From: Marcus Folkesson <marcus.folkesson@gmail.com>
To: Wolfram Sang <wsa+renesas@sang-engineering.com>,
Michael Hennerich <michael.hennerich@analog.com>,
Bartosz Golaszewski <brgl@bgdev.pl>,
Andi Shyti <andi.shyti@kernel.org>,
Andy Shevchenko <andriy.shevchenko@intel.com>,
Bartosz Golaszewski <brgl@kernel.org>,
Peter Rosin <peda@lysator.liu.se>,
Peter Rosin <peda@lysator.liu.se>
Cc: linux-i2c@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Marcus Folkesson <marcus.folkesson@gmail.com>
Subject: [PATCH v12 2/7] i2c: mux: add idle_state property to i2c_mux_core
Date: Sun, 19 Jul 2026 16:59:45 +0200 [thread overview]
Message-ID: <20260719-i2c-mux-v12-2-a5010d623a57@gmail.com> (raw)
In-Reply-To: <20260719-i2c-mux-v12-0-a5010d623a57@gmail.com>
Muxes treat their channels differently when idle.
Let the mux core have this information to make it available for
internal use.
Possible idle states are:
- I2C_MUX_IDLE_AS_IS: Leave channels as is when idle
- I2C_MUX_IDLE_DISCONNECT: Disconnect channel (set HiZ when idle)
- I2C_MUX_IDLE_UNKNOWN: Unknown idle state
- <n>: Enable channel n (starting from 0) when idle"
Default value is set to I2C_MUX_IDLE_UNKNOWN.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
---
drivers/i2c/i2c-mux.c | 1 +
include/linux/i2c-mux.h | 30 ++++++++++++++++++++++++++++++
2 files changed, 31 insertions(+)
diff --git a/drivers/i2c/i2c-mux.c b/drivers/i2c/i2c-mux.c
index 681a201c239b..b126ce7338c2 100644
--- a/drivers/i2c/i2c-mux.c
+++ b/drivers/i2c/i2c-mux.c
@@ -247,6 +247,7 @@ struct i2c_mux_core *i2c_mux_alloc(struct i2c_adapter *parent,
muxc->select = select;
muxc->deselect = deselect;
muxc->max_adapters = max_adapters;
+ muxc->idle_state = I2C_MUX_IDLE_UNKNOWN;
return muxc;
}
diff --git a/include/linux/i2c-mux.h b/include/linux/i2c-mux.h
index 1784ac7afb11..a348f81e7a90 100644
--- a/include/linux/i2c-mux.h
+++ b/include/linux/i2c-mux.h
@@ -15,6 +15,10 @@
#include <linux/bitops.h>
+#define I2C_MUX_IDLE_AS_IS (-1)
+#define I2C_MUX_IDLE_DISCONNECT (-2)
+#define I2C_MUX_IDLE_UNKNOWN (-3)
+
struct i2c_mux_core {
struct i2c_adapter *parent;
struct device *dev;
@@ -22,6 +26,18 @@ struct i2c_mux_core {
unsigned int arbitrator:1;
unsigned int gate:1;
+ /*
+ * The mux state used by the driver when idle.
+ * Possible idle states are:
+ * - I2C_MUX_IDLE_AS_IS: Leave channels as is when idle
+ * - I2C_MUX_IDLE_DISCONNECT: Disconnect channel (set HiZ when idle)
+ * - I2C_MUX_IDLE_UNKNOWN: Unknown idle state
+ * - <n>: Enable channel n (starting from 0) when idle"
+ *
+ * Default value is set to I2C_MUX_IDLE_UNKNOWN.
+ */
+ int idle_state;
+
void *priv;
int (*select)(struct i2c_mux_core *, u32 chan_id);
@@ -38,6 +54,20 @@ struct i2c_mux_core *i2c_mux_alloc(struct i2c_adapter *parent,
int (*select)(struct i2c_mux_core *, u32),
int (*deselect)(struct i2c_mux_core *, u32));
+/*
+ * Mux drivers may only change idle_state, and may only do so
+ * between allocation and registration of the mux controller.
+ */
+static inline void i2c_mux_set_idle_state(struct i2c_mux_core *muxc, int state)
+{
+ muxc->idle_state = state;
+}
+
+static inline int i2c_mux_idle_state(struct i2c_mux_core *muxc)
+{
+ return muxc->idle_state;
+}
+
/* flags for i2c_mux_alloc */
#define I2C_MUX_LOCKED BIT(0)
#define I2C_MUX_ARBITRATOR BIT(1)
--
2.54.0
next prev parent reply other threads:[~2026-07-19 15:17 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-19 14:59 [PATCH v12 0/7] I2C Mux per channel bus speed Marcus Folkesson
2026-07-19 14:59 ` [PATCH v12 1/7] i2c: core: add callback to change bus frequency Marcus Folkesson
2026-07-23 11:03 ` Peter Rosin
2026-07-23 11:36 ` Marcus Folkesson
2026-07-23 14:04 ` Peter Rosin
2026-07-19 14:59 ` Marcus Folkesson [this message]
2026-07-23 11:04 ` [PATCH v12 2/7] i2c: mux: add idle_state property to i2c_mux_core Peter Rosin
2026-07-24 6:24 ` Marcus Folkesson
2026-07-19 14:59 ` [PATCH v12 3/7] i2c: mux: add support for per channel bus frequency Marcus Folkesson
2026-07-23 11:05 ` Peter Rosin
2026-07-19 14:59 ` [PATCH v12 4/7] i2c: davinci: calculate bus freq from Hz instead of kHz Marcus Folkesson
2026-07-23 11:05 ` Peter Rosin
2026-07-19 14:59 ` [PATCH v12 5/7] i2c: davinci: add support for setting bus frequency Marcus Folkesson
2026-07-23 11:05 ` Peter Rosin
2026-07-19 14:59 ` [PATCH v12 6/7] i2c: mux: ltc4306: set correct idle_state in i2c_mux_core Marcus Folkesson
2026-07-23 11:05 ` Peter Rosin
2026-07-19 14:59 ` [PATCH v12 7/7] docs: i2c: i2c-topology: add section about bus speed Marcus Folkesson
2026-07-23 11:06 ` Peter Rosin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260719-i2c-mux-v12-2-a5010d623a57@gmail.com \
--to=marcus.folkesson@gmail.com \
--cc=andi.shyti@kernel.org \
--cc=andriy.shevchenko@intel.com \
--cc=brgl@bgdev.pl \
--cc=brgl@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=michael.hennerich@analog.com \
--cc=peda@lysator.liu.se \
--cc=wsa+renesas@sang-engineering.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox