From: wei.fang@oss.nxp.com
To: claudiu.manoil@nxp.com, vladimir.oltean@nxp.com,
xiaoning.wang@nxp.com, andrew+netdev@lunn.ch,
davem@davemloft.net, edumazet@google.com, kuba@kernel.org,
pabeni@redhat.com, linux@armlinux.org.uk, wei.fang@nxp.com,
chleroy@kernel.org, maxime.chevallier@bootlin.com
Cc: imx@lists.linux.dev, netdev@vger.kernel.org,
linux-kernel@vger.kernel.org, linuxppc-dev@lists.ozlabs.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 net-next 10/14] net: enetc: refactor SI VLAN promiscuous mode configuration
Date: Fri, 3 Jul 2026 18:13:24 +0800 [thread overview]
Message-ID: <20260703101328.550714-11-wei.fang@oss.nxp.com> (raw)
In-Reply-To: <20260703101328.550714-1-wei.fang@oss.nxp.com>
From: Wei Fang <wei.fang@nxp.com>
Remove the enetc_set_vlan_promisc(), enetc_enable_si_vlan_promisc() and
enetc_disable_si_vlan_promisc() functions, and introduce a new unified
function enetc_set_si_vlan_promisc() to enable or disable VLAN
promiscuous mode for a specific SI. This simplifies the logic and makes
the interface more straightforward. The vlan_promisc_simap field in
struct enetc_pf is no longer needed to track the current state.
As ENETC V4 only changes the address offset of PSIPVMR register compared
to V1 without any functional difference, enetc_set_si_vlan_promisc() can
be moved to enetc_pf_common.c in the future with minor adjustments to be
reused by the ENETC V4 driver
Signed-off-by: Wei Fang <wei.fang@nxp.com>
---
.../net/ethernet/freescale/enetc/enetc_hw.h | 5 ++-
.../net/ethernet/freescale/enetc/enetc_pf.c | 36 ++++++++-----------
.../net/ethernet/freescale/enetc/enetc_pf.h | 1 -
3 files changed, 16 insertions(+), 26 deletions(-)
diff --git a/drivers/net/ethernet/freescale/enetc/enetc_hw.h b/drivers/net/ethernet/freescale/enetc/enetc_hw.h
index 66bfda60da9c..16da732dc5de 100644
--- a/drivers/net/ethernet/freescale/enetc/enetc_hw.h
+++ b/drivers/net/ethernet/freescale/enetc/enetc_hw.h
@@ -185,9 +185,8 @@ enum enetc_bdr_type {TX, RX};
#define PSIPMMR_SI_MAC_MP(n) BIT((n) + 16)
#define ENETC_PSIPVMR 0x001c
-#define ENETC_VLAN_PROMISC_MAP_ALL 0x7
-#define ENETC_PSIPVMR_SET_VP(simap) ((simap) & 0x7)
-#define ENETC_PSIPVMR_SET_VUTA(simap) (((simap) & 0x7) << 16)
+#define PSIPVMR_SI_VLAN_P(n) BIT(n) /* n = SI index */
+
#define ENETC_PSIPMAR0(n) (0x0100 + (n) * 0x8) /* n = SI index */
#define ENETC_PSIPMAR1(n) (0x0104 + (n) * 0x8)
#define ENETC_PVCLCTR 0x0208
diff --git a/drivers/net/ethernet/freescale/enetc/enetc_pf.c b/drivers/net/ethernet/freescale/enetc/enetc_pf.c
index db2a800a7aaf..afc02ed62c77 100644
--- a/drivers/net/ethernet/freescale/enetc/enetc_pf.c
+++ b/drivers/net/ethernet/freescale/enetc/enetc_pf.c
@@ -42,24 +42,20 @@ static void enetc_pf_destroy_pcs(struct phylink_pcs *pcs)
lynx_pcs_destroy(pcs);
}
-static void enetc_set_vlan_promisc(struct enetc_hw *hw, char si_map)
+static void enetc_set_si_vlan_promisc(struct enetc_si *si, int si_id,
+ bool promisc)
{
- u32 val = enetc_port_rd(hw, ENETC_PSIPVMR);
+ struct enetc_hw *hw = &si->hw;
+ u32 val;
- val &= ~ENETC_PSIPVMR_SET_VP(ENETC_VLAN_PROMISC_MAP_ALL);
- enetc_port_wr(hw, ENETC_PSIPVMR, ENETC_PSIPVMR_SET_VP(si_map) | val);
-}
+ val = enetc_port_rd(hw, ENETC_PSIPVMR);
-static void enetc_enable_si_vlan_promisc(struct enetc_pf *pf, int si_idx)
-{
- pf->vlan_promisc_simap |= BIT(si_idx);
- enetc_set_vlan_promisc(&pf->si->hw, pf->vlan_promisc_simap);
-}
+ if (promisc)
+ val |= PSIPVMR_SI_VLAN_P(si_id);
+ else
+ val &= ~PSIPVMR_SI_VLAN_P(si_id);
-static void enetc_disable_si_vlan_promisc(struct enetc_pf *pf, int si_idx)
-{
- pf->vlan_promisc_simap &= ~BIT(si_idx);
- enetc_set_vlan_promisc(&pf->si->hw, pf->vlan_promisc_simap);
+ enetc_port_wr(hw, ENETC_PSIPVMR, val);
}
static void enetc_set_isol_vlan(struct enetc_hw *hw, int si, u16 vlan, u8 qos)
@@ -441,10 +437,9 @@ static void enetc_configure_port(struct enetc_pf *pf)
/* split up RFS entries */
enetc_port_assign_rfs_entries(pf->si);
-
/* enforce VLAN promisc mode for all SIs */
- pf->vlan_promisc_simap = ENETC_VLAN_PROMISC_MAP_ALL;
- enetc_set_vlan_promisc(hw, pf->vlan_promisc_simap);
+ for (int i = 0; i < pf->total_vfs + 1; i++)
+ enetc_set_si_vlan_promisc(pf->si, i, true);
enetc_port_wr(hw, ENETC_PSIPMMR, 0);
@@ -466,12 +461,9 @@ static int enetc_pf_set_features(struct net_device *ndev,
}
if (changed & NETIF_F_HW_VLAN_CTAG_FILTER) {
- struct enetc_pf *pf = enetc_si_priv(priv->si);
+ bool promisc = !(features & NETIF_F_HW_VLAN_CTAG_FILTER);
- if (!!(features & NETIF_F_HW_VLAN_CTAG_FILTER))
- enetc_disable_si_vlan_promisc(pf, 0);
- else
- enetc_enable_si_vlan_promisc(pf, 0);
+ enetc_set_si_vlan_promisc(priv->si, 0, promisc);
}
if (changed & NETIF_F_LOOPBACK)
diff --git a/drivers/net/ethernet/freescale/enetc/enetc_pf.h b/drivers/net/ethernet/freescale/enetc/enetc_pf.h
index 7e886dc49997..1bd3063a3be3 100644
--- a/drivers/net/ethernet/freescale/enetc/enetc_pf.h
+++ b/drivers/net/ethernet/freescale/enetc/enetc_pf.h
@@ -45,7 +45,6 @@ struct enetc_pf {
struct work_struct msg_task;
char msg_int_name[ENETC_INT_NAME_MAX];
- char vlan_promisc_simap; /* bitmap of SIs in VLAN promisc mode */
DECLARE_BITMAP(vlan_ht_filter, ENETC_VLAN_HT_SIZE);
DECLARE_BITMAP(active_vlans, VLAN_N_VID);
--
2.34.1
next prev parent reply other threads:[~2026-07-03 10:43 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-03 10:13 [PATCH v3 net-next 00/14] net: enetc: cleanups and improvements wei.fang
2026-07-03 10:13 ` [PATCH v3 net-next 01/14] net: enetc: extract common helpers for MAC promiscuous mode setting wei.fang
2026-07-03 10:13 ` [PATCH v3 net-next 02/14] net: enetc: extract common helpers for MAC hash filter configuration wei.fang
2026-07-03 10:13 ` [PATCH v3 net-next 03/14] net: enetc: convert ndo_set_rx_mode() to ndo_set_rx_mode_async() wei.fang
2026-07-03 10:13 ` [PATCH v3 net-next 04/14] net: enetc: improve MAFT entry management with bitmap tracking wei.fang
2026-07-03 10:13 ` [PATCH v3 net-next 05/14] net: enetc: use PCI device name for debugfs directory wei.fang
2026-07-03 10:13 ` [PATCH v3 net-next 06/14] net: enetc: simplify enetc4_set_port_speed() wei.fang
2026-07-03 10:13 ` [PATCH v3 net-next 07/14] net: enetc: differentiate phylink capabilities for pseudo-MAC and standalone MAC wei.fang
2026-07-03 10:13 ` [PATCH v3 net-next 08/14] net: enetc: remove invalid code from enetc4_pl_mac_link_up() wei.fang
2026-07-03 10:13 ` [PATCH v3 net-next 09/14] net: enetc: open-code enetc4_set_default_si_vlan_promisc() wei.fang
2026-07-03 10:13 ` wei.fang [this message]
2026-07-03 10:13 ` [PATCH v3 net-next 11/14] net: enetc: move enetc_set_si_vlan_promisc() to enetc_pf_common.c wei.fang
2026-07-03 10:13 ` [PATCH v3 net-next 12/14] net: enetc: remove redundant num_vsi field from enetc_port_caps wei.fang
2026-07-03 10:13 ` [PATCH v3 net-next 13/14] net: enetc: use alloc_etherdev_mqs() to create netdev for VF driver wei.fang
2026-07-03 10:13 ` [PATCH v3 net-next 14/14] net: enetc: use kzalloc_flex() for enetc_psfp_gate allocation wei.fang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260703101328.550714-11-wei.fang@oss.nxp.com \
--to=wei.fang@oss.nxp.com \
--cc=andrew+netdev@lunn.ch \
--cc=chleroy@kernel.org \
--cc=claudiu.manoil@nxp.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=imx@lists.linux.dev \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=maxime.chevallier@bootlin.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=vladimir.oltean@nxp.com \
--cc=wei.fang@nxp.com \
--cc=xiaoning.wang@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox