[RFC PATCH v1 2/2] arm64: dts: rockchip: fix gadget hot-plug on ODROID-M1S micro-USB

[Andreas Zdziarstek <andreas.zdziarstek@gmail.com>]

Referencing the vcc5v0_usb2_otg switch as phy-supply of the OTG port
makes the phy core enable it as soon as the USB controller powers the
PHY, so the board permanently drives its own 5 V onto the micro-USB
connector's VBUS pin. That blinds the PHY's session detection: VBUSDET
(fed from connector VBUS through the on-board 10k/15k divider) is
always high, no bvalid edge can ever occur on plug or unplug, and the
OTG state machine never wakes from its initial state. A USB gadget
only enumerates if the cable is already attached at power-on. It also
back-drives 5 V against the host port.

The inno-usb2 driver has no role-managed VBUS supply support, and the
practical use of this port is as the board's USB device/download port.
Separate Type-A ports are available for host functions.

Drop the phy-supply so the port never sources VBUS and pin the
controller to dr_mode="peripheral" to match that.

Fixes: 10dc64fe0f98 ("arm64: dts: rockchip: Add Hardkernel ODROID-M1S")
Signed-off-by: Andreas Zdziarstek <andreas.zdziarstek@gmail.com>
---
 arch/arm64/boot/dts/rockchip/rk3566-odroid-m1s.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3566-odroid-m1s.dts b/arch/arm64/boot/dts/rockchip/rk3566-odroid-m1s.dts
index 33bc5249d729..d9d4a31373a0 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-odroid-m1s.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3566-odroid-m1s.dts
@@ -602,6 +602,7 @@ &usb_host0_ohci {
 };
 
 &usb_host0_xhci {
+	dr_mode = "peripheral";
 	status = "okay";
 };
 
@@ -627,7 +628,6 @@ &usb2phy0_host {
 };
 
 &usb2phy0_otg {
-	phy-supply = <&vcc5v0_usb2_otg>;
 	status = "okay";
 };
 
-- 
2.53.0