[PATCH v3 12/13] arm64: dts: mediatek: mt8195-cherry: Add M.2 E-key slot

[Chen-Yu Tsai <wenst@chromium.org>]

The Mt8195 Cherry design features an M.2 E-key slot for WiFi/BT combo
cards. Only PCIe and USB are wired from the SoC to the slot, along with
some auxiliary signals.

Add the proper representation for it, replacing the PCIe wifi node and
vpcie3v3-supply property under the PCIe controller, and the vbus-supply
property under the xhci3 node.

Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
---
Changes since v2:
- Drop default GPIO output state from kill pins pinconfig
---
 .../boot/dts/mediatek/mt8195-cherry.dtsi      | 73 +++++++++++++++++--
 1 file changed, 68 insertions(+), 5 deletions(-)

diff --git a/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi
index ef7afc436aef..8d4cc30d91e4 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi
@@ -266,6 +266,47 @@ tboard_thermistor2: thermal-sensor-t2 {
 						120000 51
 						125000 44>;
 	};
+
+	wifi-bt-connector {
+		compatible = "pcie-m2-e-connector";
+		pinctrl-names = "default";
+		pinctrl-0 = <&m2_e_key_kill_pins>;
+		vpcie3v3-supply = <&pp3300_wlan>;
+		w-disable1-gpios = <&pio 61 GPIO_ACTIVE_LOW>;
+		w-disable2-gpios = <&pio 59 GPIO_ACTIVE_LOW>;
+		/* PCIe auxiliary signals wired to controller. */
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* PCIe for WiFi */
+			port@0 {
+				reg = <0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				wifi_ep: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&pcie1_ep>;
+				};
+			};
+
+			/* USB for Bluetooth */
+			port@2 {
+				reg = <2>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				bt_ep: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&usb3_ep>;
+				};
+			};
+
+			/* SDIO, UART and I2S not implemented */
+		};
+	};
 };
 
 &adsp {
@@ -791,14 +832,14 @@ pcie@0 {
 		reg = <0 0 0 0 0>;
 		device_type = "pci";
 		num-lanes = <1>;
-		vpcie3v3-supply = <&pp3300_wlan>;
 		#address-cells = <3>;
 		#size-cells = <2>;
 		ranges;
 
-		wifi@0 {
-			reg = <0 0 0 0 0>;
-			wakeup-source;
+		port {
+			pcie1_ep: endpoint {
+				remote-endpoint = <&wifi_ep>;
+			};
 		};
 	};
 };
@@ -1085,6 +1126,13 @@ pins-bus {
 		};
 	};
 
+	m2_e_key_kill_pins: m2-e-key-kill-pins {
+		pins-kill {
+			pinmux = <PINMUX_GPIO61__FUNC_GPIO61>,
+				 <PINMUX_GPIO59__FUNC_GPIO59>;
+		};
+	};
+
 	mmc0_pins_default: mmc0-default-pins {
 		pins-cmd-dat {
 			pinmux = <PINMUX_GPIO126__FUNC_MSDC0_DAT0>,
@@ -1637,9 +1685,24 @@ &xhci2 {
 &xhci3 {
 	/* MT7921's USB Bluetooth has issues with USB2 LPM */
 	usb2-lpm-disable;
-	vbus-supply = <&pp3300_wlan>;
 	vusb33-supply = <&mt6359_vusb_ldo_reg>;
 	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			usb3_ep: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&bt_ep>;
+			};
+		};
+	};
 };
 
 #include <arm/cros-ec-keyboard.dtsi>
-- 
2.55.0.rc0.799.gd6f94ed593-goog