[PATCH V3 8/8] arm64: dts: imx95: Move power supply properties to Root Port node

["Sherry Sun (OSS)" <sherry.sun@oss.nxp.com>]

From: Sherry Sun <sherry.sun@nxp.com>

Move the vpcie-supply and vpcie3v3aux-supply properties from the PCIe
controller nodes to the Root Port child nodes to support the new PCI
pwrctrl framework.

Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx95-15x15-evk.dts | 4 ++--
 arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts | 8 ++++----
 2 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx95-15x15-evk.dts b/arch/arm64/boot/dts/freescale/imx95-15x15-evk.dts
index 7d820a0f80b2..0d1cdfd54cce 100644
--- a/arch/arm64/boot/dts/freescale/imx95-15x15-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx95-15x15-evk.dts
@@ -555,8 +555,6 @@ &pcie0 {
 	pinctrl-names = "default";
 	/* This property is deprecated, use reset-gpios from the Root Port node. */
 	reset-gpio = <&gpio5 13 GPIO_ACTIVE_LOW>;
-	vpcie-supply = <&reg_m2_pwr>;
-	vpcie3v3aux-supply = <&reg_m2_pwr>;
 	supports-clkreq;
 	status = "disabled";
 };
@@ -570,6 +568,8 @@ &pcie0_ep {
 
 &pcie0_port0 {
 	reset-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_m2_pwr>;
+	vpcie3v3aux-supply = <&reg_m2_pwr>;
 };
 
 &sai1 {
diff --git a/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts b/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
index 2e463bc7c601..c08731dfb1ee 100644
--- a/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
@@ -542,8 +542,6 @@ &pcie0 {
 	pinctrl-names = "default";
 	/* This property is deprecated, use reset-gpios from the Root Port node. */
 	reset-gpio = <&i2c7_pcal6524 5 GPIO_ACTIVE_LOW>;
-	vpcie-supply = <&reg_pcie0>;
-	vpcie3v3aux-supply = <&reg_pcie0>;
 	supports-clkreq;
 	status = "okay";
 };
@@ -557,6 +555,8 @@ &pcie0_ep {
 
 &pcie0_port0 {
 	reset-gpios = <&i2c7_pcal6524 5 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_pcie0>;
+	vpcie3v3aux-supply = <&reg_pcie0>;
 };
 
 &pcie1 {
@@ -564,8 +564,6 @@ &pcie1 {
 	pinctrl-names = "default";
 	/* This property is deprecated, use reset-gpios from the Root Port node. */
 	reset-gpio = <&i2c7_pcal6524 16 GPIO_ACTIVE_LOW>;
-	vpcie-supply = <&reg_slot_pwr>;
-	vpcie3v3aux-supply = <&reg_slot_pwr>;
 	status = "okay";
 };
 
@@ -578,6 +576,8 @@ &pcie1_ep {
 
 &pcie1_port0 {
 	reset-gpios = <&i2c7_pcal6524 16 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_slot_pwr>;
+	vpcie3v3aux-supply = <&reg_slot_pwr>;
 };
 
 &sai1 {
-- 
2.37.1