Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Liem <liem16213@gmail.com>
To: carlos.song@oss.nxp.com
Cc: andi.shyti@kernel.org, biwen.li@nxp.com, festevam@gmail.com,
	frank.li@nxp.com, frank.li@oss.nxp.com, imx@lists.linux.dev,
	kernel@pengutronix.de, liem16213@gmail.com,
	linux-arm-kernel@lists.infradead.org, linux-i2c@vger.kernel.org,
	linux-kernel@vger.kernel.org, o.rempel@pengutronix.de,
	s.hauer@pengutronix.de, stable@vger.kernel.org, wsa@kernel.org
Subject: [PATCH v4 1/2] i2c: imx: Fix slave registration race and error handling
Date: Mon, 29 Jun 2026 10:38:28 +0800	[thread overview]
Message-ID: <20260629023829.152651-2-liem16213@gmail.com> (raw)
In-Reply-To: <20260629023829.152651-1-liem16213@gmail.com>

In i2c_imx_reg_slave(), the slave pointer was assigned before
pm_runtime_resume_and_get().  If pm_runtime_resume_and_get() failed,
the error path returned without clearing i2c_imx->slave, leaving it
non-NULL and causing all subsequent registration attempts to fail
with -EBUSY.

Additionally, because this driver uses a shared IRQ, the interrupt
handler i2c_imx_isr() can execute concurrently and, after acquiring
slave_lock, dereference i2c_imx->slave.  The previous fix attempt
added a lockless i2c_imx->slave = NULL on the error path, but that
could race with the ISR under the lock and still cause a NULL pointer
dereference.

Fix both issues by deferring the assignment of i2c_imx->slave and
i2c_imx->last_slave_event to after a successful resume, and by
performing the assignment inside the slave_lock critical section.
This guarantees that the slave pointer is never left stale on the
error path and is always valid when observed by the interrupt handler.

Fixes: f7414cd6923f ("i2c: imx: support slave mode for imx I2C driver")
Cc: stable@vger.kernel.org
Signed-off-by: Liem <liem16213@gmail.com>
---
v3 -> v4:
  - Instead of clearing the slave pointer on error, defer the
    assignment until after pm_runtime_resume_and_get() succeeds,
    and take slave_lock to avoid racing with the shared IRQ handler.
    Suggested by Sashiko and Carlos Song
---
 drivers/i2c/busses/i2c-imx.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index 28313d0fad37..2398c406e913 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -930,9 +930,6 @@ static int i2c_imx_reg_slave(struct i2c_client *client)
 	if (i2c_imx->slave)
 		return -EBUSY;
 
-	i2c_imx->slave = client;
-	i2c_imx->last_slave_event = I2C_SLAVE_STOP;
-
 	/* Resume */
 	ret = pm_runtime_resume_and_get(i2c_imx->adapter.dev.parent);
 	if (ret < 0) {
@@ -940,6 +937,11 @@ static int i2c_imx_reg_slave(struct i2c_client *client)
 		return ret;
 	}
 
+	scoped_guard(spinlock_irqsave, &i2c_imx->slave_lock) {
+		i2c_imx->slave = client;
+		i2c_imx->last_slave_event = I2C_SLAVE_STOP;
+	}
+
 	i2c_imx_slave_init(i2c_imx);
 
 	return 0;
-- 
2.34.1



  reply	other threads:[~2026-06-29  2:38 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-06-25  7:11 [PATCH] i2c: imx: Fix slave registration error path and missing NULL check Liem
2026-06-25 11:17 ` Carlos Song (OSS)
2026-06-25 16:02 ` [PATCH v2] i2c: imx: Fix slave registration error path and missing timer cleanup Liem
2026-06-25 16:16   ` Frank Li
2026-06-26  1:55     ` liem
2026-06-26  2:58     ` [PATCH v3 0/2] Fix slave mode corner issues Liem
2026-06-26  2:58       ` [PATCH v3 1/2] i2c: imx: Clear slave pointer on registration error Liem
2026-06-26  6:23         ` Carlos Song (OSS)
2026-06-26  8:30           ` liem
2026-06-29  2:38           ` [PATCH v4 0/2] i2c: imx: Fix slave mode corner issues Liem
2026-06-29  2:38             ` Liem [this message]
2026-06-29  9:30               ` [PATCH v4 1/2] i2c: imx: Fix slave registration race and error handling Carlos Song
2026-06-29 14:13               ` Frank Li
2026-06-29  2:38             ` [PATCH v4 2/2] i2c: imx: Cancel hrtimer before clearing slave pointer Liem
2026-06-29 14:14               ` Frank Li
2026-06-26  2:58       ` [PATCH v3 " Liem
2026-06-26  6:26         ` Carlos Song (OSS)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260629023829.152651-2-liem16213@gmail.com \
    --to=liem16213@gmail.com \
    --cc=andi.shyti@kernel.org \
    --cc=biwen.li@nxp.com \
    --cc=carlos.song@oss.nxp.com \
    --cc=festevam@gmail.com \
    --cc=frank.li@nxp.com \
    --cc=frank.li@oss.nxp.com \
    --cc=imx@lists.linux.dev \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-i2c@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=o.rempel@pengutronix.de \
    --cc=s.hauer@pengutronix.de \
    --cc=stable@vger.kernel.org \
    --cc=wsa@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox