
+{
+	struct rpi_hwmon_data *data = res;
+
+	disable_delayed_work_sync(&data->get_values_poll_work);
+}
+
 static int rpi_read(struct device *dev, enum hwmon_sensor_types type,
 		    u32 attr, int channel, long *val)
 {
@@ -237,8 +243,8 @@ static int rpi_hwmon_probe(struct platform_device *pdev)
 	if (IS_ERR(data->hwmon_dev))
 		return PTR_ERR(data->hwmon_dev);
 
-	ret = devm_delayed_work_autocancel(dev, &data->get_values_poll_work,
-					   get_values_poll);
+	INIT_DELAYED_WORK(&data->get_values_poll_work, get_values_poll);
+	ret = devm_add_action_or_reset(dev, rpi_hwmon_cancel_poll_work, data);
 	if (ret)
 		return ret;
 	platform_set_drvdata(pdev, data);
-- 
2.54.0