From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 43F0BC43458 for ; Tue, 30 Jun 2026 17:32:18 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender:List-Subscribe:List-Help :List-Post:List-Archive:List-Unsubscribe:List-Id:Content-Type: Content-Transfer-Encoding:MIME-Version:References:In-Reply-To:Message-ID:Date :Subject:CC:To:From:Reply-To:Content-ID:Content-Description:Resent-Date: Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:List-Owner; bh=e7EFxYvkcVbI5UHccuWe6AFEfL+Sn1dXJTRripKZl7Q=; b=IUgSDZ7IOyEP8jw2VWCzvnqP+S 5lc835JneLvV1tvDRbdAZ/dFg2wLMHGoE9RUWU31zvLlZJ1xuLj8uxgqGYWHezxRoYIVgFvWOkTFE eAhcurDM/0SFcKzVg0UJ18iMC2y8h9y5fKO0HrvRbLrIpLxzSgU50vxCWYb6ZkxLPIUGwTqXFfTls sMI9gQDY/Lgyjrnv5ewstC9i2cGtN10vxJKOB5Cw2No5Jl2gp/nyZLXrS2cCrZrIUmchEKdPo4JhS x1UiLYFROUm9rwDpAyJ9m/56miWX/cHTQ3SLGsdjF0uq9Pvuszh7AGECIwLXRqMsWNW47+g14n43b jNIWDJ3g==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.99.1 #2 (Red Hat Linux)) id 1wecJe-0000000HZhW-2I0W; Tue, 30 Jun 2026 17:32:10 +0000 Received: from mail-francesouthazon11021123.outbound.protection.outlook.com ([40.107.130.123] helo=MRWPR03CU001.outbound.protection.outlook.com) by bombadil.infradead.org with esmtps (Exim 4.99.1 #2 (Red Hat Linux)) id 1wecJX-0000000HZeW-11Dd for linux-arm-kernel@lists.infradead.org; Tue, 30 Jun 2026 17:32:05 +0000 ARC-Seal: i=1; a=rsa-sha256; s=arcselector10001; d=microsoft.com; cv=none; b=LWZJb582/cBcHTKU1eBkRPScH7BEV6oDAC5lMrhwRg2hML+vJflfD6jzhHVtqzR+dbLgF50ENdp0o8rEeK40dhUTQ+Dd3TuU7kwCe7+nZ0/3KLZbZXCr4sO5YI1qXbRavXNv/A+cMM1teB2s2ipxhbz8UxlSzqNvVr51ttzgrlkJCLEaFFpcLyPNM+MtifTONkDBbHjVIx2MUfs3bVANO85PQwACEtmUcbBi2410aL/3A5Fn2927lep7BoZd3bPspTzDG/LMf2bVJKv18Hmz5DKZBM+SbIayVlElmjh1sPe35sT0fQj9Y8GR1voWApWYRLhCj8lw6hmef7Bi58f4+Q== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=microsoft.com; s=arcselector10001; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-AntiSpam-MessageData-ChunkCount:X-MS-Exchange-AntiSpam-MessageData-0:X-MS-Exchange-AntiSpam-MessageData-1; bh=e7EFxYvkcVbI5UHccuWe6AFEfL+Sn1dXJTRripKZl7Q=; b=y+mFHUc56TZ6op9C5/TBzcohg31NBbTfEwQm57RcnkpkCl+c/MyEhd6hbdroWjAmaVQwHMAaMr+A9IXZJlRwSjNofsFsh7aJR2vIewMeBDshGx97zMMTogipVzEA0akzUO37hqfUM6jB2v7FOPUGBSvP+VNtYVEBsUeCg9OJdkC1NjXskbfDFV/L7jKvClu37OdXt/SkVtiy3G9+PX785Du2bgUrShfowZwKJQHOfXY3Z2NWl7/Zh1nHHD+Ka9McaPkdXmi0UXs/W449ClHpsiMzovzQzS2KKk64UgfwuMPelHvZ1SXWRm4Bz0OanO3cTpTSZt+8RNAy+rFg/nAmPg== ARC-Authentication-Results: i=1; mx.microsoft.com 1; spf=softfail (sender ip is 91.26.50.189) smtp.rcpttodomain=ti.com smtp.mailfrom=phytec.com; dmarc=fail (p=none sp=none pct=100) action=none header.from=phytec.com; dkim=none (message not signed); arc=none (0) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=phytec.com; s=selector1; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-SenderADCheck; bh=e7EFxYvkcVbI5UHccuWe6AFEfL+Sn1dXJTRripKZl7Q=; b=H9EKejt9I/xda7VVZCO10iyV/1StFQg4fWMuIn342Xb7qPUMmlKz4A97iVIWX0N5IHp/hYFmF62n1iPHuBYf4WL0fFK65ih8pZ6/ELbljkPSGoPtHzZSkN+DNWEKIx12/fA5xveZjxEOOz69iLomDhOfrUN+tpO5blLyUXIb67+XOQxxA6cHg6maSuOTJZVhrXfM1cXxbKasfshT9bQTj7VrNFPqdzLIsJwDNANiYGrrQwNzZAUEp/GVeqD9a6oYdxw1h1lkUbVIDNQancf2G/EVGq9WOKRBUnsNTokr6sgqJLoIop2A7Rx5ovV37J3QiBWE9kXu4EX46/uw1wa2FA== Received: from PA7P264CA0066.FRAP264.PROD.OUTLOOK.COM (2603:10a6:102:2de::11) by GV2P195MB1966.EURP195.PROD.OUTLOOK.COM (2603:10a6:150:7e::11) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.21.159.19; Tue, 30 Jun 2026 17:31:53 +0000 Received: from AM4PEPF00025F96.EURPRD83.prod.outlook.com (2603:10a6:102:2de:cafe::33) by PA7P264CA0066.outlook.office365.com (2603:10a6:102:2de::11) with Microsoft SMTP Server (version=TLS1_3, cipher=TLS_AES_256_GCM_SHA384) id 15.21.159.19 via Frontend Transport; Tue, 30 Jun 2026 17:31:53 +0000 X-MS-Exchange-Authentication-Results: spf=softfail (sender IP is 91.26.50.189) smtp.mailfrom=phytec.com; dkim=none (message not signed) header.d=none;dmarc=fail action=none header.from=phytec.com; Received-SPF: SoftFail (protection.outlook.com: domain of transitioning phytec.com discourages use of 91.26.50.189 as permitted sender) Received: from Postix.phytec.de (91.26.50.189) by AM4PEPF00025F96.mail.protection.outlook.com (10.167.16.5) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.21.202.0 via Frontend Transport; Tue, 30 Jun 2026 17:31:52 +0000 Received: from phytec.com (172.25.39.17) by Postix.phytec.de (172.25.0.11) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.2562.43; Tue, 30 Jun 2026 19:31:48 +0200 From: Nathan Morrisson To: , , , , , CC: , , , , , , Subject: [PATCH v4 2/2] arm64: dts: ti: Add support for the phyCORE-AM67x Date: Tue, 30 Jun 2026 10:31:31 -0700 Message-ID: <20260630173131.3000303-2-nmorrisson@phytec.com> X-Mailer: git-send-email 2.43.0 In-Reply-To: <20260630173131.3000303-1-nmorrisson@phytec.com> References: <20260630173131.3000303-1-nmorrisson@phytec.com> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Content-Type: text/plain X-Originating-IP: [172.25.39.17] X-ClientProxiedBy: Postix.phytec.de (172.25.0.11) To Postix.phytec.de (172.25.0.11) X-EOPAttributedMessage: 0 X-MS-PublicTrafficType: Email X-MS-TrafficTypeDiagnostic: AM4PEPF00025F96:EE_|GV2P195MB1966:EE_ X-MS-Office365-Filtering-Correlation-Id: 267ec491-a381-4e36-ffa4-08ded6cd794e X-MS-Exchange-SenderADCheck: 1 X-MS-Exchange-AntiSpam-Relay: 0 X-Microsoft-Antispam: BCL:0;ARA:13230040|376014|1800799024|82310400026|7416014|36860700016|23010399003|3023799007|6133799003|22082099003|11063799006|18002099003|56012099006|13003099007; X-Microsoft-Antispam-Message-Info: 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 X-Forefront-Antispam-Report: CIP:91.26.50.189;CTRY:DE;LANG:en;SCL:1;SRV:;IPV:CAL;SFV:NSPM;H:Postix.phytec.de;PTR:InfoDomainNonexistent;CAT:NONE;SFS:(13230040)(376014)(1800799024)(82310400026)(7416014)(36860700016)(23010399003)(3023799007)(6133799003)(22082099003)(11063799006)(18002099003)(56012099006)(13003099007);DIR:OUT;SFP:1102; X-MS-Exchange-AntiSpam-MessageData-ChunkCount: 1 X-MS-Exchange-AntiSpam-MessageData-0: g/GPVJQ0FcDHeu+81dDn2AwAm3/95tUvF4f+ZbmWRkJMYlTF+oBhlEe0aWNh1pGBenf4s2cRx1o8O4IsZrbyahDNyHDWGCy8JySCyDEPiRliktYo5cUpup+W9cmmoPiEfxFl4bXEiFmM0no7g6ZZKsVURuwzUVpFYWhOw3+tuon4Oe1DKjIpVqJHUM6NUwjDdAgkrevLNqxTtSHoYgie53ndjt5t+fqYAV5ufFYsNgAJQdwyDQzDlSLtDRMGJ7sYAqIb63MOmibjESRNWADuoAgSjqJ/mTRD38MlevRaWVGiKeSBg6LpmIEctYE41gkauUM7jLaO6ErNr/WZRpLoE6SeSeeamCP0YS51q1zs+IoxumpvJx4GiJHsiCk6QJ0Pw8+diibocB5yDzptzDzXaAZMo0UX5vpbJ+pKq3fYhXOiDQ/3kWiqoU0Zg5iNxaN7 X-OriginatorOrg: phytec.com X-MS-Exchange-CrossTenant-OriginalArrivalTime: 30 Jun 2026 17:31:52.4617 (UTC) X-MS-Exchange-CrossTenant-Network-Message-Id: 267ec491-a381-4e36-ffa4-08ded6cd794e X-MS-Exchange-CrossTenant-Id: e609157c-80e2-446d-9be3-9c99c2399d29 X-MS-Exchange-CrossTenant-OriginalAttributedTenantConnectingIp: TenantId=e609157c-80e2-446d-9be3-9c99c2399d29;Ip=[91.26.50.189];Helo=[Postix.phytec.de] X-MS-Exchange-CrossTenant-AuthSource: AM4PEPF00025F96.EURPRD83.prod.outlook.com X-MS-Exchange-CrossTenant-AuthAs: Anonymous X-MS-Exchange-CrossTenant-FromEntityHeader: HybridOnPrem X-MS-Exchange-Transport-CrossTenantHeadersStamped: GV2P195MB1966 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.9.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20260630_103203_450769_6D3655C1 X-CRM114-Status: GOOD ( 15.78 ) X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org Add support for the PHYTEC phyCORE-AM67x SoM [1] and the corresponding phyBOARD-Rigel carrier board [2]. The phyCORE-AM67x SoM uses the TI AM67x SoC and can come with different sizes and models of DDR, eMMC, and SPI NOR Flash. Supported features: * Audio playback and recording * CAN * Debug UART * eMMC * Ethernet * GPIO buttons * Heartbeat LED * I2C Current sensor * I2C EEPROM * I2C Light sensor * I2C RTC * Micro SD card * SPI NOR flash * USB [1] https://www.phytec.com/product/phycore-am67x/ [2] https://www.phytec.com/product/phyboard-am67x-development-kit/ Signed-off-by: Nathan Morrisson Reviewed-by: Andrew Davis Reviewed-by: Wadim Egorov --- Changes in v4: * Swap the order of SPL, SPKR L and SPR, SPKR R in for the audio card to use the proper sink, source ordering. arch/arm64/boot/dts/ti/Makefile | 1 + .../boot/dts/ti/k3-am67-phycore-som.dtsi | 324 +++++++++++++ .../boot/dts/ti/k3-am6754-phyboard-rigel.dts | 431 ++++++++++++++++++ 3 files changed, 756 insertions(+) create mode 100644 arch/arm64/boot/dts/ti/k3-am67-phycore-som.dtsi create mode 100644 arch/arm64/boot/dts/ti/k3-am6754-phyboard-rigel.dts diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile index 371f9a043fe5..623ee2369132 100644 --- a/arch/arm64/boot/dts/ti/Makefile +++ b/arch/arm64/boot/dts/ti/Makefile @@ -184,6 +184,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-j721s2-evm-pcie1-ep.dtbo dtb-$(CONFIG_ARCH_K3) += k3-j721s2-evm-usb0-type-a.dtbo # Boards with J722s SoC +dtb-$(CONFIG_ARCH_K3) += k3-am6754-phyboard-rigel.dtb dtb-$(CONFIG_ARCH_K3) += k3-am67a-beagley-ai.dtb dtb-$(CONFIG_ARCH_K3) += k3-j722s-evm.dtb dtb-$(CONFIG_ARCH_K3) += k3-j722s-evm-csi2-quad-rpi-cam-imx219.dtbo diff --git a/arch/arm64/boot/dts/ti/k3-am67-phycore-som.dtsi b/arch/arm64/boot/dts/ti/k3-am67-phycore-som.dtsi new file mode 100644 index 000000000000..bc74c4eef193 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am67-phycore-som.dtsi @@ -0,0 +1,324 @@ +// SPDX-License-Identifier: GPL-2.0-only OR MIT +/* + * Copyright (C) 2026 PHYTEC America LLC + * Author: Nathan Morrisson + */ + +#include +#include +#include +#include + +/ { + compatible = "phytec,am67-phycore-som", "ti,j722s"; + model = "PHYTEC phyCORE-AM67"; + + aliases { + ethernet0 = &cpsw_port1; + gpio0 = &main_gpio0; + mmc0 = &sdhci0; + rtc0 = &i2c_som_rtc; + rtc1 = &wkup_rtc0; + spi0 = &ospi0; + }; + + memory@80000000 { + /* 4G RAM */ + reg = <0x00000000 0x80000000 0x00000000 0x80000000>, + <0x00000008 0x80000000 0x00000000 0x80000000>; + device_type = "memory"; + bootph-all; + }; + + reserved_memory: reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + secure_tfa_ddr: tfa@9e780000 { + reg = <0x00 0x9e780000 0x00 0x80000>; + no-map; + }; + + secure_ddr: optee@9e800000 { + reg = <0x00 0x9e800000 0x00 0x01800000>; + no-map; + }; + + wkup_r5fss0_core0_dma_memory_region: memory@a0000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa0000000 0x00 0x100000>; + no-map; + }; + + wkup_r5fss0_core0_memory_region: memory@a0100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa0100000 0x00 0xf00000>; + no-map; + }; + }; + + vcc_5v0_som: regulator-vcc-5v0-som { + compatible = "regulator-fixed"; + regulator-name = "VCC_5V0_SOM"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&leds_pins_default>; + + led-0 { + color = ; + gpios = <&main_gpio0 13 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + function = LED_FUNCTION_HEARTBEAT; + }; + }; +}; + +&main_pmx0 { + leds_pins_default: leds-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x034, PIN_OUTPUT, 7) /* (K22) OSPI0_CSN2.GPIO0_13 */ + >; + }; + + mdio_pins_default: mdio-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x0160, PIN_OUTPUT, 0) /* (AC24) MDIO0_MDC */ + J722S_IOPAD(0x015c, PIN_INPUT, 0) /* (AD25) MDIO0_MDIO */ + >; + bootph-all; + }; + + ospi0_pins_default: ospi0-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x000, PIN_OUTPUT, 0) /* (L24) OSPI0_CLK */ + J722S_IOPAD(0x02c, PIN_OUTPUT, 0) /* (K26) OSPI0_CSn0 */ + J722S_IOPAD(0x00c, PIN_INPUT, 0) /* (K27) OSPI0_D0 */ + J722S_IOPAD(0x010, PIN_INPUT, 0) /* (L27) OSPI0_D1 */ + J722S_IOPAD(0x014, PIN_INPUT, 0) /* (L26) OSPI0_D2 */ + J722S_IOPAD(0x018, PIN_INPUT, 0) /* (L25) OSPI0_D3 */ + J722S_IOPAD(0x01c, PIN_INPUT, 0) /* (L21) OSPI0_D4 */ + J722S_IOPAD(0x020, PIN_INPUT, 0) /* (M26) OSPI0_D5 */ + J722S_IOPAD(0x024, PIN_INPUT, 0) /* (N27) OSPI0_D6 */ + J722S_IOPAD(0x028, PIN_INPUT, 0) /* (M27) OSPI0_D7 */ + J722S_IOPAD(0x008, PIN_INPUT, 0) /* (L22) OSPI0_DQS */ + J722S_IOPAD(0x038, PIN_INPUT, 7) /* (J22) OSPI0_CSn3.GPIO0_14 */ + >; + bootph-all; + }; + + pmic_irq_pins_default: pmic-irq-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x030, PIN_INPUT, 7) /* (K23) OSPI0_CSN1.GPIO0_12 */ + >; + }; + + rgmii1_pins_default: rgmii1-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x014c, PIN_INPUT, 0) /* (AC25) RGMII1_RD0 */ + J722S_IOPAD(0x0150, PIN_INPUT, 0) /* (AD27) RGMII1_RD1 */ + J722S_IOPAD(0x0154, PIN_INPUT, 0) /* (AE24) RGMII1_RD2 */ + J722S_IOPAD(0x0158, PIN_INPUT, 0) /* (AE26) RGMII1_RD3 */ + J722S_IOPAD(0x0148, PIN_INPUT, 0) /* (AE27) RGMII1_RXC */ + J722S_IOPAD(0x0144, PIN_INPUT, 0) /* (AD23) RGMII1_RX_CTL */ + J722S_IOPAD(0x0134, PIN_OUTPUT, 0) /* (AF27) RGMII1_TD0 */ + J722S_IOPAD(0x0138, PIN_OUTPUT, 0) /* (AE23) RGMII1_TD1 */ + J722S_IOPAD(0x013c, PIN_OUTPUT, 0) /* (AG25) RGMII1_TD2 */ + J722S_IOPAD(0x0140, PIN_OUTPUT, 0) /* (AF24) RGMII1_TD3 */ + J722S_IOPAD(0x0130, PIN_OUTPUT, 0) /* (AG26) RGMII1_TXC */ + J722S_IOPAD(0x012c, PIN_OUTPUT, 0) /* (AF25) RGMII1_TX_CTL */ + >; + bootph-all; + }; +}; + +&mcu_pmx0 { + wkup_i2c0_pins_default: wkup-i2c0-default-pins { + pinctrl-single,pins = < + J722S_MCU_IOPAD(0x04c, PIN_INPUT_PULLUP, 0) /* (B9) WKUP_I2C0_SCL */ + J722S_MCU_IOPAD(0x050, PIN_INPUT_PULLUP, 0) /* (D11) WKUP_I2C0_SDA */ + >; + bootph-all; + }; +}; + +&cpsw3g { + pinctrl-names = "default"; + pinctrl-0 = <&rgmii1_pins_default>; + bootph-all; + status = "okay"; +}; + +&cpsw3g_mdio { + pinctrl-names = "default"; + pinctrl-0 = <&mdio_pins_default>; + status = "okay"; + + cpsw3g_phy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + ti,rx-internal-delay = ; + tx-fifo-depth = ; + ti,min-output-impedance; + }; +}; + +&cpsw_port1 { + phy-mode = "rgmii-id"; + phy-handle = <&cpsw3g_phy1>; + status = "okay"; +}; + +&ospi0 { + pinctrl-names = "default"; + pinctrl-0 = <&ospi0_pins_default>; + bootph-all; + status = "okay"; + + serial_flash: flash@0 { + compatible = "jedec,spi-nor"; + reg = <0x0>; + spi-tx-bus-width = <8>; + spi-rx-bus-width = <8>; + spi-max-frequency = <25000000>; + vcc-supply = <&vdd_1v8>; + cdns,tshsl-ns = <60>; + cdns,tsd2d-ns = <60>; + cdns,tchsh-ns = <60>; + cdns,tslch-ns = <60>; + cdns,read-delay = <0>; + }; +}; + +&sdhci0 { + non-removable; + bootph-all; + ti,driver-strength-ohm = <50>; + status = "okay"; +}; + +&wkup_i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&wkup_i2c0_pins_default>; + clock-frequency = <400000>; + bootph-all; + status = "okay"; + + pmic@30 { + compatible = "ti,tps65219"; + reg = <0x30>; + buck1-supply = <&vcc_5v0_som>; + buck2-supply = <&vcc_5v0_som>; + buck3-supply = <&vcc_5v0_som>; + ldo1-supply = <&vdd_3v3>; + ldo2-supply = <&vdd_1v8>; + ldo3-supply = <&vdd_3v3>; + ldo4-supply = <&vdd_3v3>; + + pinctrl-names = "default"; + pinctrl-0 = <&pmic_irq_pins_default>; + interrupt-parent = <&main_gpio0>; + interrupts = <12 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <1>; + + system-power-controller; + ti,power-button; + + regulators { + vdd_3v3: buck1 { + regulator-name = "VDD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + vdd_1v8: buck2 { + regulator-name = "VDD_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + vdd_lpddr4: buck3 { + regulator-name = "VDD_LPDDR4"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-boot-on; + regulator-always-on; + }; + + vddshv_sdio: ldo1 { + regulator-name = "VDDSHV_SDIO"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-allow-bypass; + regulator-boot-on; + regulator-always-on; + }; + + vdd_1v2: ldo2 { + regulator-name = "VDD_1V2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-boot-on; + regulator-always-on; + }; + + vdda_1v8_phy: ldo3 { + regulator-name = "VDDA_1V8_PHY"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + vdd_1v8_pll: ldo4 { + regulator-name = "VDD_1V8_PLL"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + + vdd_core: regulator-vdd-core@44 { + compatible = "ti,tps62873"; + reg = <0x44>; + bootph-pre-ram; + regulator-name = "VDD_CORE"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-boot-on; + regulator-always-on; + }; + + eeprom@50 { + compatible = "atmel,24c32"; + reg = <0x50>; + pagesize = <32>; + }; + + som_eeprom_opt: eeprom@51 { + compatible = "atmel,24c32"; + reg = <0x51>; + pagesize = <32>; + }; + + i2c_som_rtc: