Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Hrushiraj Gandhi <hrushirajg23@gmail.com>
To: Heiko Stuebner <heiko@sntech.de>
Cc: Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Rob Herring <robh@kernel.org>, Conor Dooley <conor+dt@kernel.org>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org,
	Hrushiraj Gandhi <hrushirajg23@gmail.com>
Subject: [PATCH v7 0/2] arm64: dts: rockchip: add Vicharak Axon board support
Date: Mon,  8 Jun 2026 11:39:38 +0530	[thread overview]
Message-ID: <20260608060940.52549-1-hrushirajg23@gmail.com> (raw)

This series adds initial device tree support for the Vicharak Axon
single-board computer, which is based on the Rockchip RK3588 SoC.

The Vicharak Axon is a feature-rich SBC targeting developer and embedded
use cases. It ships with:

  - Rockchip RK3588 (4x Cortex-A76 + 4x Cortex-A55)
  - RK806 PMIC providing all SoC power domains
  - eMMC 5.1 (on-board) and microSD slot
  - Gigabit Ethernet via RGMII (RTL8211F)
  - Dual HDMI 2.1 output and one HDMI 2.0 input (receiver)
  - PCIe 3.0 x4 and two PCIe 2.0 slots
  - SATA 3.0
  - USB 2.0 host ports (EHCI/OHCI)
  - NXP PCA9554 I/O expander for status LEDs
  - Haoyu HYM8563 RTC

Changes since v6:
- Dropped vendor-prefixes patch; the vicharak prefix was already
  submitted upstream by another contributor.
- Added Acked-by from Krzysztof Kozlowski to the binding patch.
- Removed redundant status = okay from newly-defined nodes (leds,
  hym8563, pca9554) as noted by Krzysztof Kozlowski.
- Removed stale mmc2 = &sdio alias (sdio was removed in v4).
- Removed leftover #include <dt-bindings/usb/pd.h> (TypeC removed).
- Removed unused fixed regulators: pcie20_avdd0v85, pcie20_avdd1v8,
  pcie30_avdd0v75, pcie30_avdd1v8, sata_vcc_5v0, vcc0_4v0/vcc4v0_sys.

Changes since v5:
- Enabled i2s5_8ch and i2s6_8ch CPU DAIs to resolve probe deferral
  for hdmi0_sound and hdmi1_sound.

Changes since v4:
- Re-enabled combphy2_psu, required PHY for pcie2x1l1.
- Fixed alphabetical sorting of rk3588-vicharak-axon.dtb in Makefile.

Changes since v3:
- Removed sdio_pwrseq and wireless-wlan pinctrl nodes (Wi-Fi removed).
- Removed unused u2phy0, u2phy0_otg, u2phy1, u2phy1_otg nodes.

Changes since v2:
- Split the dt-bindings patch into separate patches as requested.
- Removed invalid enable-gpios from HDMI nodes.
- Fixed copy-paste error in rk806_dvs1_null pinctrl node.

Changes since v1:
- Renamed rk3588-axon.dts to rk3588-vicharak-axon.dts.
- Added binding patch for board (rockchip.yaml).
- Renamed regulator nodes to the standard regulator-name pattern.
- Removed mem-supply properties from cpu nodes.
- Fixed pcie20_avdd0v85 vin-supply mismatch.
- Removed obsolete regulator-compatible property.
- Removed invalid regulator-init-microvolt property.
- Removed dangling enable-active-high from fixed regulators.
- Cleaned up unneeded i2c3 / es8388 nodes.
- Added missing vpcie3v3-supply properties to PCIe nodes.

Hrushiraj Gandhi (2):
  dt-bindings: arm: rockchip: add Vicharak Axon board
  arm64: dts: rockchip: add Vicharak Axon board

 .../devicetree/bindings/arm/rockchip.yaml     |   5 +
 arch/arm64/boot/dts/rockchip/Makefile         |   1 +
 .../dts/rockchip/rk3588-vicharak-axon.dts     | 926 ++++++++++++++++++
 3 files changed, 932 insertions(+)
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3588-vicharak-axon.dts

-- 
2.47.3



             reply	other threads:[~2026-06-08  6:10 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-06-08  6:09 Hrushiraj Gandhi [this message]
2026-06-08  6:09 ` [PATCH v7 1/2] dt-bindings: arm: rockchip: add Vicharak Axon board Hrushiraj Gandhi
2026-06-08  6:09 ` [PATCH v7 2/2] arm64: dts: " Hrushiraj Gandhi
2026-06-20  5:37 ` [PATCH v7 0/2] arm64: dts: rockchip: add Vicharak Axon board support Hrushiraj Gandhi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260608060940.52549-1-hrushirajg23@gmail.com \
    --to=hrushirajg23@gmail.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=heiko@sntech.de \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox