[PATCH v4 07/14] usb: hub: Pass |struct usb_port*| to usb_port_is_power_on()

[Chen-Yu Tsai <wenst@chromium.org>]

usb_port_is_power_on() currently takes |struct usb_hub*|, but only needs
it to tell if the hub/port is SuperSpeed or not.

In a subsequent change, usb_port_is_power_on() needs access to a pwrseq
state tracking field in |struct usb_port|. Either structure can be used
to identify whether a port/hub is SuperSpeed or not, as the field in
|struct usb_port| is inherited from the hub:

    port->is_superspeed = hub_is_superspeed(hub)

Replace usb_port_is_power_on()'s |struct usb_hub*| parameter with
|struct usb_port*| so a subsequent change can use it.

Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
---
Changes since v3:
- Adapted to move of usb_port_is_power_on() to port.c and port.h
---
 drivers/usb/core/hub.c  | 7 ++++---
 drivers/usb/core/port.c | 6 +++---
 drivers/usb/core/port.h | 4 +---
 3 files changed, 8 insertions(+), 9 deletions(-)

diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 6f576efa37b1..c7fa73673582 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -3290,7 +3290,7 @@ static int check_port_resume_type(struct usb_device *udev,
 	}
 	/* Is the device still present? */
 	else if (status || port_is_suspended(hub, portstatus) ||
-			!usb_port_is_power_on(hub, portstatus)) {
+			!usb_port_is_power_on(port_dev, portstatus)) {
 		if (status >= 0)
 			status = -ENODEV;
 	} else if (!(portstatus & USB_PORT_STAT_CONNECTION)) {
@@ -3732,12 +3732,13 @@ static int wait_for_connected(struct usb_device *udev,
 		struct usb_hub *hub, int port1,
 		u16 *portchange, u16 *portstatus)
 {
+	struct usb_port *port_dev = hub->ports[port1 - 1];
 	int status = 0, delay_ms = 0;
 
 	while (delay_ms < 2000) {
 		if (status || *portstatus & USB_PORT_STAT_CONNECTION)
 			break;
-		if (!usb_port_is_power_on(hub, *portstatus)) {
+		if (!usb_port_is_power_on(port_dev, *portstatus)) {
 			status = -ENODEV;
 			break;
 		}
@@ -5433,7 +5434,7 @@ static void hub_port_connect(struct usb_hub *hub, int port1, u16 portstatus,
 		 * but only if the port isn't owned by someone else.
 		 */
 		if (hub_is_port_power_switchable(hub)
-				&& !usb_port_is_power_on(hub, portstatus)
+				&& !usb_port_is_power_on(port_dev, portstatus)
 				&& !port_dev->port_owner)
 			set_port_feature(hdev, port1, USB_PORT_FEAT_POWER);
 
diff --git a/drivers/usb/core/port.c b/drivers/usb/core/port.c
index 206b9f9a5807..f3e4d6a31798 100644
--- a/drivers/usb/core/port.c
+++ b/drivers/usb/core/port.c
@@ -23,11 +23,11 @@ static int usb_port_block_power_off;
 static const struct attribute_group *port_dev_group[];
 
 /* Check if a port is power on */
-int usb_port_is_power_on(struct usb_hub *hub, unsigned int portstatus)
+int usb_port_is_power_on(struct usb_port *port, unsigned int portstatus)
 {
 	int ret = 0;
 
-	if (hub_is_superspeed(hub->hdev)) {
+	if (port->is_superspeed) {
 		if (portstatus & USB_SS_PORT_STAT_POWER)
 			ret = 1;
 	} else {
@@ -114,7 +114,7 @@ static ssize_t disable_show(struct device *dev,
 	}
 
 	usb_hub_port_status(hub, port1, &portstatus, &unused);
-	disabled = !usb_port_is_power_on(hub, portstatus);
+	disabled = !usb_port_is_power_on(port_dev, portstatus);
 
  out_hdev_lock:
 	usb_unlock_device(hdev);
diff --git a/drivers/usb/core/port.h b/drivers/usb/core/port.h
index f43f6b3b6b1f..22f9973638d7 100644
--- a/drivers/usb/core/port.h
+++ b/drivers/usb/core/port.h
@@ -63,6 +63,4 @@ struct usb_port {
 #define to_usb_port(_dev) \
 	container_of(_dev, struct usb_port, dev)
 
-struct usb_hub;
-
-extern int usb_port_is_power_on(struct usb_hub *hub, unsigned int portstatus);
+extern int usb_port_is_power_on(struct usb_port *port, unsigned int portstatus);
-- 
2.55.0.795.g602f6c329a-goog