Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Jerome Brunet <jbrunet@baylibre.com>
To: Junhui Liu <junhui.liu@pigmoral.tech>,
	 Alexandre Belloni <alexandre.belloni@bootlin.com>,
	 Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	 Conor Dooley <conor+dt@kernel.org>,
	Chen-Yu Tsai <wens@kernel.org>,
	 Jernej Skrabec <jernej.skrabec@gmail.com>,
	 Samuel Holland <samuel@sholland.org>,
	 Michael Turquette <mturquette@baylibre.com>,
	 Stephen Boyd <sboyd@kernel.org>,
	Maxime Ripard <mripard@kernel.org>
Cc: linux-rtc@vger.kernel.org, devicetree@vger.kernel.org,
	 linux-arm-kernel@lists.infradead.org,
	linux-sunxi@lists.linux.dev,  linux-kernel@vger.kernel.org,
	linux-clk@vger.kernel.org,  Jerome Brunet <jbrunet@baylibre.com>
Subject: [PATCH v5 2/4] clk: sunxi-ng: div: add read-only operation support
Date: Fri, 17 Jul 2026 17:24:52 +0200	[thread overview]
Message-ID: <20260717-a733-rtc-v5-2-3874cc26abf7@baylibre.com> (raw)
In-Reply-To: <20260717-a733-rtc-v5-0-3874cc26abf7@baylibre.com>

Add support for sunxi-ng read-only dividers. This will be
useful to the a733 oscillator detection logic.

Reviewed-by: Chen-Yu Tsai <wens@kernel.org>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
 drivers/clk/sunxi-ng/ccu_div.c | 30 ++++++++++++++++++++++++++++--
 drivers/clk/sunxi-ng/ccu_div.h |  1 +
 drivers/clk/sunxi-ng/ccu_mux.c |  2 +-
 drivers/clk/sunxi-ng/ccu_mux.h |  4 ++++
 4 files changed, 34 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/sunxi-ng/ccu_div.c b/drivers/clk/sunxi-ng/ccu_div.c
index 62d680ccb524..93cb4cb93abe 100644
--- a/drivers/clk/sunxi-ng/ccu_div.c
+++ b/drivers/clk/sunxi-ng/ccu_div.c
@@ -20,8 +20,22 @@ static int ccu_div_determine_rate_helper(struct ccu_mux_internal *mux,
 	if (cd->common.features & CCU_FEATURE_FIXED_POSTDIV)
 		req->rate *= cd->fixed_post_div;
 
-	ret = divider_determine_rate(&cd->common.hw, req, cd->div.table,
-				     cd->div.width, cd->div.flags);
+	if (cd->div.flags & CLK_DIVIDER_READ_ONLY) {
+		unsigned long val;
+		u32 reg;
+
+		reg = readl(cd->common.base + cd->common.reg);
+		val = reg >> cd->div.shift;
+		val &= (1 << cd->div.width) - 1;
+
+		ret = divider_ro_determine_rate(&cd->common.hw, req, cd->div.table,
+						cd->div.width, cd->div.flags, val);
+
+	} else {
+		ret = divider_determine_rate(&cd->common.hw, req, cd->div.table,
+					     cd->div.width, cd->div.flags);
+	}
+
 	if (ret)
 		return ret;
 
@@ -143,3 +157,15 @@ const struct clk_ops ccu_div_ops = {
 	.set_rate	= ccu_div_set_rate,
 };
 EXPORT_SYMBOL_NS_GPL(ccu_div_ops, "SUNXI_CCU");
+
+const struct clk_ops ccu_rodiv_ops = {
+	.disable	= ccu_div_disable,
+	.enable		= ccu_div_enable,
+	.is_enabled	= ccu_div_is_enabled,
+
+	.get_parent	= ccu_div_get_parent,
+
+	.determine_rate	= ccu_div_determine_rate,
+	.recalc_rate	= ccu_div_recalc_rate,
+};
+EXPORT_SYMBOL_NS_GPL(ccu_rodiv_ops, "SUNXI_CCU");
diff --git a/drivers/clk/sunxi-ng/ccu_div.h b/drivers/clk/sunxi-ng/ccu_div.h
index be00b3277e97..a30a92780a05 100644
--- a/drivers/clk/sunxi-ng/ccu_div.h
+++ b/drivers/clk/sunxi-ng/ccu_div.h
@@ -300,5 +300,6 @@ static inline struct ccu_div *hw_to_ccu_div(struct clk_hw *hw)
 }
 
 extern const struct clk_ops ccu_div_ops;
+extern const struct clk_ops ccu_rodiv_ops;
 
 #endif /* _CCU_DIV_H_ */
diff --git a/drivers/clk/sunxi-ng/ccu_mux.c b/drivers/clk/sunxi-ng/ccu_mux.c
index 75ec3457324c..905570375711 100644
--- a/drivers/clk/sunxi-ng/ccu_mux.c
+++ b/drivers/clk/sunxi-ng/ccu_mux.c
@@ -67,7 +67,7 @@ unsigned long ccu_mux_helper_apply_prediv(struct ccu_common *common,
 	return parent_rate / ccu_mux_get_prediv(common, cm, parent_index);
 }
 
-static unsigned long ccu_mux_helper_unapply_prediv(struct ccu_common *common,
+unsigned long ccu_mux_helper_unapply_prediv(struct ccu_common *common,
 					    struct ccu_mux_internal *cm,
 					    int parent_index,
 					    unsigned long parent_rate)
diff --git a/drivers/clk/sunxi-ng/ccu_mux.h b/drivers/clk/sunxi-ng/ccu_mux.h
index c94a4bde5d01..272a2c36a8f2 100644
--- a/drivers/clk/sunxi-ng/ccu_mux.h
+++ b/drivers/clk/sunxi-ng/ccu_mux.h
@@ -134,6 +134,10 @@ unsigned long ccu_mux_helper_apply_prediv(struct ccu_common *common,
 					  struct ccu_mux_internal *cm,
 					  int parent_index,
 					  unsigned long parent_rate);
+unsigned long ccu_mux_helper_unapply_prediv(struct ccu_common *common,
+					    struct ccu_mux_internal *cm,
+					    int parent_index,
+					    unsigned long parent_rate);
 int ccu_mux_helper_determine_rate(struct ccu_common *common,
 				  struct ccu_mux_internal *cm,
 				  struct clk_rate_request *req,

-- 
2.47.3



  parent reply	other threads:[~2026-07-17 15:25 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-07-17 15:24 [PATCH v5 0/4] clk: sun6i-rtc: Add support for Allwinner A733 SoC Jerome Brunet
2026-07-17 15:24 ` [PATCH v5 1/4] clk: sunxi-ng: mux: fix determine helper rate propagation Jerome Brunet
2026-07-19 10:53   ` Chen-Yu Tsai
2026-07-17 15:24 ` Jerome Brunet [this message]
2026-07-17 15:24 ` [PATCH v5 3/4] clk: sunxi-ng: sun6i-rtc: split main oscillator div and gate Jerome Brunet
2026-07-17 15:24 ` [PATCH v5 4/4] clk: sunxi-ng: sun6i-rtc: add a733 support Jerome Brunet

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260717-a733-rtc-v5-2-3874cc26abf7@baylibre.com \
    --to=jbrunet@baylibre.com \
    --cc=alexandre.belloni@bootlin.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jernej.skrabec@gmail.com \
    --cc=junhui.liu@pigmoral.tech \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rtc@vger.kernel.org \
    --cc=linux-sunxi@lists.linux.dev \
    --cc=mripard@kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=robh@kernel.org \
    --cc=samuel@sholland.org \
    --cc=sboyd@kernel.org \
    --cc=wens@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox