From: Sudeep Holla <sudeep.holla@kernel.org>
To: arm-scmi@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Cc: Cristian Marussi <cristian.marussi@arm.com>
Subject: [PATCH v6 03/16] firmware: arm_scmi: Quiesce notifications before teardown
Date: Tue, 14 Jul 2026 13:56:22 +0100 [thread overview]
Message-ID: <20260714-scmi_core_fixes-v6-3-3afe499d46e3@kernel.org> (raw)
In-Reply-To: <20260714-scmi_core_fixes-v6-0-3afe499d46e3@kernel.org>
scmi_notification_exit() clears and releases the notification instance,
but transport callbacks can still deliver incoming notifications until
the TX/RX channels are freed. During remove, an RX interrupt in that
window can enter scmi_notify() while notification state is being torn
down and then dereference freed memory. The same ordering exists on the
probe error path after notification initialization.
The notification late-init worker has a separate lifetime issue: protocol
event registration queues ni->init_work on the system workqueue, so
destroying ni->notify_wq does not drain that work. If the devres group is
released while init_work is still pending or running, the late-init worker
can dereference the freed notification instance.
Quiesce the notification core before TX/RX channels are torn down, then
clean up the channels before releasing the notification core resources.
Use disable_work_sync() so future late-init queueing is rejected and any
already queued or running late-init work has completed before channel
teardown starts.
Fixes: 1e7cbfaa66d3 ("firmware: arm_scmi: Free mailbox channels if probe fails")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Signed-off-by: Sudeep Holla <sudeep.holla@kernel.org>
---
drivers/firmware/arm_scmi/driver.c | 13 +++++++------
drivers/firmware/arm_scmi/notify.c | 21 +++++++++++++++++++++
drivers/firmware/arm_scmi/notify.h | 1 +
3 files changed, 29 insertions(+), 6 deletions(-)
diff --git a/drivers/firmware/arm_scmi/driver.c b/drivers/firmware/arm_scmi/driver.c
index 52aff3aded4c..ec373595f955 100644
--- a/drivers/firmware/arm_scmi/driver.c
+++ b/drivers/firmware/arm_scmi/driver.c
@@ -3325,7 +3325,7 @@ static int scmi_probe(struct platform_device *pdev)
dev_err(dev, "%s", err_str);
return 0;
}
- goto notification_exit;
+ goto raw_mode_cleanup;
}
mutex_lock(&scmi_list_mutex);
@@ -3367,17 +3367,18 @@ static int scmi_probe(struct platform_device *pdev)
return 0;
-notification_exit:
+raw_mode_cleanup:
if (IS_ENABLED(CONFIG_ARM_SCMI_RAW_MODE_SUPPORT))
scmi_raw_mode_cleanup(info->raw);
- scmi_notification_exit(&info->handle);
clear_dev_req_notifier:
blocking_notifier_chain_unregister(&scmi_requested_devices_nh,
&info->dev_req_nb);
clear_bus_notifier:
bus_unregister_notifier(&scmi_bus_type, &info->bus_nb);
clear_txrx_setup:
+ scmi_notification_quiesce(&info->handle);
scmi_cleanup_txrx_channels(info);
+ scmi_notification_exit(&info->handle);
clear_ida:
ida_free(&scmi_id, info->id);
@@ -3404,6 +3405,9 @@ static void scmi_remove(struct platform_device *pdev)
blocking_notifier_chain_unregister(&scmi_requested_devices_nh,
&info->dev_req_nb);
+ /* Stop transport callbacks before tearing down notifications. */
+ scmi_notification_quiesce(&info->handle);
+ scmi_cleanup_txrx_channels(info);
scmi_notification_exit(&info->handle);
mutex_lock(&info->protocols_mtx);
@@ -3416,9 +3420,6 @@ static void scmi_remove(struct platform_device *pdev)
bus_unregister_notifier(&scmi_bus_type, &info->bus_nb);
- /* Safe to free channels since no more users */
- scmi_cleanup_txrx_channels(info);
-
ida_free(&scmi_id, info->id);
}
diff --git a/drivers/firmware/arm_scmi/notify.c b/drivers/firmware/arm_scmi/notify.c
index 40ec184eedae..3239c28d6fa9 100644
--- a/drivers/firmware/arm_scmi/notify.c
+++ b/drivers/firmware/arm_scmi/notify.c
@@ -1706,6 +1706,25 @@ int scmi_notification_init(struct scmi_handle *handle)
return -ENOMEM;
}
+/**
+ * scmi_notification_quiesce() - Stop notification late initialization
+ * @handle: The handle identifying the platform instance to quiesce
+ *
+ * Prevent new late-init work from being queued and wait for any already queued
+ * or running late-init work to complete before transport channels are torn
+ * down.
+ */
+void scmi_notification_quiesce(struct scmi_handle *handle)
+{
+ struct scmi_notify_instance *ni;
+
+ ni = scmi_notification_instance_data_get(handle);
+ if (!ni)
+ return;
+
+ disable_work_sync(&ni->init_work);
+}
+
/**
* scmi_notification_exit() - Shutdown and clean Notification core
* @handle: The handle identifying the platform instance to shutdown
@@ -1717,6 +1736,8 @@ void scmi_notification_exit(struct scmi_handle *handle)
ni = scmi_notification_instance_data_get(handle);
if (!ni)
return;
+
+ scmi_notification_quiesce(handle);
scmi_notification_instance_data_set(handle, NULL);
/* Destroy while letting pending work complete */
diff --git a/drivers/firmware/arm_scmi/notify.h b/drivers/firmware/arm_scmi/notify.h
index 76758a736cf4..f18f98c5ab3b 100644
--- a/drivers/firmware/arm_scmi/notify.h
+++ b/drivers/firmware/arm_scmi/notify.h
@@ -82,6 +82,7 @@ struct scmi_protocol_events {
};
int scmi_notification_init(struct scmi_handle *handle);
+void scmi_notification_quiesce(struct scmi_handle *handle);
void scmi_notification_exit(struct scmi_handle *handle);
int scmi_register_protocol_events(const struct scmi_handle *handle, u8 proto_id,
const struct scmi_protocol_handle *ph,
--
2.43.0
next prev parent reply other threads:[~2026-07-14 12:58 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-14 12:56 [PATCH v6 00/16] firmware: arm_scmi: Fix SCMI core cleanup paths Sudeep Holla
2026-07-14 12:56 ` [PATCH v6 01/16] firmware: arm_scmi: Publish channel state before callbacks Sudeep Holla
2026-07-14 12:56 ` [PATCH v6 02/16] firmware: arm_scmi: Unregister device notifier before IDR teardown Sudeep Holla
2026-07-14 12:56 ` Sudeep Holla [this message]
2026-07-14 12:56 ` [PATCH v6 04/16] firmware: arm_scmi: Clean up channels on setup failure Sudeep Holla
2026-07-14 12:56 ` [PATCH v6 05/16] firmware: arm_scmi: Free transport channel on IDR failure Sudeep Holla
2026-07-14 12:56 ` [PATCH v6 06/16] firmware: arm_scmi: Avoid IDR updates while cleaning channels Sudeep Holla
2026-07-14 12:56 ` [PATCH v6 07/16] firmware: arm_scmi: Reject out of range DT protocol IDs Sudeep Holla
2026-07-14 12:56 ` [PATCH v6 08/16] firmware: arm_scmi: Use channel ID for transport teardown Sudeep Holla
2026-07-14 12:56 ` [PATCH v6 09/16] firmware: arm_scmi: Protect device request lookup with RCU Sudeep Holla
2026-07-14 12:56 ` [PATCH v6 10/16] firmware: arm_scmi: Drop handle on protocol bind failures Sudeep Holla
2026-07-14 12:56 ` [PATCH v6 11/16] firmware: arm_scmi: Clear SystemPower flag on create failure Sudeep Holla
2026-07-14 12:56 ` [PATCH v6 12/16] firmware: arm_scmi: Fix OF node reference handling Sudeep Holla
2026-07-14 12:56 ` [PATCH v6 13/16] firmware: arm_scmi: Unwind TX receiver mailbox setup failure Sudeep Holla
2026-07-14 12:56 ` [PATCH v6 14/16] firmware: arm_scmi: Unwind P2A " Sudeep Holla
2026-07-14 12:56 ` [PATCH v6 15/16] firmware: arm_scmi: Fix SCMI device destroy lifetimes Sudeep Holla
2026-07-14 12:56 ` [PATCH v6 16/16] firmware: arm_scmi: Fix transport device teardown lookup Sudeep Holla
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260714-scmi_core_fixes-v6-3-3afe499d46e3@kernel.org \
--to=sudeep.holla@kernel.org \
--cc=arm-scmi@vger.kernel.org \
--cc=cristian.marussi@arm.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox