From: Xianwei Zhao via B4 Relay <devnull+xianwei.zhao.amlogic.com@kernel.org>
To: Neil Armstrong <neil.armstrong@linaro.org>,
Kevin Hilman <khilman@baylibre.com>,
Jerome Brunet <jbrunet@baylibre.com>,
Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org,
linux-amlogic@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Xianwei Zhao <xianwei.zhao@amlogic.com>
Subject: [PATCH] arm64: dts: amlogic: add some device nodes for A9
Date: Mon, 29 Jun 2026 06:41:51 +0000 [thread overview]
Message-ID: <20260629-a9-node-v1-1-42ff6a0c16ab@amlogic.com> (raw)
From: Xianwei Zhao <xianwei.zhao@amlogic.com>
Add pinctrl and irqchip-gpio device nodes for A9 SoC.
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
---
Add pinctrl and irqchip-gpio device node for A9.
---
arch/arm64/boot/dts/amlogic/amlogic-a9.dtsi | 140 ++++++++++++++++++++++++++++
1 file changed, 140 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-a9.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-a9.dtsi
index 660c8556a864..cdc57b685cc3 100644
--- a/arch/arm64/boot/dts/amlogic/amlogic-a9.dtsi
+++ b/arch/arm64/boot/dts/amlogic/amlogic-a9.dtsi
@@ -6,6 +6,7 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/amlogic,pinctrl.h>
/ {
interrupt-parent = <&gic>;
@@ -97,6 +98,95 @@ soc {
#size-cells = <2>;
ranges;
+ apb: bus@fe000000 {
+ compatible = "simple-bus";
+ reg = <0x0 0xfe000000 0x0 0x480000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
+
+ periphs_pinctrl: pinctrl@4000 {
+ compatible = "amlogic,pinctrl-a9";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0x4000 0x0 0x340>;
+
+ gpioz: gpio@c0 {
+ reg = <0 0xc0 0 0x20>, <0 0x18 0 0x8>;
+ reg-names = "gpio", "mux";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_Z<<8) 16>;
+ };
+
+ gpiox: gpio@100 {
+ reg = <0 0x100 0 0x24>, <0 0xc 0 0x8>;
+ reg-names = "gpio", "mux";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_X<<8) 18>;
+ };
+
+ gpioh: gpio@140 {
+ reg = <0 0x140 0 0x20>, <0 0x2c 0 0x4>;
+ reg-names = "gpio", "mux";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_H<<8) 8>;
+ };
+
+ gpiom: gpio@1a0 {
+ reg = <0 0x1a0 0 0x20>, <0 0x20 0 0x4>;
+ reg-names = "gpio", "mux";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_M<<8) 8>;
+ };
+
+ gpiob: gpio@240 {
+ reg = <0 0x240 0 0x20>, <0 0x0 0 0x8>;
+ reg-names = "gpio", "mux";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_B<<8) 14>;
+ };
+
+ gpioa: gpio@280 {
+ reg = <0 0x280 0 0x24>, <0 0x40 0 0xc>;
+ reg-names = "gpio", "mux";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_A<<8) 20>;
+ };
+
+ gpioy: gpio@2c0 {
+ reg = <0 0x2c0 0 0x20>, <0 0x30 0 0x8>;
+ reg-names = "gpio", "mux";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_Y<<8) 10>;
+ };
+
+ gpiocc: gpio@300 {
+ reg = <0 0x300 0 0x20>, <0 0x14 0 0x4>;
+ reg-names = "gpio", "mux";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_CC<<8) 2>;
+ };
+ };
+
+ gpio_intc: interrupt-controller@4080 {
+ compatible = "amlogic,a9-gpio-intc",
+ "amlogic,meson-gpio-intc";
+ reg = <0x0 0x4080 0x0 0x20>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ amlogic,channel-interrupts =
+ <10 11 12 13 14 15 16 17 18 19 20 21>;
+ };
+ };
+
gic: interrupt-controller@ff800000 {
compatible = "arm,gic-v3";
#interrupt-cells = <3>;
@@ -123,6 +213,56 @@ uart_b: serial@1e000 {
clock-names = "xtal", "pclk", "baud";
status = "disabled";
};
+
+ aobus_pinctrl: pinctrl@4000 {
+ compatible = "amlogic,pinctrl-a9";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0x4000 0x0 0x0e0>;
+
+ gpioao: gpio@1c {
+ reg = <0 0x1c 0 0x20>, <0 0x0 0 0x8>;
+ reg-names = "gpio", "mux";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&aobus_pinctrl 0 (AMLOGIC_GPIO_AO<<8) 13>;
+ };
+
+ gpioc: gpio@3c {
+ reg = <0 0x3c 0 0x20>, <0 0x10 0 0x4>;
+ reg-names = "gpio", "mux";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&aobus_pinctrl 0 (AMLOGIC_GPIO_C<<8) 7>;
+ };
+
+ gpiod: gpio@5c {
+ reg = <0 0x5c 0 0x24>, <0 0x8 0 0x8>;
+ reg-names = "gpio", "mux";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&aobus_pinctrl 0 (AMLOGIC_GPIO_D<<8) 18>;
+ };
+
+ test_n: gpio@c0 {
+ reg = <0 0xc0 0 0x20>;
+ reg-names = "gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&aobus_pinctrl 0 (AMLOGIC_GPIO_TEST_N<<8) 1>;
+ };
+ };
+
+ gpio_ao_intc: interrupt-controller@4080 {
+ compatible = "amlogic,a9-gpio-ao-intc",
+ "amlogic,meson-gpio-intc";
+ reg = <0x0 0x4080 0x0 0x34>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ amlogic,channel-interrupts =
+ <384 385 386 387 388 389 390 391 392 393
+ 394 395 396 397 398 399 400 401 402 403>;
+ };
};
};
};
---
base-commit: 3d5670d672ae08b8c534b7beed6f57c8b44e7b43
change-id: 20260629-a9-node-3e6fceba7c90
Best regards,
--
Xianwei Zhao <xianwei.zhao@amlogic.com>
reply other threads:[~2026-06-29 6:42 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260629-a9-node-v1-1-42ff6a0c16ab@amlogic.com \
--to=devnull+xianwei.zhao.amlogic.com@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jbrunet@baylibre.com \
--cc=khilman@baylibre.com \
--cc=krzk+dt@kernel.org \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=martin.blumenstingl@googlemail.com \
--cc=neil.armstrong@linaro.org \
--cc=robh@kernel.org \
--cc=xianwei.zhao@amlogic.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox