Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Guoniu Zhou <guoniu.zhou@oss.nxp.com>
To: Mauro Carvalho Chehab <mchehab@kernel.org>,
	 Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	 Conor Dooley <conor+dt@kernel.org>,
	Shawn Guo <shawnguo@kernel.org>,
	 Sascha Hauer <s.hauer@pengutronix.de>,
	 Pengutronix Kernel Team <kernel@pengutronix.de>,
	 Fabio Estevam <festevam@gmail.com>,
	 Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
	 Frank Li <frank.li@nxp.com>
Cc: imx@lists.linux.dev, linux-media@vger.kernel.org,
	 devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	 linux-kernel@vger.kernel.org, Guoniu Zhou <guoniu.zhou@nxp.com>,
	 Frank Li <Frank.Li@nxp.com>,
	 Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Subject: [PATCH v8 0/2] media: nxp: Add CSI Pixel Formatter support
Date: Mon, 25 May 2026 16:12:21 +0800	[thread overview]
Message-ID: <20260525-csi_formatter-v8-0-6b646231224b@oss.nxp.com> (raw)

CSI Pixel Formatter is a module found on i.MX95. It could unpack the
pixels received by the formatter and reformat them to meet the pixel
link format requirement.

This patch series adds a new V4L2 driver for CSI Pixel Formatter.

v4l2-compliance 1.28.1-5233, 64 bits, 64-bit time_t
v4l2-compliance SHA: fc15e229d9d3 2024-07-23 19:22:15

Compliance test for device /dev/v4l-subdev9:

Driver Info:
	Driver version   : 7.1.0
	Capabilities     : 0x00000002
		Streams Support
	Client Capabilities: 0x0000000000000003
streams interval-uses-which
Required ioctls:
	test VIDIOC_SUDBEV_QUERYCAP: OK
	test invalid ioctls: OK

Allow for multiple opens:
	test second /dev/v4l-subdev9 open: OK
	test VIDIOC_SUBDEV_QUERYCAP: OK
	test for unlimited opens: OK

Debug ioctls:
	test VIDIOC_LOG_STATUS: OK (Not Supported)

Input ioctls:
	test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
	test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
	test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
	test VIDIOC_ENUMAUDIO: OK (Not Supported)
	test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
	test VIDIOC_G/S_AUDIO: OK (Not Supported)
	Inputs: 0 Audio Inputs: 0 Tuners: 0

Output ioctls:
	test VIDIOC_G/S_MODULATOR: OK (Not Supported)
	test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
	test VIDIOC_ENUMAUDOUT: OK (Not Supported)
	test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
	test VIDIOC_G/S_AUDOUT: OK (Not Supported)
	Outputs: 0 Audio Outputs: 0 Modulators: 0

Input/Output configuration ioctls:
	test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
	test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
	test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
	test VIDIOC_G/S_EDID: OK (Not Supported)

Sub-Device routing ioctls:
	test Try VIDIOC_SUBDEV_G_ROUTING/VIDIOC_SUBDEV_S_ROUTING: OK
	test Active VIDIOC_SUBDEV_G_ROUTING/VIDIOC_SUBDEV_S_ROUTING: OK

Control ioctls:
	test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK (Not Supported)
	test VIDIOC_QUERYCTRL: OK (Not Supported)
	test VIDIOC_G/S_CTRL: OK (Not Supported)
	test VIDIOC_G/S/TRY_EXT_CTRLS: OK (Not Supported)
	test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported)
	test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
	Standard Controls: 0 Private Controls: 0

Format ioctls:
	test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK (Not Supported)
	test VIDIOC_G/S_PARM: OK (Not Supported)
	test VIDIOC_G_FBUF: OK (Not Supported)
	test VIDIOC_G_FMT: OK (Not Supported)
	test VIDIOC_TRY_FMT: OK (Not Supported)
	test VIDIOC_S_FMT: OK (Not Supported)
	test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
	test Cropping: OK (Not Supported)
	test Composing: OK (Not Supported)
	test Scaling: OK (Not Supported)

Codec ioctls:
	test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
	test VIDIOC_G_ENC_INDEX: OK (Not Supported)
	test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)

Buffer ioctls:
	test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK (Not Supported)
	test CREATE_BUFS maximum buffers: OK
	test VIDIOC_REMOVE_BUFS: OK
	test VIDIOC_EXPBUF: OK (Not Supported)
	test Requests: OK (Not Supported)

Total for device /dev/v4l-subdev9: 47, Succeeded: 47, Failed: 0, Warnings: 0

Signed-off-by: Guoniu Zhou <guoniu.zhou@nxp.com>
---
Changes in v8:
- Rebase to latest media/next
- Use standard port reference instead of video-interfaces.yaml
- Add parent syscon node in example to show device integration
- Remove fmt field and look up format from subdev state instead
- Unify function and structure naming to use csi_formatter_ prefix
- Remove misleading alignment comment from set_fmt function
- Optimize get_frame_desc to call once per start_stream
- Replace V4L2_FRAME_DESC_ENTRY_MAX with CSI_FORMATTER_VC_NUM in loops
- Remove redundant debug message in enable_streams
- Use MEDIA_PAD_FL_MUST_CONNECT flag instead of manual link check
- Link to v7: https://lore.kernel.org/r/20260518-csi_formatter-v7-0-562b750557e3@oss.nxp.com

Changes in v7:
- Change compatible to imx95-csi-formatter as IP is i.MX95 specific per Marco's suggestion
  Link: https://lore.kernel.org/linux-media/20260511-csi_formatter-v6-0-01028e312e2b@oss.nxp.com/T/#mcd135b3de179b3cb69daa1fd6e0e8e27c85b3332
- Update references from imx9 to imx95 for consistency with dt-bindings
- Enable PM runtime before async registration
- Link to v6: https://lore.kernel.org/r/20260511-csi_formatter-v6-0-01028e312e2b@oss.nxp.com

Changes in v6:
- Rebase to latest media/next
- Update v4l2-compliace test
- Remove unused header includes
- Unify macro naming: VCx/VCX -> VC and parameter x -> vc
- Remove unused format field from csi_formatter struct
- Use compact initialization for formats array
- Make find_csi_format() return NULL instead of default format
- Use unsigned int for array index in find_csi_format()
- Add err_ prefix to error handling labels
- Add v4l2_subdev_cleanup() and reorder cleanup sequence
- Update enable_streams debug output format
- Rename VC_MAX to VC_NUM and fix boundary check
- Update CSI formatter Kconfig description
- Use v4l2_subdev_get_frame_desc_passthrough() helper
- Fix error paths in async registration and probe
- Add mutex to protect enabled_streams
- Switch to devm_pm_runtime_enable()
- Remove redundant num_routes check in set_routing
- Optimize get_index_by_dt() and add warning for unsupported type
- csi_formatter_start/stop_stream: Process all streams in mask
- Link to v5: https://lore.kernel.org/r/20260123-csi_formatter-v5-0-d5b803f867bf@nxp.com

Changes in v5:
- Remove CSI_FORMATTER_DRV_NAME macro since only use once.
- Remove sd->owner = THIS_MODULE;
- Simplify code by using DEFINE_RUNTIME_DEV_PM_OPS macro.
- Link to v4: https://lore.kernel.org/r/20260122-csi_formatter-v4-0-6f6fcad1c33a@nxp.com

Changes in v4:
- Rebase to latest media/next.
- Add comments to describe the index field in formatter_dt_to_index_map array.
- Link to v3: https://lore.kernel.org/r/20251219-csi_formatter-v3-0-8680d6d87091@nxp.com

Changes in v3:
- Rename nxp,imx9-csi-formatter.yaml to fsl,imx9-csi-formatter.yaml.
- Drop clock-names property.
- Drop macro IMX95_PD_CAMERA definition and use a constant directly.
  [PATCH 1/2] media: dt-bindings: Add CSI Pixel Formatter DT bindings
- Remove the assignment driver.owner = THIS_MODULE.
- Assign struct fwnode_handle *ep __free(fwnode_handle) when definition.
- Update yaml file name for csi formatter in MAINTAINERS.
  [PATCH 2/2] media: nxp: Add i.MX9 CSI pixel formatter v4l2 driver
- Link to v2: https://lore.kernel.org/r/20251217-csi_formatter-v2-0-62168af80210@nxp.com

Changes in v2:
- Delete "|" for description key. 
- Add empty line between child node and property.
- Delete labels for endpoint of child nodes.
  [PATCH 1/2] media: dt-bindings: Add CSI Pixel Formatter DT bindings

- Update commit message.
- Use the value defined by bellow macros directly since they are used only once.
  #define CSI_FORMATTER_DEF_MBUS_CODE	MEDIA_BUS_FMT_UYVY8_1X16
  #define CSI_FORMATTER_DEF_PIX_WIDTH	1920U
  #define CSI_FORMATTER_DEF_PIX_HEIGHT	1080U
  #define CSI_FORMATTER_MAX_PIX_WIDTH	0xffff
  #define CSI_FORMATTER_MAX_PIX_HEIGHT	0xffff
- Use macro pm_ptr() to fix build warning when CONFIG_PM is disabled. 
- Finish route loop by break statement, instead of goto.
- Return dev_err_probe() when meet errors in probe() function instead of dev_err().
- Remove MODULE_ALIAS().
- Refine .enable(.dsable)_stream callback implementation, include bellow changes:
  Add stream checking.
  Fix potential pm runtime count unbalance issue.
  Add stop stream error handling when enabling remote subdev stream.
- Use __free(fwnode_handle) to drop reference to a device node automatically.
  [PATCH 2/2] media: nxp: Add i.MX9 CSI pixel formatter v4l2 driver

- Link to v1: https://lore.kernel.org/r/20251203-csi_formatter-v1-0-eb9e1147b49e@nxp.com

---
Guoniu Zhou (2):
      media: dt-bindings: Add CSI Pixel Formatter DT bindings
      media: nxp: Add i.MX95 CSI pixel formatter v4l2 driver

 .../bindings/media/fsl,imx95-csi-formatter.yaml    |  92 +++
 MAINTAINERS                                        |   8 +
 drivers/media/platform/nxp/Kconfig                 |  14 +
 drivers/media/platform/nxp/Makefile                |   1 +
 drivers/media/platform/nxp/imx95-csi-formatter.c   | 757 +++++++++++++++++++++
 5 files changed, 872 insertions(+)
---
base-commit: a3d78e74dd3ed04797ea351edb7f0a19b961c063
change-id: 20251125-csi_formatter-e6d29316dce6

Best regards,
-- 
Guoniu Zhou <guoniu.zhou@oss.nxp.com>



             reply	other threads:[~2026-05-25  8:10 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-05-25  8:12 Guoniu Zhou [this message]
2026-05-25  8:12 ` [PATCH v8 1/2] media: dt-bindings: Add CSI Pixel Formatter DT bindings Guoniu Zhou
2026-05-25 10:43   ` Rob Herring (Arm)
2026-05-26  9:13   ` Krzysztof Kozlowski
2026-05-26  9:33     ` [EXT] " G.N. Zhou
2026-05-26  9:44     ` Laurent Pinchart
2026-05-27  9:37       ` Krzysztof Kozlowski
2026-05-27  9:39         ` Krzysztof Kozlowski
2026-05-27 11:45         ` Laurent Pinchart
2026-05-25  8:12 ` [PATCH v8 2/2] media: nxp: Add i.MX95 CSI pixel formatter v4l2 driver Guoniu Zhou

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260525-csi_formatter-v8-0-6b646231224b@oss.nxp.com \
    --to=guoniu.zhou@oss.nxp.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=frank.li@nxp.com \
    --cc=guoniu.zhou@nxp.com \
    --cc=imx@lists.linux.dev \
    --cc=kernel@pengutronix.de \
    --cc=krzk+dt@kernel.org \
    --cc=krzysztof.kozlowski@oss.qualcomm.com \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=robh@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox