Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Rosen Penev <rosenp@gmail.com>
To: linux-serial@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Jiri Slaby <jirislaby@kernel.org>, Frank Li <Frank.Li@nxp.com>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	Fabio Estevam <festevam@gmail.com>,
	linux-kernel@vger.kernel.org (open list:TTY LAYER AND SERIAL
	DRIVERS),
	imx@lists.linux.dev (open list:ARM/FREESCALE IMX / MXC ARM
	ARCHITECTURE),
	linux-arm-kernel@lists.infradead.org (moderated
	list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE)
Subject: [PATCH 2/3] serial: mxs-auart: use devm resources for iomem and GPIO IRQs
Date: Tue,  2 Jun 2026 19:58:56 -0700	[thread overview]
Message-ID: <20260603025857.287148-3-rosenp@gmail.com> (raw)
In-Reply-To: <20260603025857.287148-1-rosenp@gmail.com>

Replace platform_get_resource + ioremap with
devm_platform_get_and_ioremap_resource and convert GPIO IRQ
request_irq/free_irq to devm_request_irq. This eliminates the
mxs_auart_free_gpio_irq function and its call sites, and the
out_iounmap error label. Simplify the remove function accordingly.

Assisted-by: opencode:big-pickle
Signed-off-by: Rosen Penev <rosenp@gmail.com>
---
 drivers/tty/serial/mxs-auart.c | 55 ++++++++--------------------------
 1 file changed, 12 insertions(+), 43 deletions(-)

diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c
index 1390fa000a5b..4499e3206e85 100644
--- a/drivers/tty/serial/mxs-auart.c
+++ b/drivers/tty/serial/mxs-auart.c
@@ -1517,15 +1517,6 @@ static int mxs_auart_init_gpios(struct mxs_auart_port *s, struct device *dev)
 	return 0;
 }
 
-static void mxs_auart_free_gpio_irq(struct mxs_auart_port *s)
-{
-	enum mctrl_gpio_idx i;
-
-	for (i = 0; i < UART_GPIO_MAX; i++)
-		if (s->gpio_irq[i] >= 0)
-			free_irq(s->gpio_irq[i], s);
-}
-
 static int mxs_auart_request_gpio_irq(struct mxs_auart_port *s)
 {
 	int *irq = s->gpio_irq;
@@ -1537,21 +1528,13 @@ static int mxs_auart_request_gpio_irq(struct mxs_auart_port *s)
 			continue;
 
 		irq_set_status_flags(irq[i], IRQ_NOAUTOEN);
-		err = request_irq(irq[i], mxs_auart_irq_handle,
-				IRQ_TYPE_EDGE_BOTH, dev_name(s->dev), s);
+		err = devm_request_irq(s->dev, irq[i], mxs_auart_irq_handle,
+				       IRQ_TYPE_EDGE_BOTH, dev_name(s->dev), s);
 		if (err)
 			dev_err(s->dev, "%s - Can't get %d irq\n",
 				__func__, irq[i]);
 	}
 
-	/*
-	 * If something went wrong, rollback.
-	 * Be careful: i may be unsigned.
-	 */
-	while (err && (i-- > 0))
-		if (irq[i] >= 0)
-			free_irq(irq[i], s);
-
 	return err;
 }
 
@@ -1586,7 +1569,7 @@ static int mxs_auart_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
-	s->devtype = (enum mxs_auart_type)of_device_get_match_data(&pdev->dev);
+	s->devtype = (unsigned long)of_device_get_match_data(&pdev->dev);
 
 	ret = mxs_get_clks(s, pdev);
 	if (ret)
@@ -1596,18 +1579,12 @@ static int mxs_auart_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
-	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!r) {
-		ret = -ENXIO;
+	s->port.membase = devm_platform_get_and_ioremap_resource(pdev, 0, &r);
+	if (IS_ERR(s->port.membase)) {
+		ret = PTR_ERR(s->port.membase);
 		goto out_disable_clk;
 	}
-
 	s->port.mapbase = r->start;
-	s->port.membase = ioremap(r->start, resource_size(r));
-	if (!s->port.membase) {
-		ret = -ENOMEM;
-		goto out_disable_clk;
-	}
 	s->port.ops = &mxs_auart_ops;
 	s->port.iotype = UPIO_MEM;
 	s->port.fifosize = MXS_AUART_FIFO_SIZE;
@@ -1622,21 +1599,21 @@ static int mxs_auart_probe(struct platform_device *pdev)
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0) {
 		ret = irq;
-		goto out_iounmap;
+		goto out_disable_clk;
 	}
 
 	s->port.irq = irq;
 	ret = devm_request_irq(&pdev->dev, irq, mxs_auart_irq_handle, 0,
 			       dev_name(&pdev->dev), s);
 	if (ret)
-		goto out_iounmap;
+		goto out_disable_clk;
 
 	platform_set_drvdata(pdev, s);
 
 	ret = mxs_auart_init_gpios(s, &pdev->dev);
 	if (ret) {
 		dev_err(&pdev->dev, "Failed to initialize GPIOs.\n");
-		goto out_iounmap;
+		goto out_disable_clk;
 	}
 
 	/*
@@ -1644,7 +1621,7 @@ static int mxs_auart_probe(struct platform_device *pdev)
 	 */
 	ret = mxs_auart_request_gpio_irq(s);
 	if (ret)
-		goto out_iounmap;
+		goto out_disable_clk;
 
 	auart_port[s->port.line] = s;
 
@@ -1667,11 +1644,7 @@ static int mxs_auart_probe(struct platform_device *pdev)
 	return 0;
 
 out_free_qpio_irq:
-	mxs_auart_free_gpio_irq(s);
-	auart_port[pdev->id] = NULL;
-
-out_iounmap:
-	iounmap(s->port.membase);
+	auart_port[s->port.line] = NULL;
 
 out_disable_clk:
 	clk_disable_unprepare(s->clk);
@@ -1683,11 +1656,7 @@ static void mxs_auart_remove(struct platform_device *pdev)
 	struct mxs_auart_port *s = platform_get_drvdata(pdev);
 
 	uart_remove_one_port(&auart_driver, &s->port);
-	auart_port[pdev->id] = NULL;
-	mxs_auart_free_gpio_irq(s);
-	iounmap(s->port.membase);
-	if (is_asm9260_auart(s))
-		clk_disable_unprepare(s->clk);
+	auart_port[s->port.line] = NULL;
 }
 
 static struct platform_driver mxs_auart_driver = {
-- 
2.54.0



  parent reply	other threads:[~2026-06-03  2:59 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-06-03  2:58 [PATCH 0/3] serial: mxs-auart: devm conversion, clock rework, and IRQ ordering fixes Rosen Penev
2026-06-03  2:58 ` [PATCH 1/3] serial: mxs-auart: rework clock handling in mxs_get_clks and probe Rosen Penev
2026-06-03  2:58 ` Rosen Penev [this message]
2026-06-03  2:58 ` [PATCH 3/3] serial: mxs-auart: fix IRQ registration ordering and manage console clock Rosen Penev

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260603025857.287148-3-rosenp@gmail.com \
    --to=rosenp@gmail.com \
    --cc=Frank.Li@nxp.com \
    --cc=festevam@gmail.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=imx@lists.linux.dev \
    --cc=jirislaby@kernel.org \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-serial@vger.kernel.org \
    --cc=s.hauer@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox