Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
To: Arnd Bergmann <arnd@arndb.de>,
	Russell King <linux@armlinux.org.uk>,
	 Linus Walleij <linusw@kernel.org>,
	Bartosz Golaszewski <brgl@kernel.org>,
	 soc@lists.linux.dev
Cc: linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org,  linux-gpio@vger.kernel.org
Subject: [PATCH 4/4] ARM: sa1100: h3xxx: convert gpio-keys to use software nodes
Date: Mon, 06 Jul 2026 20:14:03 -0700	[thread overview]
Message-ID: <20260706-sa1100-swnode-v1-4-332759bbd930@gmail.com> (raw)
In-Reply-To: <20260706-sa1100-swnode-v1-0-332759bbd930@gmail.com>

Convert the legacy gpio-keys platform device on the StrongARM SA-1100
HP iPAQ H3xxx series boards to use software nodes and device properties.
This helps progress the removal of platform data support from the
gpio-keys driver.

Define static software nodes for the gpio-keys device and the power and
action button child nodes at file scope, referencing the SA-1100 GPIO
controller node directly. In h3xxx_mach_init(), register the software node
group and use platform_device_register_full() to register the device.

Assisted-by: Antigravity:gemini-3.5-flash
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 arch/arm/mach-sa1100/h3xxx.c | 69 +++++++++++++++++++++++++++-----------------
 1 file changed, 42 insertions(+), 27 deletions(-)

diff --git a/arch/arm/mach-sa1100/h3xxx.c b/arch/arm/mach-sa1100/h3xxx.c
index d685f03f51f3..13c0aa4c0bfa 100644
--- a/arch/arm/mach-sa1100/h3xxx.c
+++ b/arch/arm/mach-sa1100/h3xxx.c
@@ -8,9 +8,10 @@
 
 #include <linux/kernel.h>
 #include <linux/gpio/machine.h>
+#include <linux/gpio/property.h>
 #include <linux/gpio.h>
-#include <linux/gpio_keys.h>
 #include <linux/input.h>
+#include <linux/property.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/platform_data/gpio-htc-egpio.h>
@@ -168,35 +169,48 @@ static struct platform_device h3xxx_egpio = {
  * GPIO keys
  */
 
-static struct gpio_keys_button h3xxx_button_table[] = {
-	{
-		.code		= KEY_POWER,
-		.gpio		= H3XXX_GPIO_PWR_BUTTON,
-		.desc		= "Power Button",
-		.active_low	= 1,
-		.type		= EV_KEY,
-		.wakeup		= 1,
-	}, {
-		.code		= KEY_ENTER,
-		.gpio		= H3XXX_GPIO_ACTION_BUTTON,
-		.active_low	= 1,
-		.desc		= "Action button",
-		.type		= EV_KEY,
-		.wakeup		= 0,
-	},
+static const struct software_node h3xxx_gpio_keys_node = {
+	.name = "h3xxx-gpio-keys",
 };
 
-static struct gpio_keys_platform_data h3xxx_keys_data = {
-	.buttons  = h3xxx_button_table,
-	.nbuttons = ARRAY_SIZE(h3xxx_button_table),
+static const struct property_entry h3xxx_power_key_props[] = {
+	PROPERTY_ENTRY_U32("linux,code", KEY_POWER),
+	PROPERTY_ENTRY_GPIO("gpios", &sa1100_gpiochip_node,
+			    H3XXX_GPIO_PWR_BUTTON, GPIO_ACTIVE_LOW),
+	PROPERTY_ENTRY_STRING("label", "Power Button"),
+	PROPERTY_ENTRY_BOOL("wakeup-source"),
+	{ }
 };
 
-static struct platform_device h3xxx_keys = {
-	.name	= "gpio-keys",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &h3xxx_keys_data,
-	},
+static const struct software_node h3xxx_power_key_node = {
+	.parent = &h3xxx_gpio_keys_node,
+	.properties = h3xxx_power_key_props,
+};
+
+static const struct property_entry h3xxx_action_key_props[] = {
+	PROPERTY_ENTRY_U32("linux,code", KEY_ENTER),
+	PROPERTY_ENTRY_GPIO("gpios", &sa1100_gpiochip_node,
+			    H3XXX_GPIO_ACTION_BUTTON, GPIO_ACTIVE_LOW),
+	PROPERTY_ENTRY_STRING("label", "Action button"),
+	{ }
+};
+
+static const struct software_node h3xxx_action_key_node = {
+	.parent = &h3xxx_gpio_keys_node,
+	.properties = h3xxx_action_key_props,
+};
+
+static const struct software_node * const h3xxx_gpio_keys_swnodes[] __initconst = {
+	&h3xxx_gpio_keys_node,
+	&h3xxx_power_key_node,
+	&h3xxx_action_key_node,
+	NULL
+};
+
+static const struct platform_device_info h3xxx_gpio_keys_dev_info __initconst = {
+	.name = "gpio-keys",
+	.id = PLATFORM_DEVID_NONE,
+	.swnode = &h3xxx_gpio_keys_node,
 };
 
 static struct resource h3xxx_micro_resources[] = {
@@ -214,7 +228,6 @@ struct platform_device h3xxx_micro_asic = {
 
 static struct platform_device *h3xxx_devices[] = {
 	&h3xxx_egpio,
-	&h3xxx_keys,
 	&h3xxx_micro_asic,
 };
 
@@ -240,6 +253,8 @@ void __init h3xxx_mach_init(void)
 	sa1100_register_uart_fns(&h3xxx_port_fns);
 	sa11x0_register_mtd(&h3xxx_flash_data, &h3xxx_flash_resource, 1);
 	platform_add_devices(h3xxx_devices, ARRAY_SIZE(h3xxx_devices));
+	software_node_register_node_group(h3xxx_gpio_keys_swnodes);
+	platform_device_register_full(&h3xxx_gpio_keys_dev_info);
 }
 
 static struct map_desc h3600_io_desc[] __initdata = {

-- 
2.55.0.rc2.803.g1fd1e6609c-goog



  parent reply	other threads:[~2026-07-07  3:14 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-07-07  3:13 [PATCH 0/4] ARM: sa1100: convert gpio-keys to software nodes Dmitry Torokhov
2026-07-07  3:14 ` [PATCH 1/4] gpio: sa1100: register software node for GPIO controller Dmitry Torokhov
2026-07-07  3:14 ` [PATCH 2/4] ARM: sa1100: assabet: convert gpio-keys to use software nodes Dmitry Torokhov
2026-07-07  3:14 ` [PATCH 3/4] ARM: sa1100: collie: " Dmitry Torokhov
2026-07-07  3:14 ` Dmitry Torokhov [this message]
2026-07-07  8:08 ` [PATCH 0/4] ARM: sa1100: convert gpio-keys to " Bartosz Golaszewski
2026-07-07  8:14   ` Arnd Bergmann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260706-sa1100-swnode-v1-4-332759bbd930@gmail.com \
    --to=dmitry.torokhov@gmail.com \
    --cc=arnd@arndb.de \
    --cc=brgl@kernel.org \
    --cc=linusw@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=soc@lists.linux.dev \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox