[PATCH] ARM: dts: allwinner: a10: Fix PMU interrupt

[Andre Przywara <andre.przywara@arm.com>]

The Performance Monitoring Unit of the Cortex-A8 cores in the Allwinner
A10 SoC is connected to interrupt line 66, not 3. This is shown in the
manual (where interrupt 3 is assigned to UART2, also in our .dtsi), but
has also been confirmed by triggering an PMU overflow interrupt and
inspecting the IRQ controller status registers (from U-Boot).
Please note that "perf stat" does not use interrupts, this might explain
why this evaded the initial testing.

Fixes: 7e345d25c796 ("ARM: dts: sun4i-a10: Add PMU node")
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
---
 arch/arm/boot/dts/allwinner/sun4i-a10.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/allwinner/sun4i-a10.dtsi b/arch/arm/boot/dts/allwinner/sun4i-a10.dtsi
index 51a6464aab9a3..cabf619c2e217 100644
--- a/arch/arm/boot/dts/allwinner/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10.dtsi
@@ -185,7 +185,7 @@ de: display-engine {
 
 	pmu {
 		compatible = "arm,cortex-a8-pmu";
-		interrupts = <3>;
+		interrupts = <66>;
 	};
 
 	reserved-memory {
-- 
2.46.4