Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Brian Mayer <bleemayer@gmail.com>
To: Heiko Stuebner <heiko@sntech.de>
Cc: linux-rockchip@lists.infradead.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2] arm64: dts: rockchip: add HYM8563 RTC to Radxa CM5 IO board
Date: Sun,  5 Jul 2026 15:19:19 -0300	[thread overview]
Message-ID: <20260705181920.8633-1-bleemayer@gmail.com> (raw)
In-Reply-To: <2960762.AiC22s8V5E@diego>

Hello again, to clarify: I tested the v1 patch in my radxa cm5, but since
this v2 only contains name changes I didn't test. I added the missing
agent tag and am sending the patch inline. Thanks.

The Radxa CM5 IO carrier has a Haoyu HYM8563 real-time clock on I2C6 at
address 0x51, with its interrupt line on GPIO0_B0 and a CR1220 backup
battery holder. Without a device tree node, no /dev/rtc* appears even
when CONFIG_RTC_DRV_HYM8563 is enabled.

Describe the RTC, wire the interrupt pin with a pull-up, mark it as a
wakeup source, and point the rtc0 alias at it so RTC_HCTOSYS/SYSTOHC use
the external clock. Wiring matches Radxa's downstream board support and
uses schematic names for the rtc_int_l pinctrl entry.

Assisted-by: Grok:grok-build
Signed-off-by: Brian Mayer <bleemayer@gmail.com>
---
 .../dts/rockchip/rk3588s-radxa-cm5-io.dts     | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

Changes in v2:
- Rename pinctrl to rtc_int_l / rtc-int-l to match schematics
- Drop Tested-by (covered by Signed-off-by)
- Add Assisted-by: Grok:grok-build
- Send inline with git send-email (not as attachment)

diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-radxa-cm5-io.dts b/arch/arm64/boot/dts/rockchip/rk3588s-radxa-cm5-io.dts
index af4a9bc01..d22db4d18 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-radxa-cm5-io.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-radxa-cm5-io.dts
@@ -19,6 +19,7 @@ / {
 	aliases {
 		ethernet0 = &gmac1;
 		mmc1 = &sdmmc;
+		rtc0 = &hym8563;
 	};
 
 	chosen {
@@ -198,6 +199,18 @@ usbc0_dp_altmode_mux: endpoint {
 			};
 		};
 	};
+
+	hym8563: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-output-names = "hym8563";
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&rtc_int_l>;
+		wakeup-source;
+	};
 };
 
 &i2s5_8ch {
@@ -221,6 +234,12 @@ usbc0_int: usbc0-int {
 		};
 	};
 
+	hym8563 {
+		rtc_int_l: rtc-int-l {
+			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
 	hdmi {
 		hdmi0_tx_on_h: hdmi0-tx-on-h {
 			rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;

base-commit: 87320be9f0d24fce67631b7eef919f0b79c3e45c
-- 
2.54.0



      reply	other threads:[~2026-07-05 18:20 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-07-02 19:09 [PATCH] arm64: dts: rockchip: add HYM8563 RTC to Radxa CM5 IO board Brian Mayer
2026-07-03 16:12 ` Heiko Stübner
2026-07-05 18:19   ` Brian Mayer [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260705181920.8633-1-bleemayer@gmail.com \
    --to=bleemayer@gmail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=heiko@sntech.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-rockchip@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox