Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Chen-Yu Tsai <wenst@chromium.org>
To: Matthias Brugger <matthias.bgg@gmail.com>,
	AngeloGioacchino Del Regno
	<angelogioacchino.delregno@collabora.com>
Cc: Chen-Yu Tsai <wenst@chromium.org>,
	linux-mediatek@lists.infradead.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH] arm64: dts: mediatek: mt8188-geralt: Add MT6319 PMIC
Date: Tue,  7 Jul 2026 18:44:25 +0800	[thread overview]
Message-ID: <20260707104427.3409290-1-wenst@chromium.org> (raw)

The Geralt design uses a MT6319 PMIC to power the big cores and LPDDR4X
DRAM.

Add a device node for it and hook up all the supplies.

This change requires a firmware fix for the SPMI bus to read back
correctly. The required firmware version is 15842.175.0. This is
included in ChromeOS releases R150-16700.22.0 (available in Beta
channel as of writing or stable channel in mid-July) or
R151-16721.0.0 and later.

Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
---
 .../boot/dts/mediatek/mt8188-geralt.dtsi      | 66 +++++++++++++++++++
 1 file changed, 66 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8188-geralt.dtsi b/arch/arm64/boot/dts/mediatek/mt8188-geralt.dtsi
index f382f90c48f5..fea52c377d88 100644
--- a/arch/arm64/boot/dts/mediatek/mt8188-geralt.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8188-geralt.dtsi
@@ -4,6 +4,8 @@
  */
 /dts-v1/;
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/spmi/spmi.h>
+
 #include "mt8188.dtsi"
 #include "mt6359.dtsi"
 
@@ -241,6 +243,14 @@ &cpu5 {
 	cpu-supply = <&mt6359_vcore_buck_reg>;
 };
 
+&cpu6 {
+	cpu-supply = <&mt6319_buck1>;
+};
+
+&cpu7 {
+	cpu-supply = <&mt6319_buck1>;
+};
+
 /*
  * Geralt is the reference design and doesn't have target TDP.
  * Ciri is (currently) the only device following Geralt, and its
@@ -1156,6 +1166,14 @@ pins-bus {
 		};
 	};
 
+	spmi_pins: spmi-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO175__FUNC_B0_SPMI_M_SCL>,
+				 <PINMUX_GPIO176__FUNC_B0_SPMI_M_SDA>;
+			bias-disable;
+		};
+	};
+
 	uart0_pins: uart0-pins {
 		pins-bus {
 			pinmux = <PINMUX_GPIO31__FUNC_O_UTXD0>,
@@ -1267,6 +1285,54 @@ &spi2 {
 	status = "okay";
 };
 
+&spmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spmi_pins>;
+	#address-cells = <2>;
+	#size-cells = <0>;
+	status = "okay";
+
+	pmic@6 {
+		compatible = "mediatek,mt6319-regulator", "mediatek,mt6315-regulator";
+		reg = <0x6 SPMI_USID>;
+		pvdd1-supply = <&pp4200_s5>;
+		pvdd2-supply = <&pp4200_s5>;
+		pvdd3-supply = <&pp4200_s5>;
+		pvdd4-supply = <&pp4200_s5>;
+
+		regulators {
+			mt6319_buck1: vbuck1 {
+					regulator-name = "ppvar_dvdd_proc_bc";
+					regulator-min-microvolt = <520000>;
+					regulator-max-microvolt = <1155000>;
+					regulator-enable-ramp-delay = <256>;
+					regulator-allowed-modes = <0 1 2>;
+					regulator-always-on;
+			};
+
+			/* vbuck2 is ganged with vbuck1 */
+
+			mt6319_buck3: vbuck3 {
+					regulator-name = "pp1125_emi_vdd2";
+					regulator-min-microvolt = <1060000>;
+					regulator-max-microvolt = <1170000>;
+					regulator-enable-ramp-delay = <256>;
+					regulator-allowed-modes = <0 1 2>;
+					regulator-always-on;
+			};
+
+			mt6319_buck4: vbuck4 {
+					regulator-name = "pp0600_emi_vddq";
+					regulator-min-microvolt = <570000>;
+					regulator-max-microvolt = <650000>;
+					regulator-enable-ramp-delay = <256>;
+					regulator-allowed-modes = <0 1 2>;
+					regulator-always-on;
+			};
+		};
+	};
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pins>;
-- 
2.55.0.rc2.803.g1fd1e6609c-goog



             reply	other threads:[~2026-07-07 10:44 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-07-07 10:44 Chen-Yu Tsai [this message]
2026-07-07 11:05 ` [PATCH] arm64: dts: mediatek: mt8188-geralt: Add MT6319 PMIC AngeloGioacchino Del Regno
2026-07-07 11:08   ` Chen-Yu Tsai
2026-07-07 11:24     ` AngeloGioacchino Del Regno
2026-07-08  4:25       ` Chen-Yu Tsai
2026-07-08  8:02         ` AngeloGioacchino Del Regno
2026-07-08  8:15           ` Chen-Yu Tsai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260707104427.3409290-1-wenst@chromium.org \
    --to=wenst@chromium.org \
    --cc=angelogioacchino.delregno@collabora.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=matthias.bgg@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox