From: Heiko Stuebner <heiko@sntech.de>
To: vkoul@kernel.org
Cc: neil.armstrong@linaro.org, heiko@sntech.de, jonas@kwiboo.se,
linux-phy@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org,
kernel test robot <lkp@intel.com>
Subject: [PATCH] phy: rockchip: inno-usb2: Add missing clkout_ctl_phy kerneldoc
Date: Wed, 20 May 2026 12:28:59 +0200 [thread overview]
Message-ID: <20260520102859.1357411-1-heiko@sntech.de> (raw)
Add the missing documentation for the newly added clkout_ctl_phy field.
Fixes: 2775541de058 ("phy: rockchip: inno-usb2: Add clkout_ctl_phy support")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202605150315.MyBNQOPB-lkp@intel.com/
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
index 133cfd6624e8..7d8a533f24ae 100644
--- a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
+++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
@@ -170,7 +170,8 @@ struct rockchip_usb2phy_port_cfg {
* @reg: the address offset of grf for usb-phy config.
* @num_ports: specify how many ports that the phy has.
* @phy_tuning: phy default parameters tuning.
- * @clkout_ctl: keep on/turn off output clk of phy.
+ * @clkout_ctl: register to enable output clk of phy, when set in GRF
+ * @clkout_ctl_phy: register to enable output clk of phy, when set inside phy
* @port_cfgs: usb-phy port configurations.
* @chg_det: charger detection registers.
*/
--
2.47.3
next reply other threads:[~2026-05-20 10:29 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-20 10:28 Heiko Stuebner [this message]
2026-06-11 15:35 ` [PATCH] phy: rockchip: inno-usb2: Add missing clkout_ctl_phy kerneldoc Vinod Koul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260520102859.1357411-1-heiko@sntech.de \
--to=heiko@sntech.de \
--cc=jonas@kwiboo.se \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=lkp@intel.com \
--cc=neil.armstrong@linaro.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox