[PATCH] rtc: meson: fix refcount leak in meson_rtc_get_bus

[WenTao Liang <vulab@iscas.ac.cn>]

In meson_rtc_get_bus(), reset_control_reset() is called to trigger
a hardware reset when the serial bus is not ready. The function may
retry up to three times, but neither the successful nor the failure
path calls reset_control_rearm() to balance the reference count,
leaking the triggered_count on shared reset controls.

Fix this by adding reset_control_rearm() after reset_control_reset()
on both the error return path and the success path within the retry
loop, ensuring the reset control can be re-triggered on subsequent
bus acquisition attempts.

Cc: stable@vger.kernel.org
Fixes: d8fe6009aa3e ("rtc: support for the Amlogic Meson RTC")
Signed-off-by: WenTao Liang <vulab@iscas.ac.cn>
---
 drivers/rtc/rtc-meson.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/rtc/rtc-meson.c b/drivers/rtc/rtc-meson.c
index 21eceb9e2e13..729384dceb12 100644
--- a/drivers/rtc/rtc-meson.c
+++ b/drivers/rtc/rtc-meson.c
@@ -146,8 +146,12 @@ static int meson_rtc_get_bus(struct meson_rtc *rtc)
 		dev_warn(rtc->dev, "failed to get bus, resetting RTC\n");
 
 		ret = reset_control_reset(rtc->reset);
-		if (ret)
+		if (ret) {
+			reset_control_rearm(rtc->reset);
 			return ret;
+		}
+
+		reset_control_rearm(rtc->reset);
 	}
 
 	dev_err(rtc->dev, "bus is not ready\n");
-- 
2.50.1 (Apple Git-155)