[PATCH v6 5/5] arm64: dts: qcom: glymur: use Aggregator TNOC compatible

[Jie Gan <jie.gan@oss.qualcomm.com>]

The traceNoC node is the system-level Aggregator TNOC, so it must own a
valid ATID that tags the whole aggregation path. It was marked compatible
with "qcom,coresight-itnoc", an Interconnect TNOC, which is never assigned
an ATID. As a result the aggregator had no trace ID and could not tag the
merged trace.

An Interconnect TNOC is a subsystem-level aggregator: it merges trace from
the ATB sources within its subsystem (TPDMs and other ATB masters) and
forwards the combined stream to the system-level Aggregator TNOC. It
carries no ATID of its own, because the Aggregator TNOC downstream in the
path already owns the ATID.

Switch the node to "qcom,coresight-tnoc" so it is described as the
Aggregator TNOC it is and is assigned a system trace ID. Rename the node
to "tn" and use the "apb_pclk" clock name as required by the Aggregator
TNOC binding.

Fixes: 1f7d0c42a08d ("arm64: dts: qcom: glymur: add coresight nodes")
Signed-off-by: Jie Gan <jie.gan@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/glymur.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/glymur.dtsi b/arch/arm64/boot/dts/qcom/glymur.dtsi
index 20b49af7298e..0c04dca5e557 100644
--- a/arch/arm64/boot/dts/qcom/glymur.dtsi
+++ b/arch/arm64/boot/dts/qcom/glymur.dtsi
@@ -6038,12 +6038,12 @@ qm_tpdm_out: endpoint {
 			};
 		};
 
-		itnoc@11200000  {
-			compatible = "qcom,coresight-itnoc";
+		tn@11200000 {
+			compatible = "qcom,coresight-tnoc";
 			reg = <0x0 0x11200000 0x0 0x3c00>;
 
 			clocks = <&aoss_qmp>;
-			clock-names = "apb";
+			clock-names = "apb_pclk";
 
 			in-ports {
 				#address-cells = <1>;

-- 
2.34.1