From: Manikandan Muralidharan <manikandan.m@microchip.com>
To: <pratyush@kernel.org>, <mwalle@kernel.org>,
<takahiro.kuwano@infineon.com>, <miquel.raynal@bootlin.com>,
<richard@nod.at>, <vigneshr@ti.com>, <robh@kernel.org>,
<krzk+dt@kernel.org>, <conor+dt@kernel.org>, <srini@kernel.org>,
<nicolas.ferre@microchip.com>, <alexandre.belloni@bootlin.com>,
<claudiu.beznea@tuxon.dev>, <linux@armlinux.org.uk>,
<richardcochran@gmail.com>, <linusw@kernel.org>, <arnd@arndb.de>,
<michael@walle.cc>, <linux-mtd@lists.infradead.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>, <netdev@vger.kernel.org>
Cc: Manikandan Muralidharan <manikandan.m@microchip.com>
Subject: [PATCH v4 2/7] dt-bindings: nvmem: layouts: add Microchip/SST SFDP EUI layout
Date: Tue, 30 Jun 2026 14:54:01 +0530 [thread overview]
Message-ID: <20260630092406.150587-3-manikandan.m@microchip.com> (raw)
In-Reply-To: <20260630092406.150587-1-manikandan.m@microchip.com>
Add a binding for the NVMEM layout that exposes the factory-programmed
EUI-48 identifier from the Microchip/SST vendor-specific SFDP parameter
table (e.g. SST26VF064BEUI) as a "mac-address" NVMEM cell, and reference
it from nvmem-layout.yaml.
Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
---
.../layouts/microchip,sst26vf-sfdp-eui.yaml | 60 +++++++++++++++++++
.../bindings/nvmem/layouts/nvmem-layout.yaml | 1 +
2 files changed, 61 insertions(+)
create mode 100644 Documentation/devicetree/bindings/nvmem/layouts/microchip,sst26vf-sfdp-eui.yaml
diff --git a/Documentation/devicetree/bindings/nvmem/layouts/microchip,sst26vf-sfdp-eui.yaml b/Documentation/devicetree/bindings/nvmem/layouts/microchip,sst26vf-sfdp-eui.yaml
new file mode 100644
index 000000000000..37357efb7840
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/layouts/microchip,sst26vf-sfdp-eui.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/layouts/microchip,sst26vf-sfdp-eui.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVMEM layout of the Microchip/SST SFDP EUI-48 identifier
+
+maintainers:
+ - Manikandan Muralidharan <manikandan.m@microchip.com>
+
+description:
+ Some Microchip/SST serial flashes (for example the SST26VF064BEUI) are
+ factory programmed with a globally unique EUI-48 identifier stored in a
+ vendor-specific SFDP parameter table and permanently write-protected. This
+ layout locates that table and exposes the EUI-48 as an NVMEM cell so that,
+ for example, a network driver can use it as a MAC address. The location of
+ the data is discovered at runtime from the SFDP; no offset is encoded in the
+ device tree.
+
+select: false
+
+properties:
+ compatible:
+ const: microchip,sst26vf-sfdp-eui
+
+ mac-address:
+ type: object
+ description:
+ The factory-programmed EUI-48 identifier, usable as a MAC address.
+ additionalProperties: false
+
+required:
+ - compatible
+
+additionalProperties: false
+
+examples:
+ - |
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+
+ sfdp {
+ compatible = "jedec,sfdp";
+
+ nvmem-layout {
+ compatible = "microchip,sst26vf-sfdp-eui";
+
+ mac-address {
+ };
+ };
+ };
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/nvmem/layouts/nvmem-layout.yaml b/Documentation/devicetree/bindings/nvmem/layouts/nvmem-layout.yaml
index 382507060651..e63b93083821 100644
--- a/Documentation/devicetree/bindings/nvmem/layouts/nvmem-layout.yaml
+++ b/Documentation/devicetree/bindings/nvmem/layouts/nvmem-layout.yaml
@@ -20,6 +20,7 @@ description: |
oneOf:
- $ref: fixed-layout.yaml
- $ref: kontron,sl28-vpd.yaml
+ - $ref: microchip,sst26vf-sfdp-eui.yaml
- $ref: onie,tlv-layout.yaml
- $ref: u-boot,env.yaml
--
2.43.0
next prev parent reply other threads:[~2026-06-30 9:25 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-30 9:23 [PATCH v4 0/7] Read MAC address from SST vendor specific SFDP region Manikandan Muralidharan
2026-06-30 9:24 ` [PATCH v4 1/7] dt-bindings: mtd: jedec,spi-nor: allow the SFDP to be exposed via NVMEM Manikandan Muralidharan
2026-06-30 22:12 ` Linus Walleij
2026-07-01 8:34 ` Michael Walle
2026-07-01 10:53 ` Linus Walleij
2026-06-30 9:24 ` Manikandan Muralidharan [this message]
2026-06-30 9:24 ` [PATCH v4 3/7] mtd: spi-nor: sfdp: expose the SFDP as a read-only NVMEM device Manikandan Muralidharan
2026-06-30 22:25 ` Linus Walleij
2026-06-30 9:24 ` [PATCH v4 4/7] nvmem: layouts: add Microchip/SST SFDP EUI layout driver Manikandan Muralidharan
2026-06-30 9:24 ` [PATCH v4 5/7] ARM: dts: microchip: sama5d27_wlsom1: use fixed-partitions for QSPI flash Manikandan Muralidharan
2026-06-30 22:27 ` Linus Walleij
2026-06-30 9:24 ` [PATCH v4 6/7] ARM: dts: microchip: sama5d27_wlsom1: read MAC address from QSPI SFDP Manikandan Muralidharan
2026-06-30 9:24 ` [PATCH v4 7/7] ARM: configs: sama5: enable Microchip/SST SFDP EUI NVMEM layout Manikandan Muralidharan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260630092406.150587-3-manikandan.m@microchip.com \
--to=manikandan.m@microchip.com \
--cc=alexandre.belloni@bootlin.com \
--cc=arnd@arndb.de \
--cc=claudiu.beznea@tuxon.dev \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linusw@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=linux@armlinux.org.uk \
--cc=michael@walle.cc \
--cc=miquel.raynal@bootlin.com \
--cc=mwalle@kernel.org \
--cc=netdev@vger.kernel.org \
--cc=nicolas.ferre@microchip.com \
--cc=pratyush@kernel.org \
--cc=richard@nod.at \
--cc=richardcochran@gmail.com \
--cc=robh@kernel.org \
--cc=srini@kernel.org \
--cc=takahiro.kuwano@infineon.com \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox