From: Zi-Yu Chen <zychennvt@gmail.com>
To: Andi Shyti <andi.shyti@kernel.org>
Cc: Jacky Huang <ychuang3@nuvoton.com>,
Shan-Chun Hung <schung@nuvoton.com>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Philipp Zabel <p.zabel@pengutronix.de>,
linux-i2c@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, Zi-Yu Chen <zychennvt@gmail.com>
Subject: [PATCH v4 3/3] arm64: dts: nuvoton: Add I2C nodes for MA35D1 SoC
Date: Wed, 10 Jun 2026 11:02:08 +0800 [thread overview]
Message-ID: <20260610030208.2020275-4-zychennvt@gmail.com> (raw)
In-Reply-To: <20260610030208.2020275-1-zychennvt@gmail.com>
Add I2C controller nodes to the MA35D1 SoC dtsi file.
Also, enable the I2C2 interface on the MA35D1 SOM board and
configure its pinctrl to allow communication with the onboard
NAU8822 audio codec
Signed-off-by: Zi-Yu Chen <zychennvt@gmail.com>
---
.../boot/dts/nuvoton/ma35d1-som-256m.dts | 20 ++++++
arch/arm64/boot/dts/nuvoton/ma35d1.dtsi | 72 +++++++++++++++++++
2 files changed, 92 insertions(+)
diff --git a/arch/arm64/boot/dts/nuvoton/ma35d1-som-256m.dts b/arch/arm64/boot/dts/nuvoton/ma35d1-som-256m.dts
index f6f20a17e501..4b9ff6d00631 100644
--- a/arch/arm64/boot/dts/nuvoton/ma35d1-som-256m.dts
+++ b/arch/arm64/boot/dts/nuvoton/ma35d1-som-256m.dts
@@ -55,6 +55,18 @@ &clk {
"integer";
};
+&i2c2 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+
+ nau8822: nau8822@1a {
+ compatible = "nuvoton,nau8822";
+ reg = <0x1a> ;
+ nuvoton,spk-btl;
+ };
+};
+
&pinctrl {
uart-grp {
pinctrl_uart0: uart0-pins {
@@ -98,6 +110,14 @@ pinctrl_uart16: uart16-pins {
power-source = <1>;
};
};
+
+ i2c-grp {
+ pinctrl_i2c2: i2c2-pins {
+ nuvoton,pins = <1 8 4>,
+ <1 9 4>;
+ bias-disable;
+ };
+ };
};
&uart0 {
diff --git a/arch/arm64/boot/dts/nuvoton/ma35d1.dtsi b/arch/arm64/boot/dts/nuvoton/ma35d1.dtsi
index e51b98f5bdce..fe9e0895beb4 100644
--- a/arch/arm64/boot/dts/nuvoton/ma35d1.dtsi
+++ b/arch/arm64/boot/dts/nuvoton/ma35d1.dtsi
@@ -372,6 +372,78 @@ uart15: serial@407f0000 {
status = "disabled";
};
+ i2c0: i2c@40800000 {
+ compatible = "nuvoton,ma35d1-i2c";
+ reg = <0x0 0x40800000 0x0 0x1000>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk I2C0_GATE>;
+ clock-frequency = <100000>;
+ resets = <&sys MA35D1_RESET_I2C0>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c1: i2c@40810000 {
+ compatible = "nuvoton,ma35d1-i2c";
+ reg = <0x0 0x40810000 0x0 0x1000>;
+ interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk I2C1_GATE>;
+ clock-frequency = <100000>;
+ resets = <&sys MA35D1_RESET_I2C1>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c2: i2c@40820000 {
+ compatible = "nuvoton,ma35d1-i2c";
+ reg = <0x0 0x40820000 0x0 0x1000>;
+ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk I2C2_GATE>;
+ clock-frequency = <100000>;
+ resets = <&sys MA35D1_RESET_I2C2>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c3: i2c@40830000 {
+ compatible = "nuvoton,ma35d1-i2c";
+ reg = <0x0 0x40830000 0x0 0x1000>;
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk I2C3_GATE>;
+ clock-frequency = <100000>;
+ resets = <&sys MA35D1_RESET_I2C3>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c4: i2c@40840000 {
+ compatible = "nuvoton,ma35d1-i2c";
+ reg = <0x0 0x40840000 0x0 0x1000>;
+ interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk I2C4_GATE>;
+ clock-frequency = <100000>;
+ resets = <&sys MA35D1_RESET_I2C4>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c5: i2c@40850000 {
+ compatible = "nuvoton,ma35d1-i2c";
+ reg = <0x0 0x40850000 0x0 0x1000>;
+ interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk I2C5_GATE>;
+ clock-frequency = <100000>;
+ resets = <&sys MA35D1_RESET_I2C5>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
uart16: serial@40880000 {
compatible = "nuvoton,ma35d1-uart";
reg = <0x0 0x40880000 0x0 0x100>;
--
2.34.1
prev parent reply other threads:[~2026-06-10 3:04 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-10 3:02 [PATCH v4 0/3] i2c: ma35d1: Add support for MA35D1 I2C controller Zi-Yu Chen
2026-06-10 3:02 ` [PATCH v4 1/3] dt-bindings: i2c: nuvoton,ma35d1-i2c: Add " Zi-Yu Chen
2026-06-10 3:02 ` [PATCH v4 2/3] i2c: ma35d1: Add Nuvoton MA35D1 I2C driver support Zi-Yu Chen
2026-06-10 3:02 ` Zi-Yu Chen [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260610030208.2020275-4-zychennvt@gmail.com \
--to=zychennvt@gmail.com \
--cc=andi.shyti@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=p.zabel@pengutronix.de \
--cc=robh@kernel.org \
--cc=schung@nuvoton.com \
--cc=ychuang3@nuvoton.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox