[PATCH] arm64: dts: mediatek: mt7986a-bananapi-bpi-r3: add ramoops region

[Martino Dell'Ambrogio <tillo@tillo.ch>]

Reserve 64 KiB of RAM just below the ARM Trusted Firmware secmon region
(0x42ff0000-0x43000000) for persistent kernel log storage via pstore/ramoops,
allowing post-panic console output and oops dumps to be recovered after a
warm reset. Without it, kernel crash logs on this board are lost when the
SoC reboots.

The carve-out is divided into 8 KiB kmsg records, a 32 KiB rolling console,
8 KiB ftrace, and 8 KiB pmsg, leaving the remainder for the per-record
Reed-Solomon ECC parity (ecc-size=16) which significantly improves dump
readability when the panic path truncates writes mid-record.

The region sits immediately below the ATF block already declared at
0x43000000 in mt7986a.dtsi, so no other reserved-memory child is moved or
resized. BPI-R3 ships with 2 GiB of DRAM starting at 0x40000000, well above
0x43000000, so the region is always within installed memory.

For the carve-out to actually preserve content across a reset, the boot
loader must avoid touching this region on warm reset; on standard BPI-R3
boards with the stock OpenWrt U-Boot fork this already holds.

Signed-off-by: Martino Dell'Ambrogio <tillo@tillo.ch>
---
 .../boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts    | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts
index 19f538d..31ee189 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts
@@ -140,6 +140,18 @@ sfp2: sfp-2 {
 	};
 };
 
+&{/reserved-memory} {
+	ramoops@42ff0000 {
+		compatible = "ramoops";
+		reg = <0 0x42ff0000 0 0x10000>;
+		record-size = <0x2000>;
+		console-size = <0x8000>;
+		ftrace-size = <0x2000>;
+		pmsg-size = <0x2000>;
+		ecc-size = <16>;
+	};
+};
+
 &cpu_thermal {
 	cooling-maps {
 		map-cpu-active-high {
-- 
2.47.3