From: Lorenzo Bianconi <lorenzo@kernel.org>
To: Andrew Lunn <andrew+netdev@lunn.ch>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>,
Paolo Abeni <pabeni@redhat.com>,
Lorenzo Bianconi <lorenzo@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org, netdev@vger.kernel.org,
Madhur Agrawal <madhur.agrawal@airoha.com>
Subject: [PATCH net-next v4 0/2] airoha: add the capability to configure GDM3/GDM4 as WAN/LAN on demand
Date: Wed, 10 Jun 2026 15:33:35 +0200 [thread overview]
Message-ID: <20260610-airoha-ethtool-priv_flags-v4-0-60e89cf28fea@kernel.org> (raw)
Add the capability to configure GDM3/GDM4 as WAN/LAN on demand when QoS
offload is created or destroyed.
Make dev->qdma an RCU pointer so the TX path can safely dereference it
without holding RTNL.
Introduce airoha_qdma_start() and airoha_qdma_stop() helpers.
---
Changes in v4:
- Move back QDMA TX/RX DMA enable to airoha_dev_open()/airoha_dev_stop().
- Configure GDM3/4 as WAN if GDM2 is not available in ndo_init()
callback.
- Protect qdma pointer in airoha_gdm_dev struct using RCU.
- Rely on rtnl_dereference() to access qdma pointer in the control path.
- Add airoha_qdma_start() and airoha_qdma_stop() utility routines in
patch 1/2
- Link to v3: https://lore.kernel.org/r/20260608-airoha-ethtool-priv_flags-v3-1-3e8e3dc3f715@kernel.org
Changes in v3:
- Do not introduce ethtool private flags support to configure LAN/WAN
for GDM3/4 and rely on tc qdisc offload for it instead.
- Set GDM3/4 ports as LAN by default.
- Move QDMA TX/RX DMA enable from airoha_dev_open() to airoha_probe()
and the corresponding disable from airoha_dev_stop() to airoha_qdma_cleanup().
- Link to v2: https://lore.kernel.org/r/20260607-airoha-ethtool-priv_flags-v2-1-742c7aa1e182@kernel.org
Changes in v2:
- Rework airoha_dev_set_wan_flag routine
- Enable GDM_STRIP_CRC_MASK in airoha_disable_gdm2_loopback()
- Do not always reset REG_SRC_PORT_FC_MAP6 in
airoha_disable_gdm2_loopback() but use the same condition used in
airoha_enable_gdm2_loopback().
- Link to v1: https://lore.kernel.org/r/20260606-airoha-ethtool-priv_flags-v1-1-401b2c9fe9f1@kernel.org
---
Lorenzo Bianconi (2):
net: airoha: refactor QDMA start/stop into reusable helpers
net: airoha: defer GDM3/GDM4 WAN mode and GDM2 loopback to QoS offload
drivers/net/ethernet/airoha/airoha_eth.c | 273 +++++++++++++++++++++++++-----
drivers/net/ethernet/airoha/airoha_eth.h | 24 ++-
drivers/net/ethernet/airoha/airoha_ppe.c | 18 +-
drivers/net/ethernet/airoha/airoha_regs.h | 1 +
4 files changed, 267 insertions(+), 49 deletions(-)
---
base-commit: 5855479abc796c3b5d7b2f2ca147d68fc56cae1f
change-id: 20260606-airoha-ethtool-priv_flags-b6aa70caa780
Best regards,
--
Lorenzo Bianconi <lorenzo@kernel.org>
next reply other threads:[~2026-06-10 13:34 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-10 13:33 Lorenzo Bianconi [this message]
2026-06-10 13:33 ` [PATCH net-next v4 1/2] net: airoha: refactor QDMA start/stop into reusable helpers Lorenzo Bianconi
2026-06-11 15:21 ` Lorenzo Bianconi
2026-06-10 13:33 ` [PATCH net-next v4 2/2] net: airoha: defer GDM3/GDM4 WAN mode and GDM2 loopback to QoS offload Lorenzo Bianconi
2026-06-11 15:04 ` Lorenzo Bianconi
2026-06-10 14:08 ` [PATCH net-next v4 0/2] airoha: add the capability to configure GDM3/GDM4 as WAN/LAN on demand Alexander Lobakin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260610-airoha-ethtool-priv_flags-v4-0-60e89cf28fea@kernel.org \
--to=lorenzo@kernel.org \
--cc=andrew+netdev@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=madhur.agrawal@airoha.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox