[PATCH net-next v2 0/2] net: stmmac: dwmac-rk: refclk for crystal-less RGMII PHY

[Jiaxing Hu <gahing@gahingwoo.com>]

The ArmSoM CM5 has an on-module MotorComm YT8531 RGMII PHY with no
crystal. It takes its 25 MHz reference from the SoC (clk_mac_refout /
REFCLKO25M), but rk_gmac_clk_init() only requests that clock group for
RMII, so in RGMII the clock stayed off and the PHY did not answer on
MDIO.

Patch 2 requests the group whenever the SoC drives the clock
(clock_in_out = "output"). Patch 1 updates the binding, since RGMII with
clock_in_out = "output" is now valid.

Changes in v2:
- Add patch 1 documenting clock_in_out = "output" for RGMII in the
  rockchip-dwmac binding (Maxime Chevallier).

Jiaxing Hu (2):
  dt-bindings: net: rockchip-dwmac: allow output clock_in_out for RGMII
  net: stmmac: dwmac-rk: enable the reference clock for output mode

 Documentation/devicetree/bindings/net/rockchip-dwmac.yaml | 5 +++--
 drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c            | 4 ++--
 2 files changed, 5 insertions(+), 4 deletions(-)

-- 
2.43.0