rtc@52 { + compatible = "microcrystal,rv3028"; + reg = <0x52>; + }; +}; + +#include "k3-j722s-ti-ipc-firmware.dtsi" diff --git a/arch/arm64/boot/dts/ti/k3-am6754-phyboard-rigel.dts b/arch/arm64/boot/dts/ti/k3-am6754-phyboard-rigel.dts new file mode 100644 index 000000000000..5fd4a8ceca16 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am6754-phyboard-rigel.dts @@ -0,0 +1,431 @@ +// SPDX-License-Identifier: GPL-2.0-only OR MIT +/* + * Copyright (C) 2026 PHYTEC America LLC + * Author: Nathan Morrisson + */ + +/dts-v1/; + +#include +#include +#include +#include +#include "k3-serdes.h" +#include "k3-j722s.dtsi" +#include "k3-am67-phycore-som.dtsi" + +/ { + compatible = "phytec,am6754-phyboard-rigel", + "phytec,am67-phycore-som", "ti,j722s"; + model = "PHYTEC phyBOARD-Rigel AM67"; + + aliases { + gpio1 = &main_gpio1; + mmc1 = &sdhci1; + serial2 = &main_uart0; + usb0 = &usb0; + usb1 = &usb1; + }; + + can_tc0: can-phy0 { + compatible = "ti,tcan1042"; + #phy-cells = <0>; + max-bitrate = <8000000>; + standby-gpios = <&gpio_exp1 1 GPIO_ACTIVE_HIGH>; + }; + + usb0_connector: connector { + compatible = "gpio-usb-b-connector", "usb-b-connector"; + label = "USB-C"; + data-role = "dual"; + + pinctrl-names = "default"; + pinctrl-0 = <&main_usbc_power_pins_default>; + + id-gpios = <&main_gpio1 15 GPIO_ACTIVE_HIGH>; + + port { + usb0_con: endpoint { + remote-endpoint = <&usb0_ep>; + }; + }; + }; + + keys { + compatible = "gpio-keys"; + autorepeat; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_pins_default>; + + key-home { + label = "home"; + linux,code = ; + gpios = <&main_gpio1 23 GPIO_ACTIVE_HIGH>; + }; + + key-menu { + label = "menu"; + linux,code = ; + gpios = <&gpio_exp1 4 GPIO_ACTIVE_HIGH>; + }; + }; + + vcc_1v8: regulator-vcc-1v8 { + compatible = "regulator-fixed"; + regulator-name = "VCC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + vcc_3v3_aud: regulator-vcc-3v3-aud { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3_AUD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + vcc_3v3_mmc: regulator-vcc-3v3-mmc { + /* TPS22963C OUTPUT */ + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3_MMC"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + vcc_3v3_sw: regulator-vcc-3v3-sw { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3_SW"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + vcc_speaker: regulator-vcc-speaker { + compatible = "regulator-fixed"; + regulator-name = "VCC_SPEAKER"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,widgets = + "Microphone", "Mic Jack", + "Headphone", "Headphone Jack", + "Line", "Stereo Jack", + "Speaker", "L SPKR", + "Speaker", "R SPKR"; + simple-audio-card,routing = + "MIC1RP", "Mic Jack", + "Mic Jack", "MICBIAS", + "Headphone Jack", "HPL", + "Headphone Jack", "HPR", + "MIC1LM", "Stereo Jack", + "MIC1LP", "Stereo Jack", + "L SPKR", "SPL", + "R SPKR", "SPR"; + simple-audio-card,name = "phyBOARD-Rigel"; + simple-audio-card,format = "dsp_b"; + simple-audio-card,bitclock-master = <&sound_master>; + simple-audio-card,frame-master = <&sound_master>; + simple-audio-card,bitclock-inversion; + + simple-audio-card,cpu { + sound-dai = <&mcasp0>; + }; + + sound_master: simple-audio-card,codec { + sound-dai = <&audio_codec>; + clocks = <&audio_refclk1>; + }; + }; +}; + +&main_pmx0 { + audio_ext_refclk1_pins_default: audio-ext-refclk1-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x0a0, PIN_OUTPUT, 1) /* (N24) GPMC0_WPn.AUDIO_EXT_REFCLK1 */ + >; + }; + + gpio_exp0_int_pins_default: gpio-exp0-int-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x0054, PIN_INPUT, 7) /* (T21) GPMC0_AD6.GPIO0_21 */ + >; + }; + + gpio_exp1_int_pins_default: gpio-exp1-int-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x0244, PIN_INPUT, 7) /* (A24) MMC1_SDWP.GPIO1_49 */ + >; + }; + + gpio_exp2_int_pins_default: gpio-exp2-int-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x0050, PIN_INPUT, 7) /* (T24) GPMC0_AD5.GPIO0_20 */ + >; + }; + + gpio_keys_pins_default: gpio-keys-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x01d4, PIN_INPUT, 7) /* (B21) UART0_RTSn.GPIO1_23 */ + >; + }; + + main_i2c0_pins_default: main-i2c0-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x01e0, PIN_INPUT_PULLUP, 0) /* (D23) I2C0_SCL */ + J722S_IOPAD(0x01e4, PIN_INPUT_PULLUP, 0) /* (B22) I2C0_SDA */ + >; + bootph-all; + }; + + main_i2c1_pins_default: main-i2c1-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x01e8, PIN_INPUT_PULLUP, 0) /* (C24) I2C1_SCL */ + J722S_IOPAD(0x01ec, PIN_INPUT_PULLUP, 0) /* (A22) I2C1_SDA */ + >; + bootph-all; + }; + + main_mcan0_pins_default: main-mcan0-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x1dc, PIN_INPUT, 0) /* (C22) MCAN0_RX */ + J722S_IOPAD(0x1d8, PIN_OUTPUT, 0) /* (D22) MCAN0_TX */ + >; + }; + + main_mcasp0_pins_default: main-mcasp0-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x1a8, PIN_INPUT, 0) /* (C26) MCASP0_AFSX */ + J722S_IOPAD(0x1a4, PIN_INPUT, 0) /* (D25) MCASP0_ACLKX */ + J722S_IOPAD(0x198, PIN_OUTPUT, 0) /* (A26) MCASP0_AXR2 */ + J722S_IOPAD(0x194, PIN_INPUT, 0) /* (A25) MCASP0_AXR3 */ + >; + }; + + main_mmc1_pins_default: main-mmc1-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x023c, PIN_INPUT, 0) /* (H22) MMC1_CMD */ + J722S_IOPAD(0x0234, PIN_INPUT, 0) /* (H24) MMC1_CLK */ + J722S_IOPAD(0x0230, PIN_INPUT, 0) /* (H23) MMC1_DAT0 */ + J722S_IOPAD(0x022c, PIN_INPUT, 0) /* (H20) MMC1_DAT1 */ + J722S_IOPAD(0x0228, PIN_INPUT, 0) /* (J23) MMC1_DAT2 */ + J722S_IOPAD(0x0224, PIN_INPUT, 0) /* (H25) MMC1_DAT3 */ + J722S_IOPAD(0x0240, PIN_INPUT, 0) /* (B24) MMC1_SDCD */ + >; + bootph-all; + }; + + main_uart0_pins_default: main-uart0-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x01c8, PIN_INPUT, 0) /* (F19) UART0_RXD */ + J722S_IOPAD(0x01cc, PIN_OUTPUT, 0) /* (F20) UART0_TXD */ + >; + bootph-all; + }; + + main_usbc_power_pins_default: main-usbc-power-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x1b4, PIN_INPUT, 7) /* (B20) SPI0_CS0.GPIO1_15 */ + >; + }; +}; + +&audio_refclk1 { + assigned-clock-rates = <25000000>; +}; + +&main_i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c0_pins_default>; + clock-frequency = <400000>; + status = "okay"; + + veml6030: light-sensor@10 { + compatible = "vishay,veml6030"; + reg = <0x10>; + vdd-supply = <&vcc_3v3_sw>; + }; +}; + +&main_i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c1_pins_default>; + clock-frequency = <100000>; + status = "okay"; + + audio_codec: audio-codec@18 { + compatible = "ti,tlv320aic3110"; + reg = <0x18>; + pinctrl-names = "default"; + pinctrl-0 = <&audio_ext_refclk1_pins_default>; + #sound-dai-cells = <0>; + ai31xx-micbias-vg = <2>; + reset-gpios = <&gpio_exp1 7 GPIO_ACTIVE_LOW>; + + HPVDD-supply = <&vcc_3v3_aud>; + SPRVDD-supply = <&vcc_speaker>; + SPLVDD-supply = <&vcc_speaker>; + AVDD-supply = <&vcc_3v3_aud>; + IOVDD-supply = <&vcc_3v3_aud>; + DVDD-supply = <&vcc_1v8>; + }; + + gpio_exp0: gpio@20 { + compatible = "nxp,pcf8574"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_exp0_int_pins_default>; + interrupt-parent = <&main_gpio0>; + interrupts = <21 IRQ_TYPE_EDGE_FALLING>; + gpio-line-names = "CSI3_STROBE", "CSI3_TRIGGER", + "CSI3_SHUTTER", "CSI3_OE", + "CSI2_STROBE", "CSI2_TRIGGER", + "CSI2_SHUTTER", "CSI2_OE"; + }; + + gpio_exp1: gpio@21 { + compatible = "nxp,pcf8574"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_exp1_int_pins_default>; + interrupt-parent = <&main_gpio1>; + interrupts = <49 IRQ_TYPE_EDGE_FALLING>; + gpio-line-names = "GPIO0_HDMI_RST", "GPIO1_CAN_nEN", + "GPIO2_LED", "GPIO3_MCU_CAN0_nEN", + "GPIO4_BUT2", "GPIO5_MCU_CAN1_nEN", + "GPIO6_AUDIO_GPIO", "GPIO7_AUDIO_USER_RESET"; + }; + + gpio_exp2: gpio@23 { + compatible = "nxp,pcf8574"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_exp2_int_pins_default>; + interrupt-parent = <&main_gpio0>; + interrupts = <20 IRQ_TYPE_EDGE_FALLING>; + gpio-line-names = "CSI1_STROBE", "CSI1_TRIGGER", + "CSI1_SHUTTER", "CSI1_OE", + "CSI0_STROBE", "CSI0_TRIGGER", + "CSI0_SHUTTER", "CSI0_OE"; + }; + + current-sensor@40 { + compatible = "ti,ina233"; + reg = <0x40>; + shunt-resistor = <18000>; + }; + + eeprom@51 { + compatible = "atmel,24c02"; + reg = <0x51>; + pagesize = <16>; + }; +}; + +&main_mcan0 { + pinctrl-names = "default"; + pinctrl-0 = <&main_mcan0_pins_default>; + phys = <&can_tc0>; + status = "okay"; +}; + +&main_uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&main_uart0_pins_default>; + bootph-all; + status = "okay"; +}; + +&mcasp0 { + #sound-dai-cells = <0>; + op-mode = <0>; /* MCASP_IIS_MODE */ + pinctrl-names = "default"; + pinctrl-0 = <&main_mcasp0_pins_default>; + tdm-slots = <2>; + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 0 0 1 2 + 0 0 0 0 + 0 0 0 0 + 0 0 0 0 + >; + status = "okay"; +}; + +&sdhci1 { + /* SD/MMC */ + vmmc-supply = <&vcc_3v3_mmc>; + vqmmc-supply = <&vddshv_sdio>; + pinctrl-names = "default"; + pinctrl-0 = <&main_mmc1_pins_default>; + disable-wp; + no-1-8-v; + bootph-all; + status = "okay"; +}; + +&serdes_ln_ctrl { + idle-states = , + ; +}; + +&serdes0 { + status = "okay"; + + serdes0_usb_link: phy@0 { + reg = <0>; + cdns,num-lanes = <1>; + #phy-cells = <0>; + cdns,phy-type = ; + resets = <&serdes_wiz0 1>; + }; +}; + +&serdes_wiz0 { + status = "okay"; +}; + +&usbss0 { + ti,vbus-divider; + status = "okay"; +}; + +&usb0 { + dr_mode = "otg"; + usb-role-switch; + maximum-speed = "high-speed"; + + port { + usb0_ep: endpoint { + remote-endpoint = <&usb0_con>; + }; + }; +}; + +&usbss1 { + ti,vbus-divider; + status = "okay"; +}; + +&usb1 { + dr_mode = "host"; + phys = <&serdes0_usb_link>; + phy-names = "cdns3,usb3-phy"; + maximum-speed = "super-speed"; +}; -- 2.43.0