From: Per Larsson <per@palvencia.se>
To: Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Chen-Yu Tsai <wens@kernel.org>,
Jernej Skrabec <jernej.skrabec@gmail.com>,
Samuel Holland <samuel@sholland.org>,
devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND
FLATTENED DEVICE TREE BINDINGS),
linux-arm-kernel@lists.infradead.org (moderated
list:ARM/Allwinner sunXi SoC support),
linux-sunxi@lists.linux.dev (open list:ARM/Allwinner sunXi SoC
support), linux-kernel@vger.kernel.org (open list)
Cc: Per Larsson <per@palvencia.se>
Subject: [PATCH 1/2] arm64: dts: allwinner: a523: Add missing SPDIF pin
Date: Mon, 20 Jul 2026 19:42:42 +0200 [thread overview]
Message-ID: <20260720174253.7686-1-per@palvencia.se> (raw)
When spdif support was added for the Allwinner A523 family of SoCs, only
two of the three possible pins were added to the dtsi, since the third
would clash with the first ethernet port (emac0)
However, some devices don't use emac0 and instead use emac1 for the only
available ethernet port, leaving the pin free to use for spdif.
Add the missing pin to the dtsi so such devices can (later) use it
Signed-off-by: Per Larsson <per@palvencia.se>
---
arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi b/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi
index ca6a16807049..7370e8ed24ec 100644
--- a/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi
@@ -216,6 +216,13 @@ spdif_out_pb_pin: spdif-pb-pin {
allwinner,pinmux = <2>;
};
+ /omit-if-no-ref/
+ spdif_out_ph_pin: spdif-ph-pin {
+ pins = "PH7";
+ function = "spdif";
+ allwinner,pinmux = <4>;
+ };
+
/omit-if-no-ref/
spdif_out_pi_pin: spdif-pi-pin {
pins = "PI10";
--
2.48.1
next reply other threads:[~2026-07-20 17:43 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-20 17:42 Per Larsson [this message]
2026-07-20 17:42 ` [PATCH 2/2] arm64: dts: allwinner: a523: Add SPDIF to x96qpro+ device Per Larsson
2026-07-20 20:24 ` [PATCH 1/2] arm64: dts: allwinner: a523: Add missing SPDIF pin Andre Przywara
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260720174253.7686-1-per@palvencia.se \
--to=per@palvencia.se \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jernej.skrabec@gmail.com \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@lists.linux.dev \
--cc=robh@kernel.org \
--cc=samuel@sholland.org \
--cc=wens@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox