From: Varshini Rajendran <varshini.rajendran@microchip.com>
To: <ehristev@kernel.org>, <jic23@kernel.org>,
<dlechner@baylibre.com>, <nuno.sa@analog.com>, <andy@kernel.org>,
<robh@kernel.org>, <krzk+dt@kernel.org>, <conor+dt@kernel.org>,
<nicolas.ferre@microchip.com>, <alexandre.belloni@bootlin.com>,
<claudiu.beznea@tuxon.dev>, <srini@kernel.org>,
<marcelo.schmitt@analog.com>, <jorge.marques@analog.com>,
<mazziesaccount@gmail.com>, <Jonathan.Santos@analog.com>,
<jishnu.prakash@oss.qualcomm.com>, <antoniu.miclaus@analog.com>,
<duje@dujemihanovic.xyz>, <varshini.rajendran@microchip.com>,
<linux-iio@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>
Subject: [PATCH v3 00/13] Add thermal management support for sama7d65
Date: Tue, 30 Jun 2026 15:05:50 +0530 [thread overview]
Message-ID: <20260630093603.38663-1-varshini.rajendran@microchip.com> (raw)
The thermal management system of sama7d65 includes:
- Temperature sensor as a part of ADC channel
- Temperature calibration data retrieved from the OTP memory for
improved accuracy of the readings
- DVFS implementation
- Thermal system with DVFS as cooling cell.
This patch series adds support for the following:
- Tag-based packet lookup for the NVMEM OTPC driver while preserving
backward compatibility with existing ID-based access
- Temperature calibration layout handling in the ADC driver to support
different SoC-specific calibration data formats
- ADC driver adaptation for sama7d65
- DT nodes for OTP, ADC, temperature sensor, and thermal zones for
sama7d65
Changes in v3:
- Updated the commit message with reasoning for a new compatible
without a fallback (sama7d65-adc)
- Split patch 2/12 into two patches: a patch with cleanup.h changes only
and the rework patch
- Added comment explaining the TAG ACST
- Fixed the holes identified in the at91_adc_platform struct by
pahole tool
- Dropped labels in the dt document example
- Added temp variable in mchp_otpc_resolve_packet() to avoid % and /
operations in the same instruction (avoiding compiler optimization)
- Added the SoC details in the ADC driver Kconfig help section
- Maintained reverse xmas ordering in declarations
- Fixed node ordering (alphabetically) in the board dts file
Link to v2: https://lore.kernel.org/lkml/20260623105944.128840-1-varshini.rajendran@microchip.com/
Changes in v2:
- Preserved backward compatibility with ID-based packet lookup to
avoid breaking existing users
- Removed sama7g5 DTS changes (not needed with backward compatible
driver - will be sent later to update to the new access method)
- Preserved the packet data structure returned not to break the
consumers
- Reworked ADC driver to use a calibration layout structure instead of
hardcoded indexes, for scalability
- Fixed kernel-doc Return section
- Removed stray blank line in mchp_otpc_read()
- Removed unnecessary UL suffix in writel_relaxed()
- Dropped unused packet types
- Fixed stray spaces before exclamation marks in error messages
- Added ASCII representation to TAG macro definition
- Removed odd MAX enum with trailing comma and refactored
- Moved DTS patches to the end of series
- Used cleanup.h helpers for NVMEM data buffer handling in ADC driver
- Combined multiple v1 patches into logical units
- Used correct subject prefixes for dt-bindings patches
- Used fixed-layout NVMEM syntax for sama7d65 DTS and binding
instead of deprecated syntax
- Added cpu-supply linkage for proper DVFS voltage scaling
- Updated stale stride=4 comment in dt-bindings header
Link to v1: https://lore.kernel.org/linux-arm-kernel/20250804100219.63325-1-varshini.rajendran@microchip.com/
Varshini Rajendran (13):
dt-bindings: iio: adc: at91-sama5d2: document sama7d65
iio: adc: at91-sama5d2_adc: use cleanup.h for NVMEM buffer
iio: adc: at91-sama5d2_adc: rework temp calibration layout handling
iio: adc: at91-sama5d2_adc: adapt the driver for sama7d65
dt-bindings: nvmem: microchip,sama7g5-otpc: add sama7d65 and dt node
example
nvmem: microchip-otpc: add tag-based packet lookup
ARM: dts: microchip: sama7d65: add cpu opps
ARM: dts: microchip: sama7d65: Add ADC node
ARM: dts: microchip: sama7d65_curiosity: Enable ADC, DVFS
ARM: dts: microchip: sama7d65: add otpc node
ARM: dts: microchip: sama7d65: add cells for temperature calibration
ARM: dts: microchip: sama7d65: add temperature sensor
ARM: dts: microchip: sama7d65: add thermal zones node
.../bindings/iio/adc/atmel,sama5d2-adc.yaml | 1 +
.../nvmem/microchip,sama7g5-otpc.yaml | 28 +++-
.../dts/microchip/at91-sama7d65_curiosity.dts | 27 ++++
arch/arm/boot/dts/microchip/sama7d65.dtsi | 132 ++++++++++++++++
drivers/iio/adc/Kconfig | 2 +-
drivers/iio/adc/at91-sama5d2_adc.c | 119 +++++++++++----
drivers/nvmem/microchip-otpc.c | 143 ++++++++++++++++--
.../nvmem/microchip,sama7g5-otpc.h | 4 +-
8 files changed, 413 insertions(+), 43 deletions(-)
--
2.34.1
next reply other threads:[~2026-06-30 9:36 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-30 9:35 Varshini Rajendran [this message]
2026-06-30 9:35 ` [PATCH v3 01/13] dt-bindings: iio: adc: at91-sama5d2: document sama7d65 Varshini Rajendran
2026-06-30 9:35 ` [PATCH v3 02/13] iio: adc: at91-sama5d2_adc: use cleanup.h for NVMEM buffer Varshini Rajendran
2026-06-30 12:12 ` Andy Shevchenko
2026-06-30 23:36 ` Jonathan Cameron
2026-06-30 9:35 ` [PATCH v3 03/13] iio: adc: at91-sama5d2_adc: rework temp calibration layout handling Varshini Rajendran
2026-06-30 12:16 ` Andy Shevchenko
2026-06-30 23:38 ` Jonathan Cameron
2026-06-30 9:35 ` [PATCH v3 04/13] iio: adc: at91-sama5d2_adc: adapt the driver for sama7d65 Varshini Rajendran
2026-06-30 12:18 ` Andy Shevchenko
2026-06-30 23:43 ` Jonathan Cameron
2026-06-30 9:35 ` [PATCH v3 05/13] dt-bindings: nvmem: microchip,sama7g5-otpc: add sama7d65 and dt node example Varshini Rajendran
2026-06-30 9:35 ` [PATCH v3 06/13] nvmem: microchip-otpc: add tag-based packet lookup Varshini Rajendran
2026-06-30 12:23 ` Andy Shevchenko
2026-06-30 12:26 ` Andy Shevchenko
2026-06-30 23:49 ` Jonathan Cameron
2026-06-30 9:35 ` [PATCH v3 07/13] ARM: dts: microchip: sama7d65: add cpu opps Varshini Rajendran
2026-06-30 9:35 ` [PATCH v3 08/13] ARM: dts: microchip: sama7d65: Add ADC node Varshini Rajendran
2026-06-30 9:35 ` [PATCH v3 09/13] ARM: dts: microchip: sama7d65_curiosity: Enable ADC, DVFS Varshini Rajendran
2026-06-30 9:36 ` [PATCH v3 10/13] ARM: dts: microchip: sama7d65: add otpc node Varshini Rajendran
2026-06-30 9:36 ` [PATCH v3 11/13] ARM: dts: microchip: sama7d65: add cells for temperature calibration Varshini Rajendran
2026-06-30 9:36 ` [PATCH v3 12/13] ARM: dts: microchip: sama7d65: add temperature sensor Varshini Rajendran
2026-06-30 9:36 ` [PATCH v3 13/13] ARM: dts: microchip: sama7d65: add thermal zones node Varshini Rajendran
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260630093603.38663-1-varshini.rajendran@microchip.com \
--to=varshini.rajendran@microchip.com \
--cc=Jonathan.Santos@analog.com \
--cc=alexandre.belloni@bootlin.com \
--cc=andy@kernel.org \
--cc=antoniu.miclaus@analog.com \
--cc=claudiu.beznea@tuxon.dev \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dlechner@baylibre.com \
--cc=duje@dujemihanovic.xyz \
--cc=ehristev@kernel.org \
--cc=jic23@kernel.org \
--cc=jishnu.prakash@oss.qualcomm.com \
--cc=jorge.marques@analog.com \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marcelo.schmitt@analog.com \
--cc=mazziesaccount@gmail.com \
--cc=nicolas.ferre@microchip.com \
--cc=nuno.sa@analog.com \
--cc=robh@kernel.org \
--cc=srini@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox