[PATCH v3 4/7] clk: qcom: Make important ARM32 drivers default

[Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>]

Clock controller drivers are essential for booting up SoCs and are not
really optional for a given platform.  Kernel should not ask users
choice of drivers when that choice is obvious and known to the
developers that answer should be 'yes' or 'module'.

Switch all Qualcomm clock controller drivers which are chosen in
ARM 32-bit qcom defconfig to a default 'yes'.

This has no impact on ARM32 qcom defconfig and ARM64 defconfig
include/generated/autoconf.h, however enables a few drivers for ARM32
multi_v7 defconfig: IPQ_GCC_4019, QCOM_CLK_APCS_SDX55, MSM_LCC_8960,
SDX_GCC_55, QCOM_CLK_RPMH as module, IPQ_GCC_806X, IPQ_LCC_806X and
QCOM_A7PLL.  Enabling these on multi_v7 is expected to properly boot
these SoCs with defconfig.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>

---

Changes in v2:
1. New patch
---
 drivers/clk/qcom/Kconfig | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index db3b67fafbc3..11adab354eb1 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -271,6 +271,7 @@ config QCOM_A53PLL
 config QCOM_A7PLL
 	tristate "A7 PLL driver for SDX55 and SDX65"
 	depends on ARM || COMPILE_TEST
+	default ARCH_QCOM
 	help
 	  Support for the A7 PLL on SDX55 and SDX65 devices. It provides the CPU with
 	  frequencies above 1GHz.
@@ -302,6 +303,7 @@ config QCOM_CLK_APCS_SDX55
 	tristate "SDX55 and SDX65 APCS Clock Controller"
 	depends on QCOM_APCS_IPC || COMPILE_TEST
 	depends on ARM || COMPILE_TEST
+	default ARCH_QCOM
 	help
 	  Support for the APCS Clock Controller on SDX55, SDX65 platforms. The
 	  APCS is managing the mux and divider which feeds the CPUs.
@@ -311,6 +313,7 @@ config QCOM_CLK_APCS_SDX55
 config QCOM_CLK_RPM
 	tristate "RPM based Clock Controller"
 	depends on MFD_QCOM_RPM
+	default ARCH_QCOM
 	help
 	  The RPM (Resource Power Manager) is a dedicated hardware engine for
 	  managing the shared SoC resources in order to keep the lowest power
@@ -363,6 +366,7 @@ config APQ_GCC_8084
 	tristate "APQ8084 Global Clock Controller"
 	depends on ARM || COMPILE_TEST
 	select QCOM_GDSC
+	default ARCH_QCOM
 	help
 	  Support for the global clock controller on apq8084 devices.
 	  Say Y if you want to use peripheral devices such as UART, SPI,
@@ -373,6 +377,7 @@ config APQ_MMCC_8084
 	depends on ARM || COMPILE_TEST
 	select APQ_GCC_8084
 	select QCOM_GDSC
+	default ARCH_QCOM
 	help
 	  Support for the multimedia clock controller on apq8084 devices.
 	  Say Y if you want to support multimedia devices such as display,
@@ -424,6 +429,7 @@ config IPQ_CMN_PLL
 config IPQ_GCC_4019
 	tristate "IPQ4019 Global Clock Controller"
 	depends on ARM || COMPILE_TEST
+	default ARCH_QCOM
 	help
 	  Support for the global clock controller on ipq4019 devices.
 	  Say Y if you want to use peripheral devices such as UART, SPI,
@@ -478,6 +484,7 @@ config IPQ_GCC_6018
 config IPQ_GCC_806X
 	tristate "IPQ806x Global Clock Controller"
 	depends on ARM || COMPILE_TEST
+	default ARCH_QCOM
 	help
 	  Support for the global clock controller on ipq806x devices.
 	  Say Y if you want to use peripheral devices such as UART, SPI,
@@ -487,6 +494,7 @@ config IPQ_LCC_806X
 	tristate "IPQ806x LPASS Clock Controller"
 	depends on ARM || COMPILE_TEST
 	select IPQ_GCC_806X
+	default ARCH_QCOM
 	help
 	  Support for the LPASS clock controller on ipq806x devices.
 	  Say Y if you want to use audio devices such as i2s, pcm,
@@ -555,6 +563,7 @@ config IPQ_NSSCC_QCA8K
 config MSM_GCC_8660
 	tristate "MSM8660 Global Clock Controller"
 	depends on ARM || COMPILE_TEST
+	default ARCH_QCOM
 	help
 	  Support for the global clock controller on msm8660 devices.
 	  Say Y if you want to use peripheral devices such as UART, SPI,
@@ -599,6 +608,7 @@ config MSM_GCC_8939
 config MSM_GCC_8960
 	tristate "APQ8064/MSM8960 Global Clock Controller"
 	depends on ARM || COMPILE_TEST
+	default ARCH_QCOM
 	help
 	  Support for the global clock controller on apq8064/msm8960 devices.
 	  Say Y if you want to use peripheral devices such as UART, SPI,
@@ -607,6 +617,7 @@ config MSM_GCC_8960
 config MSM_LCC_8960
 	tristate "APQ8064/MSM8960/MDM9650 LPASS Clock Controller"
 	depends on ARM || COMPILE_TEST
+	default ARCH_QCOM
 	help
 	  Support for the LPASS clock controller on apq8064/msm8960/mdm9650
 	  devices.
@@ -633,6 +644,7 @@ config MSM_MMCC_8960
 	tristate "MSM8960 Multimedia Clock Controller"
 	depends on ARM || COMPILE_TEST
 	select MSM_GCC_8960
+	default ARCH_QCOM
 	help
 	  Support for the multimedia clock controller on msm8960 devices.
 	  Say Y if you want to support multimedia devices such as display,
@@ -651,6 +663,7 @@ config MSM_GCC_8974
 	tristate "MSM8974 Global Clock Controller"
 	depends on ARM || COMPILE_TEST
 	select QCOM_GDSC
+	default ARCH_QCOM
 	help
 	  Support for the global clock controller on msm8974 devices.
 	  Say Y if you want to use peripheral devices such as UART, SPI,
@@ -661,6 +674,7 @@ config MSM_MMCC_8974
 	depends on ARM || COMPILE_TEST
 	select MSM_GCC_8974
 	select QCOM_GDSC
+	default ARCH_QCOM
 	help
 	  Support for the multimedia clock controller on msm8974 devices.
 	  Say Y if you want to support multimedia devices such as display,
@@ -1234,6 +1248,7 @@ config SDX_GCC_55
 	tristate "SDX55 Global Clock Controller"
 	depends on ARM || COMPILE_TEST
 	select QCOM_GDSC
+	default ARCH_QCOM
 	help
 	  Support for the global clock controller on SDX55 devices.
 	  Say Y if you want to use peripheral devices such as UART,

-- 
2.53.0