Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Mostafa Saleh <smostafa@google.com>
To: linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org,  kvmarm@lists.linux.dev,
	iommu@lists.linux.dev
Cc: catalin.marinas@arm.com, will@kernel.org, maz@kernel.org,
	 oliver.upton@linux.dev, joey.gouly@arm.com,
	suzuki.poulose@arm.com,  yuzenghui@huawei.com, joro@8bytes.org,
	jgg@ziepe.ca, mark.rutland@arm.com,  qperret@google.com,
	tabba@google.com, vdonnefort@google.com,
	 sebastianene@google.com, keirf@google.com,
	 Mostafa Saleh <smostafa@google.com>
Subject: [PATCH v7 19/24] iommu/arm-smmu-v3-kvm: Share other queues
Date: Wed, 15 Jul 2026 11:59:00 +0000	[thread overview]
Message-ID: <20260715115906.2664882-20-smostafa@google.com> (raw)
In-Reply-To: <20260715115906.2664882-1-smostafa@google.com>

Other queues as PRIQ and EVTQ doesn't need to be shadowed. However, we
need to make sure they are in a state that disallow them to be donated
to the hypervisor or guests. So, keep track of those and share them when
they get enabled.

Signed-off-by: Mostafa Saleh <smostafa@google.com>
---
 .../iommu/arm/arm-smmu-v3/pkvm/arm-smmu-v3.c  | 78 +++++++++++++++++--
 .../iommu/arm/arm-smmu-v3/pkvm/arm_smmu_v3.h  |  8 ++
 2 files changed, 81 insertions(+), 5 deletions(-)

diff --git a/drivers/iommu/arm/arm-smmu-v3/pkvm/arm-smmu-v3.c b/drivers/iommu/arm/arm-smmu-v3/pkvm/arm-smmu-v3.c
index fba3b3e15780..11de73640a6f 100644
--- a/drivers/iommu/arm/arm-smmu-v3/pkvm/arm-smmu-v3.c
+++ b/drivers/iommu/arm/arm-smmu-v3/pkvm/arm-smmu-v3.c
@@ -74,6 +74,16 @@ static bool is_smmu_enabled(struct hyp_arm_smmu_v3_device *smmu)
 	return FIELD_GET(CR0_SMMUEN, smmu->cr0);
 }
 
+static bool is_evtq_enabled(struct hyp_arm_smmu_v3_device *smmu)
+{
+	return FIELD_GET(CR0_EVTQEN, smmu->cr0);
+}
+
+static bool is_priq_enabled(struct hyp_arm_smmu_v3_device *smmu)
+{
+	return FIELD_GET(CR0_PRIQEN, smmu->cr0);
+}
+
 /*
  * CMDQ, STE host copies are accessed by the hypervisor, we share them to
  * - Prevent the host from passing protected VM memory.
@@ -647,6 +657,18 @@ static void smmu_emulate_cmdq_disable(struct hyp_arm_smmu_v3_device *smmu)
 				   cmdq_size(&smmu->cmdq_host)));
 }
 
+static void smmu_emulate_queue(struct hyp_arm_smmu_v3_device *smmu,
+			       unsigned long q_base, size_t ent_size_shift)
+{
+	/* Q_BASE_ADDR_MASK is not enough as the SMMU also ignores bits > OAS */
+	phys_addr_t base = q_base & Q_BASE_ADDR_MASK & ((1ULL << smmu->oas) - 1);
+	size_t size = 1UL << (FIELD_GET(Q_BASE_LOG2SIZE, q_base) + ent_size_shift);
+
+	/* Queues are aligned to the size also. */
+	base &= ~(size - 1);
+	WARN_ON(smmu_share_pages(base, size));
+}
+
 static bool smmu_dabt_device(struct hyp_arm_smmu_v3_device *smmu,
 			     struct user_pt_regs *regs,
 			     u64 esr, u32 off)
@@ -751,12 +773,34 @@ static bool smmu_dabt_device(struct hyp_arm_smmu_v3_device *smmu,
 		if (is_write) {
 			bool last_cmdq_en = is_cmdq_enabled(smmu);
 			bool last_smmu_en = is_smmu_enabled(smmu);
+			bool last_evtq_en = is_evtq_enabled(smmu);
+			bool last_priq_en = is_priq_enabled(smmu);
 
 			smmu->cr0 = val;
 			if (!last_cmdq_en && is_cmdq_enabled(smmu))
 				smmu_emulate_cmdq_enable(smmu);
 			else if (last_cmdq_en && !is_cmdq_enabled(smmu))
 				smmu_emulate_cmdq_disable(smmu);
+
+			/*
+			 * Share PRI and EVTQ to avoid the host using them to write to
+			 * protected memory. However, do not unshare the queues at disable
+			 * as that is more complicated, unsharing from here can lead to
+			 * use-after-unshare issues, and requires ordering with cr0ack.
+			 * The host can disable those queue during shutdown, but it nevers
+			 * changes the base address (even with RPM), so leave the queue
+			 * shared and assert that multiple host writes does not change it.
+			 */
+			if (!last_evtq_en && is_evtq_enabled(smmu) && !smmu->evtq_shared) {
+				smmu_emulate_queue(smmu, smmu->evtq_base, EVTQ_ENT_SZ_SHIFT);
+				smmu->evtq_shared = true;
+			}
+
+			if (!last_priq_en && is_priq_enabled(smmu) && !smmu->priq_shared) {
+				smmu_emulate_queue(smmu, smmu->priq_base, PRIQ_ENT_SZ_SHIFT);
+				smmu->priq_shared = true;
+			}
+
 			if (!last_smmu_en && is_smmu_enabled(smmu))
 				smmu_emulate_enable(smmu);
 			else if (last_smmu_en && !is_smmu_enabled(smmu))
@@ -780,6 +824,33 @@ static bool smmu_dabt_device(struct hyp_arm_smmu_v3_device *smmu,
 		mask = read_write;
 		break;
 	}
+	case ARM_SMMU_EVTQ_BASE:
+		if (len != sizeof(u64))
+			break;
+
+		if (is_write) {
+			/* See ARM_SMMU_CR0 */
+			if (is_evtq_enabled(smmu) ||
+			    (smmu->evtq_shared && (smmu->evtq_base != val)))
+				break;
+			smmu->evtq_base = val;
+		}
+		mask = read_write;
+		break;
+
+	case ARM_SMMU_PRIQ_BASE:
+		if (len != sizeof(u64))
+			break;
+
+		if (is_write) {
+			/* See ARM_SMMU_CR0 */
+			if (is_priq_enabled(smmu) ||
+			    (smmu->priq_shared && (smmu->priq_base != val)))
+				break;
+			smmu->priq_base = val;
+		}
+		mask = read_write;
+		break;
 
 	/* Allowed 32 bit registers. */
 	case ARM_SMMU_EVTQ_IRQ_CFG1:
@@ -810,15 +881,12 @@ static bool smmu_dabt_device(struct hyp_arm_smmu_v3_device *smmu,
 	case ARM_SMMU_EVTQ_IRQ_CFG0:
 	case ARM_SMMU_PRIQ_IRQ_CFG0:
 	case ARM_SMMU_GERROR_IRQ_CFG0:
+		if (len != sizeof(u64))
+			break;
 		/* These are RES0 as MSI support is hidden. */
 		val = 0;
 		if (!is_write)
 			goto out_update_regs;
-		fallthrough;
-	case ARM_SMMU_EVTQ_BASE:
-	case ARM_SMMU_PRIQ_BASE:
-		if (len != sizeof(u64))
-			break;
 		mask = read_write;
 		break;
 	/* Allowed RO 32 bit registers. */
diff --git a/drivers/iommu/arm/arm-smmu-v3/pkvm/arm_smmu_v3.h b/drivers/iommu/arm/arm-smmu-v3/pkvm/arm_smmu_v3.h
index 085aead009b6..d96801e433ef 100644
--- a/drivers/iommu/arm/arm-smmu-v3/pkvm/arm_smmu_v3.h
+++ b/drivers/iommu/arm/arm-smmu-v3/pkvm/arm_smmu_v3.h
@@ -32,6 +32,10 @@
  * @host_ste_cfg	Host stream table config
  * @host_ste_base	Host stream table base
  * @strtab_cfg		Stream table as seen by HW
+ * @evtq_base		Host evtq base reg
+ * @priq_base		Host priq base reg
+ * @evtq_shared		Whether the EVTQ was setup
+ * @priq_shared		Whether the PRIQ was setup
  */
 struct hyp_arm_smmu_v3_device {
 	phys_addr_t		mmio_addr;
@@ -56,6 +60,10 @@ struct hyp_arm_smmu_v3_device {
 	u64			host_ste_cfg;
 	u64			host_ste_base;
 	struct arm_smmu_strtab_cfg strtab_cfg;
+	unsigned long		evtq_base;
+	unsigned long		priq_base;
+	bool				evtq_shared;
+	bool				priq_shared;
 };
 
 extern size_t kvm_nvhe_sym(kvm_hyp_arm_smmu_v3_count);
-- 
2.55.0.141.g00534a21ce-goog



  parent reply	other threads:[~2026-07-15 12:00 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-07-15 11:58 [PATCH v7 00/24] KVM: arm64: SMMUv3 driver for pKVM (trap and emulate) Mostafa Saleh
2026-07-15 11:58 ` [PATCH v7 01/24] KVM: arm64: Add a generic clock Mostafa Saleh
2026-07-15 13:48   ` Vincent Donnefort
2026-07-15 14:13     ` Mostafa Saleh
2026-07-15 14:34       ` Vincent Donnefort
2026-07-15 11:58 ` [PATCH v7 02/24] KVM: arm64: Donate MMIO to the hypervisor Mostafa Saleh
2026-07-15 17:26   ` Vincent Donnefort
2026-07-15 18:28     ` Mostafa Saleh
2026-07-15 11:58 ` [PATCH v7 03/24] iommu/arm-smmu-v3: Split code with hyp Mostafa Saleh
2026-07-15 11:58 ` [PATCH v7 04/24] iommu/arm-smmu-v3: Move TLB range invalidation into common code Mostafa Saleh
2026-07-15 11:58 ` [PATCH v7 05/24] iommu/arm-smmu-v3: Move IDR parsing to common functions Mostafa Saleh
2026-07-15 11:58 ` [PATCH v7 06/24] KVM: arm64: iommu: Introduce IOMMU driver infrastructure Mostafa Saleh
2026-07-15 11:58 ` [PATCH v7 07/24] KVM: arm64: iommu: Shadow host stage-2 page table Mostafa Saleh
2026-07-15 17:56   ` Vincent Donnefort
2026-07-15 18:43     ` Mostafa Saleh
2026-07-15 11:58 ` [PATCH v7 08/24] KVM: arm64: iommu: Add memory pool Mostafa Saleh
2026-07-15 11:58 ` [PATCH v7 09/24] KVM: arm64: iommu: Support DABT for IOMMU Mostafa Saleh
2026-07-15 11:58 ` [PATCH v7 10/24] iommu/arm-smmu-v3-kvm: Add SMMUv3 driver Mostafa Saleh
2026-07-15 11:58 ` [PATCH v7 11/24] iommu/arm-smmu-v3-kvm: Add the kernel driver Mostafa Saleh
2026-07-15 11:58 ` [PATCH v7 12/24] iommu/arm-smmu-v3-kvm: Probe SMMU HW Mostafa Saleh
2026-07-15 11:58 ` [PATCH v7 13/24] iommu/arm-smmu-v3-kvm: Add MMIO emulation Mostafa Saleh
2026-07-15 11:58 ` [PATCH v7 14/24] iommu/arm-smmu-v3-kvm: Shadow the command queue Mostafa Saleh
2026-07-15 11:58 ` [PATCH v7 15/24] iommu/arm-smmu-v3-kvm: Add CMDQ functions Mostafa Saleh
2026-07-15 11:58 ` [PATCH v7 16/24] iommu/arm-smmu-v3-kvm: Emulate CMDQ for host Mostafa Saleh
2026-07-15 11:58 ` [PATCH v7 17/24] iommu/arm-smmu-v3-kvm: Shadow stream table Mostafa Saleh
2026-07-15 11:58 ` [PATCH v7 18/24] iommu/arm-smmu-v3-kvm: Shadow STEs Mostafa Saleh
2026-07-15 11:59 ` Mostafa Saleh [this message]
2026-07-15 11:59 ` [PATCH v7 20/24] iommu/arm-smmu-v3-kvm: Emulate GBPA Mostafa Saleh
2026-07-15 11:59 ` [PATCH v7 21/24] iommu/io-pgtable-arm: Support io-pgtable-arm in the hypervisor Mostafa Saleh
2026-07-15 11:59 ` [PATCH v7 22/24] iommu/arm-smmu-v3-kvm: Shadow the CPU stage-2 page table Mostafa Saleh
2026-07-15 11:59 ` [PATCH v7 23/24] iommu/arm-smmu-v3-kvm: Enable nesting Mostafa Saleh
2026-07-15 11:59 ` [PATCH v7 24/24] KVM: arm64: Add documentation for pKVM DMA isolation Mostafa Saleh

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260715115906.2664882-20-smostafa@google.com \
    --to=smostafa@google.com \
    --cc=catalin.marinas@arm.com \
    --cc=iommu@lists.linux.dev \
    --cc=jgg@ziepe.ca \
    --cc=joey.gouly@arm.com \
    --cc=joro@8bytes.org \
    --cc=keirf@google.com \
    --cc=kvmarm@lists.linux.dev \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=maz@kernel.org \
    --cc=oliver.upton@linux.dev \
    --cc=qperret@google.com \
    --cc=sebastianene@google.com \
    --cc=suzuki.poulose@arm.com \
    --cc=tabba@google.com \
    --cc=vdonnefort@google.com \
    --cc=will@kernel.org \
    --cc=yuzenghui@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox