Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Vitor Soares <ivitro@gmail.com>
To: Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
	Neil Armstrong <neil.armstrong@linaro.org>,
	Jessica Zhang <jesszhan0024@gmail.com>,
	David Airlie <airlied@gmail.com>, Simona Vetter <simona@ffwll.ch>,
	Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
	Maxime Ripard <mripard@kernel.org>,
	Thomas Zimmermann <tzimmermann@suse.de>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>, Nishanth Menon <nm@ti.com>,
	Vignesh Raghavendra <vigneshr@ti.com>,
	Tero Kristo <kristo@kernel.org>,
	Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>,
	Thierry Reding <thierry.reding@gmail.com>
Cc: Vitor Soares <vitor.soares@toradex.com>,
	dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 00/11] arm64: dts: ti: k3-am62-verdin: Add display and peripheral overlays
Date: Fri, 22 May 2026 14:20:13 +0100	[thread overview]
Message-ID: <20260522132014.226721-13-ivitro@gmail.com> (raw)

From: Vitor Soares <vitor.soares@toradex.com>

This series adds device tree overlays, expanding the hardware support for
the Toradex Verdin AM62 SoM. The overlays target displays, cameras, audio,
and peripherals available through Toradex carrier boards and the accessory
ecosystem.

Display additions cover three interface types:
- native OLDI (LVDS) with Toradex Capacitive Touch Display 10.1" LVDS
- DSI-to-LVDS adapter based on the SN65DSI84 with Toradex Capacitive Touch
  Display 10.1" LVDS
- DSI driving Toradex Capacitive Touch Display 7" and 10.1" DSI.

The Riverdi vendor prefix and panel bindings required by the DSI overlay
patches are also added.

Non-display additions include OV5640 CSI camera support in 24 MHz and
27 MHz oscillator variants, NAU8822 Bridge Tied Load mode on the
Development Board, MCU_MCAN1 on the Verdin AM62 Mezzanine board,
and MCU_UART0 reservation for the Cortex-M4F debug UART.

TI maintainers: patches adding the Riverdi vendor prefix and panel-lvds
bindings are required by the DTS patches.
Are you fine picking up the full series once those patches are acked by
the DT/display maintainers?

Thanks,
Vitor Soares
---
Changes in v2:
- Add Acked-by tags
- Drop introduction of the LG LP156WF1 15.6" FHD dual-channel LVDS panel
- Drop migration of "logictechno,lt170410-2whc" to panel-lvds.yaml
- Link v1: https://lore.kernel.org/all/20260521150038.103538-17-ivitro@gmail.com/
---

Vitor Soares (11):
  arm64: dts: ti: k3-am62-verdin: Add Toradex DSI to LVDS adapter with
    10.1" display
  arm64: dts: ti: k3-am62-verdin: Add Toradex Capacitive Touch Display
    10.1" LVDS
  dt-bindings: vendor-prefixes: Add Riverdi
  dt-bindings: display: panel-lvds: Add Riverdi RVT70HSLNWCA0 and
    RVT101HVLNWC00
  arm64: dts: ti: k3-am62-verdin: Add Toradex Capacitive Touch Display
    10.1" DSI
  arm64: dts: ti: k3-am62-verdin: Add Toradex Capacitive Touch Display
    7" DSI
  arm64: dts: ti: k3-am62-verdin: Add NAU8822 Bridge Tied Load
  arm64: dts: ti: k3-am62-verdin: Reserve UART_4 for Cortex-M4F
  arm64: dts: ti: k3-am62-verdin: Add Toradex OV5640 CSI Cameras
  arm64: dts: ti: k3-am62-verdin: Add Toradex Verdin Mezzanine CAN
  arm64: dts: ti: k3-am62-verdin: Add Mezzanine with Toradex Display
    10.1" LVDS

 .../bindings/display/panel/panel-lvds.yaml    |   4 +
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 arch/arm64/boot/dts/ti/Makefile               |  49 +++++++
 .../ti/k3-am625-verdin-dev-mezzanine-can.dtso |  28 ++++
 ...mezzanine-panel-cap-touch-10inch-lvds.dtso |  97 +++++++++++++
 .../ti/k3-am625-verdin-dev-nau8822-btl.dtso   |  14 ++
 ...in-dsi-to-lvds-panel-cap-touch-10inch.dtso | 123 ++++++++++++++++
 .../dts/ti/k3-am625-verdin-ov5640-24mhz.dtso  |  17 +++
 .../boot/dts/ti/k3-am625-verdin-ov5640.dtsi   |  71 ++++++++++
 .../boot/dts/ti/k3-am625-verdin-ov5640.dtso   |  18 +++
 ...625-verdin-panel-cap-touch-10inch-dsi.dtso | 132 ++++++++++++++++++
 ...25-verdin-panel-cap-touch-10inch-lvds.dtso | 119 ++++++++++++++++
 ...m625-verdin-panel-cap-touch-7inch-dsi.dtso | 132 ++++++++++++++++++
 .../dts/ti/k3-am625-verdin-uart4-mcu.dtso     |  13 ++
 14 files changed, 819 insertions(+)
 create mode 100644 arch/arm64/boot/dts/ti/k3-am625-verdin-dev-mezzanine-can.dtso
 create mode 100644 arch/arm64/boot/dts/ti/k3-am625-verdin-dev-mezzanine-panel-cap-touch-10inch-lvds.dtso
 create mode 100644 arch/arm64/boot/dts/ti/k3-am625-verdin-dev-nau8822-btl.dtso
 create mode 100644 arch/arm64/boot/dts/ti/k3-am625-verdin-dsi-to-lvds-panel-cap-touch-10inch.dtso
 create mode 100644 arch/arm64/boot/dts/ti/k3-am625-verdin-ov5640-24mhz.dtso
 create mode 100644 arch/arm64/boot/dts/ti/k3-am625-verdin-ov5640.dtsi
 create mode 100644 arch/arm64/boot/dts/ti/k3-am625-verdin-ov5640.dtso
 create mode 100644 arch/arm64/boot/dts/ti/k3-am625-verdin-panel-cap-touch-10inch-dsi.dtso
 create mode 100644 arch/arm64/boot/dts/ti/k3-am625-verdin-panel-cap-touch-10inch-lvds.dtso
 create mode 100644 arch/arm64/boot/dts/ti/k3-am625-verdin-panel-cap-touch-7inch-dsi.dtso
 create mode 100644 arch/arm64/boot/dts/ti/k3-am625-verdin-uart4-mcu.dtso

-- 
2.54.0



             reply	other threads:[~2026-05-22 14:04 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-05-22 13:20 Vitor Soares [this message]
2026-05-22 13:20 ` [PATCH v2 01/11] arm64: dts: ti: k3-am62-verdin: Add Toradex DSI to LVDS adapter with 10.1" display Vitor Soares
2026-05-22 15:51   ` Vitor Soares
2026-05-22 13:20 ` [PATCH v2 02/11] arm64: dts: ti: k3-am62-verdin: Add Toradex Capacitive Touch Display 10.1" LVDS Vitor Soares
2026-05-22 13:20 ` [PATCH v2 03/11] dt-bindings: vendor-prefixes: Add Riverdi Vitor Soares
2026-05-22 13:20 ` [PATCH v2 04/11] dt-bindings: display: panel-lvds: Add Riverdi RVT70HSLNWCA0 and RVT101HVLNWC00 Vitor Soares
2026-05-22 13:20 ` [PATCH v2 05/11] arm64: dts: ti: k3-am62-verdin: Add Toradex Capacitive Touch Display 10.1" DSI Vitor Soares
2026-05-22 13:20 ` [PATCH v2 06/11] arm64: dts: ti: k3-am62-verdin: Add Toradex Capacitive Touch Display 7" DSI Vitor Soares
2026-05-22 13:20 ` [PATCH v2 07/11] arm64: dts: ti: k3-am62-verdin: Add NAU8822 Bridge Tied Load Vitor Soares
2026-05-22 13:20 ` [PATCH v2 08/11] arm64: dts: ti: k3-am62-verdin: Reserve UART_4 for Cortex-M4F Vitor Soares
2026-05-22 13:20 ` [PATCH v2 09/11] arm64: dts: ti: k3-am62-verdin: Add Toradex OV5640 CSI Cameras Vitor Soares
2026-05-22 13:20 ` [PATCH v2 10/11] arm64: dts: ti: k3-am62-verdin: Add Toradex Verdin Mezzanine CAN Vitor Soares
2026-05-22 13:20 ` [PATCH v2 11/11] arm64: dts: ti: k3-am62-verdin: Add Mezzanine with Toradex Display 10.1" LVDS Vitor Soares

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260522132014.226721-13-ivitro@gmail.com \
    --to=ivitro@gmail.com \
    --cc=airlied@gmail.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=jesszhan0024@gmail.com \
    --cc=kristo@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=maarten.lankhorst@linux.intel.com \
    --cc=mripard@kernel.org \
    --cc=neil.armstrong@linaro.org \
    --cc=nm@ti.com \
    --cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
    --cc=robh@kernel.org \
    --cc=simona@ffwll.ch \
    --cc=thierry.reding@gmail.com \
    --cc=tzimmermann@suse.de \
    --cc=vigneshr@ti.com \
    --cc=vitor.soares@toradex.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox