[PATCH v6 0/3] arm64: dts/bindings: Add support for BeagleBadge

[Judith Mendez <jm@ti.com>]

Hi,

BeagleBoard.org BeagleBadge[1] is a compact, affordable open source
hardware [2] single board computer based on the Texas Instruments AM62L3
SoC designed for IoT and embedded applications. Add base support for
the same.

SD boot:
Link: https://gist.github.com/jmenti/e9e95848336fda0e4b5acb37f2fe64a0

This patch series adds:
- Device tree bindings update for am62l3-badge
- Device tree source for BeagleBadge board
- Defconfig: drivers for BeagleBadge

Changelog since v5:
DTS
- Fixed aliases/chosen nodes
- Sort Makefile items alphabetically
- Use dual license: GPL-2.0-only or MIT

v5
Link: https://lore.kernel.org/all/20260526235417.1326187-1-jm@ti.com/
v4
Link: https://lore.kernel.org/all/20260515153541.294698-1-jm@ti.com/
v3
Link: https://lore.kernel.org/all/20260513233447.2713737-1-jm@ti.com/
V2
Link: https://lore.kernel.org/all/20260508230341.1891450-1-jm@ti.com/
V1
Link: https://lore.kernel.org/all/20260501233148.4180391-1-jm@ti.com/

Patch series depends on:
Link: https://lore.kernel.org/all/20260513231154.2703292-1-jm@ti.com/

[1] https://www.beagleboard.org/boards/beaglebadge
[2] https://github.com/beagleboard/BeagleBadge/blob/main/design/BeagleBadge_RevA_V0.7_SCH_251107.pdf

Judith Mendez (3):
  dt-bindings: arm: ti: Add am62l3-beaglebadge
  arm64: dts: ti: Add k3-am62l3-beaglebadge
  arm64: defconfig: Enable drivers for BeagleBadge

 .../devicetree/bindings/arm/ti/k3.yaml        |   1 +
 arch/arm64/boot/dts/ti/Makefile               |   1 +
 .../boot/dts/ti/k3-am62l3-beaglebadge.dts     | 657 ++++++++++++++++++
 arch/arm64/configs/defconfig                  |   5 +
 4 files changed, 664 insertions(+)
 create mode 100644 arch/arm64/boot/dts/ti/k3-am62l3-beaglebadge.dts

-- 
2.54.0