From: Mikhail Kalashnikov <iuncuim@gmail.com>
To: Vasily Khoruzhick <anarsoul@gmail.com>,
Yangtao Li <tiny.windzz@gmail.com>,
"Rafael J . Wysocki" <rafael@kernel.org>,
Daniel Lezcano <daniel.lezcano@kernel.org>,
Zhang Rui <rui.zhang@intel.com>,
Lukasz Luba <lukasz.luba@arm.com>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Chen-Yu Tsai <wens@kernel.org>,
Jernej Skrabec <jernej.skrabec@gmail.com>,
Samuel Holland <samuel@sholland.org>,
Philipp Zabel <p.zabel@pengutronix.de>
Cc: linux-pm@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-sunxi@lists.linux.dev, linux-kernel@vger.kernel.org
Subject: [PATCH v5 1/5] dt-bindings: thermal: sun8i: Add A523 THS0/1 controllers
Date: Sun, 5 Jul 2026 01:14:07 +0800 [thread overview]
Message-ID: <20260704171411.1413349-2-iuncuim@gmail.com> (raw)
In-Reply-To: <20260704171411.1413349-1-iuncuim@gmail.com>
Add dt-bindings description of the thermal sensors in the A523 processor.
The controllers require activation of the additional frequency of the
associated gpadc controller, so a mod clock property required.
The calibration data for both thermal controllers (THS0, THS1) is split
across two nvmem cells at different offsets, requiring the two cells
to be read and merged. To maintain backward compatibility, the name of
the old cell remains "calibration" and the new cell is named
"calibration-second-part".
Signed-off-by: Mikhail Kalashnikov <iuncuim@gmail.com>
Reviewed-by: Chen-Yu Tsai <wens@kernel.org>
---
.../thermal/allwinner,sun8i-a83t-ths.yaml | 54 +++++++++++++++++--
1 file changed, 51 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml b/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml
index 3e61689f6..6f5b2f3b9 100644
--- a/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml
+++ b/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml
@@ -24,6 +24,8 @@ properties:
- allwinner,sun50i-h5-ths
- allwinner,sun50i-h6-ths
- allwinner,sun50i-h616-ths
+ - allwinner,sun55i-a523-ths0
+ - allwinner,sun55i-a523-ths1
clocks:
minItems: 1
@@ -47,11 +49,16 @@ properties:
maxItems: 1
nvmem-cells:
- maxItems: 1
- description: Calibration data for thermal sensors
+ minItems: 1
+ items:
+ - description: Calibration data for thermal sensors
+ - description: Additional cell in case of separate calibration data
nvmem-cell-names:
- const: calibration
+ minItems: 1
+ items:
+ - const: calibration
+ - const: calibration-second-part
allwinner,sram:
maxItems: 1
@@ -107,6 +114,7 @@ allOf:
enum:
- allwinner,sun8i-h3-ths
- allwinner,sun20i-d1-ths
+ - allwinner,sun55i-a523-ths0
then:
properties:
@@ -132,6 +140,29 @@ allOf:
- clock-names
- resets
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - allwinner,sun55i-a523-ths0
+ - allwinner,sun55i-a523-ths1
+ then:
+ properties:
+ clocks:
+ minItems: 2
+ nvmem-cells:
+ minItems: 2
+ nvmem-cell-names:
+ minItems: 2
+ else:
+ properties:
+ nvmem-cells:
+ maxItems: 1
+ nvmem-cell-names:
+ items:
+ - const: calibration
+
required:
- compatible
- reg
@@ -176,4 +207,21 @@ examples:
#thermal-sensor-cells = <1>;
};
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/sun55i-a523-ccu.h>
+ #include <dt-bindings/reset/sun55i-a523-ccu.h>
+
+ thermal-sensor@2009400 {
+ compatible = "allwinner,sun55i-a523-ths1";
+ reg = <0x02009400 0x400>;
+ interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_GPADC1>;
+ clock-names = "bus", "mod";
+ resets = <&ccu RST_BUS_THS>;
+ nvmem-cells = <&ths_calibration0>, <&ths_calibration1>;
+ nvmem-cell-names = "calibration",
+ "calibration-second-part";
+ #thermal-sensor-cells = <1>;
+ };
...
--
2.55.0
next prev parent reply other threads:[~2026-07-04 17:15 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-04 17:14 [PATCH v5 0/5] Allwinner: A523: add support for A523 THS0/1 controllers Mikhail Kalashnikov
2026-07-04 17:14 ` Mikhail Kalashnikov [this message]
2026-07-05 9:24 ` [PATCH v5 1/5] dt-bindings: thermal: sun8i: Add " Krzysztof Kozlowski
2026-07-04 17:14 ` [PATCH v5 2/5] thermal/drivers/sun8i: replace devm_reset_control_get to devm_reset_control_get_shared_deasserted Mikhail Kalashnikov
2026-07-04 17:14 ` [PATCH v5 3/5] thermal/drivers/sun8i: get calibration data from two nvmem cells Mikhail Kalashnikov
2026-07-04 17:14 ` [PATCH v5 4/5] thermal/drivers/sun8i: Add support for A523 THS0/1 controllers Mikhail Kalashnikov
2026-07-04 17:14 ` [PATCH v5 5/5] arm64: dts: allwinner: sun55i: add thermal sensors Mikhail Kalashnikov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260704171411.1413349-2-iuncuim@gmail.com \
--to=iuncuim@gmail.com \
--cc=anarsoul@gmail.com \
--cc=conor+dt@kernel.org \
--cc=daniel.lezcano@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jernej.skrabec@gmail.com \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-sunxi@lists.linux.dev \
--cc=lukasz.luba@arm.com \
--cc=p.zabel@pengutronix.de \
--cc=rafael@kernel.org \
--cc=robh@kernel.org \
--cc=rui.zhang@intel.com \
--cc=samuel@sholland.org \
--cc=tiny.windzz@gmail.com \
--cc=wens@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox