[PATCH v1 5/7] MIPS: BCM63XX: Remove one time use ephy_reset_gpio_flags

[Andy Shevchenko <andriy.shevchenko@linux.intel.com>]

ephy_reset_gpio_flags exists solely to supply polarity to the reset GPIO.
But in practice it's kept all the same and currently only a single user
present. Drop the member and use hard coded GPIO flags instead.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 arch/mips/bcm63xx/boards/board_bcm963xx.c           | 7 +++----
 arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h | 3 ---
 2 files changed, 3 insertions(+), 7 deletions(-)

diff --git a/arch/mips/bcm63xx/boards/board_bcm963xx.c b/arch/mips/bcm63xx/boards/board_bcm963xx.c
index c5617b889b1c..57e916c06792 100644
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -42,7 +42,7 @@ static struct board_info __initdata board_cvg834g = {
 	.expected_cpu_id = 0x3368,
 
 	.ephy_reset_gpio = 36,
-	.ephy_reset_gpio_flags = GPIOF_OUT_INIT_HIGH,
+
 	.has_pci = 1,
 	.has_uart0 = 1,
 	.has_uart1 = 1,
@@ -903,9 +903,8 @@ int __init board_register_devices(void)
 
 	platform_device_register(&bcm63xx_gpio_leds);
 
-	if (board.ephy_reset_gpio && board.ephy_reset_gpio_flags)
-		gpio_request_one(board.ephy_reset_gpio,
-				board.ephy_reset_gpio_flags, "ephy-reset");
+	if (board.ephy_reset_gpio)
+		gpio_request_one(board.ephy_reset_gpio, GPIOF_OUT_INIT_HIGH, "ephy-reset");
 
 	return 0;
 }
diff --git a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
index 830f53f28e3f..018a56cbc328 100644
--- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
@@ -46,9 +46,6 @@ struct board_info {
 
 	/* External PHY reset GPIO */
 	unsigned int ephy_reset_gpio;
-
-	/* External PHY reset GPIO flags from gpio.h */
-	unsigned long ephy_reset_gpio_flags;
 };
 
 #endif /* ! BOARD_BCM963XX_H_ */
-- 
2.50.1