From: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
To: "Ivaylo Ivanov" <ivo.ivanov.ivanov1@gmail.com>,
"Rob Herring" <robh@kernel.org>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
"Conor Dooley" <conor+dt@kernel.org>,
"Peter Griffin" <peter.griffin@linaro.org>,
"Alim Akhtar" <alim.akhtar@samsung.com>,
"Sam Protsenko" <semen.protsenko@linaro.org>,
"André Draszik" <andre.draszik@linaro.org>,
"Tudor Ambarus" <tudor.ambarus@linaro.org>,
"Krzysztof Kozlowski" <krzk@kernel.org>,
linux-fsd@tesla.com
Cc: linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Subject: [PATCH 2/8] arm64: dts: exynos: Align continued properties and add missing blank lines
Date: Sun, 26 Jul 2026 19:43:35 +0200 [thread overview]
Message-ID: <20260726-b4-dts-coding-style-strict-v1-2-e9e3e9879d05@oss.qualcomm.com> (raw)
In-Reply-To: <20260726-b4-dts-coding-style-strict-v1-0-e9e3e9879d05@oss.qualcomm.com>
Trivial white-space only changes to adjust to DTS coding style and fix
dt-check-style strict warnings like:
[required-blank-lines] child node must be preceded by a blank line
[continuation-alignment] continuation should align to column 39 (under < or ")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
---
arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi | 19 ++
arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi | 8 +-
.../boot/dts/exynos/exynos5433-tm2-common.dtsi | 120 ++++++-----
arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi | 45 ++++
arch/arm64/boot/dts/exynos/exynos5433.dtsi | 230 ++++++++++++---------
arch/arm64/boot/dts/exynos/exynos7-espresso.dts | 3 +-
.../arm64/boot/dts/exynos/exynos7-trip-points.dtsi | 7 +
arch/arm64/boot/dts/exynos/exynos7.dtsi | 34 ++-
arch/arm64/boot/dts/exynos/exynos7870-j6lte.dts | 4 +-
arch/arm64/boot/dts/exynos/exynos7870.dtsi | 9 +-
arch/arm64/boot/dts/exynos/exynos7885.dtsi | 9 +-
arch/arm64/boot/dts/exynos/exynos850-pinctrl.dtsi | 1 +
arch/arm64/boot/dts/exynos/exynos850.dtsi | 16 +-
arch/arm64/boot/dts/exynos/exynos8855.dtsi | 5 +
arch/arm64/boot/dts/exynos/exynos8895.dtsi | 9 +-
arch/arm64/boot/dts/exynos/exynos9810.dtsi | 9 +-
arch/arm64/boot/dts/exynos/exynos990.dtsi | 3 +-
arch/arm64/boot/dts/exynos/exynosautov9.dtsi | 9 +-
arch/arm64/boot/dts/exynos/exynosautov920.dtsi | 7 +
19 files changed, 359 insertions(+), 188 deletions(-)
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi
index 0c200df9996f..9bfa0474675c 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi
@@ -105,22 +105,27 @@ opp-400000000 {
opp-hz = /bits/ 64 <400000000>;
opp-microvolt = <1075000>;
};
+
opp-267000000 {
opp-hz = /bits/ 64 <267000000>;
opp-microvolt = <1000000>;
};
+
opp-200000000 {
opp-hz = /bits/ 64 <200000000>;
opp-microvolt = <975000>;
};
+
opp-160000000 {
opp-hz = /bits/ 64 <160000000>;
opp-microvolt = <962500>;
};
+
opp-134000000 {
opp-hz = /bits/ 64 <134000000>;
opp-microvolt = <950000>;
};
+
opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
opp-microvolt = <937500>;
@@ -133,15 +138,19 @@ bus_g2d_266_opp_table: opp-table-3 {
opp-267000000 {
opp-hz = /bits/ 64 <267000000>;
};
+
opp-200000000 {
opp-hz = /bits/ 64 <200000000>;
};
+
opp-160000000 {
opp-hz = /bits/ 64 <160000000>;
};
+
opp-134000000 {
opp-hz = /bits/ 64 <134000000>;
};
+
opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
};
@@ -153,9 +162,11 @@ bus_gscl_opp_table: opp-table-4 {
opp-333000000 {
opp-hz = /bits/ 64 <333000000>;
};
+
opp-222000000 {
opp-hz = /bits/ 64 <222000000>;
};
+
opp-166500000 {
opp-hz = /bits/ 64 <166500000>;
};
@@ -168,18 +179,23 @@ bus_hevc_opp_table: opp-table-5 {
opp-400000000 {
opp-hz = /bits/ 64 <400000000>;
};
+
opp-267000000 {
opp-hz = /bits/ 64 <267000000>;
};
+
opp-200000000 {
opp-hz = /bits/ 64 <200000000>;
};
+
opp-160000000 {
opp-hz = /bits/ 64 <160000000>;
};
+
opp-134000000 {
opp-hz = /bits/ 64 <134000000>;
};
+
opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
};
@@ -191,12 +207,15 @@ bus_noc2_opp_table: opp-table-6 {
opp-400000000 {
opp-hz = /bits/ 64 <400000000>;
};
+
opp-200000000 {
opp-hz = /bits/ 64 <200000000>;
};
+
opp-134000000 {
opp-hz = /bits/ 64 <134000000>;
};
+
opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
};
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi
index 681553577ebc..d6850c51db26 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi
@@ -139,7 +139,7 @@ gpz1: gpz1-gpio-bank {
i2s0_bus: i2s0-bus-pins {
samsung,pins = "gpz0-0", "gpz0-1", "gpz0-2", "gpz0-3",
- "gpz0-4", "gpz0-5", "gpz0-6";
+ "gpz0-4", "gpz0-5", "gpz0-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
@@ -572,16 +572,14 @@ hs_i2c9_bus: hs-i2c9-bus-pins {
};
i2s1_bus: i2s1-bus-pins {
- samsung,pins = "gpd4-0", "gpd4-1", "gpd4-2",
- "gpd4-3", "gpd4-4";
+ samsung,pins = "gpd4-0", "gpd4-1", "gpd4-2", "gpd4-3", "gpd4-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
};
pcm1_bus: pcm1-bus-pins {
- samsung,pins = "gpd4-0", "gpd4-1", "gpd4-2",
- "gpd4-3", "gpd4-4";
+ samsung,pins = "gpd4-0", "gpd4-1", "gpd4-2", "gpd4-3", "gpd4-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
index bc5ff66d8455..0ad02a098765 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
@@ -234,60 +234,60 @@ &bus_noc2 {
&cmu_aud {
assigned-clocks = <&cmu_aud CLK_MOUT_AUD_PLL_USER>,
- <&cmu_aud CLK_MOUT_SCLK_AUD_I2S>,
- <&cmu_aud CLK_MOUT_SCLK_AUD_PCM>,
- <&cmu_top CLK_MOUT_AUD_PLL>,
- <&cmu_top CLK_MOUT_AUD_PLL_USER_T>,
- <&cmu_top CLK_MOUT_SCLK_AUDIO0>,
- <&cmu_top CLK_MOUT_SCLK_AUDIO1>,
- <&cmu_top CLK_MOUT_SCLK_SPDIF>,
+ <&cmu_aud CLK_MOUT_SCLK_AUD_I2S>,
+ <&cmu_aud CLK_MOUT_SCLK_AUD_PCM>,
+ <&cmu_top CLK_MOUT_AUD_PLL>,
+ <&cmu_top CLK_MOUT_AUD_PLL_USER_T>,
+ <&cmu_top CLK_MOUT_SCLK_AUDIO0>,
+ <&cmu_top CLK_MOUT_SCLK_AUDIO1>,
+ <&cmu_top CLK_MOUT_SCLK_SPDIF>,
- <&cmu_aud CLK_DIV_AUD_CA5>,
- <&cmu_aud CLK_DIV_ACLK_AUD>,
- <&cmu_aud CLK_DIV_PCLK_DBG_AUD>,
- <&cmu_aud CLK_DIV_SCLK_AUD_I2S>,
- <&cmu_aud CLK_DIV_SCLK_AUD_PCM>,
- <&cmu_aud CLK_DIV_SCLK_AUD_SLIMBUS>,
- <&cmu_aud CLK_DIV_SCLK_AUD_UART>,
- <&cmu_top CLK_DIV_SCLK_AUDIO0>,
- <&cmu_top CLK_DIV_SCLK_AUDIO1>,
- <&cmu_top CLK_DIV_SCLK_PCM1>,
- <&cmu_top CLK_DIV_SCLK_I2S1>;
+ <&cmu_aud CLK_DIV_AUD_CA5>,
+ <&cmu_aud CLK_DIV_ACLK_AUD>,
+ <&cmu_aud CLK_DIV_PCLK_DBG_AUD>,
+ <&cmu_aud CLK_DIV_SCLK_AUD_I2S>,
+ <&cmu_aud CLK_DIV_SCLK_AUD_PCM>,
+ <&cmu_aud CLK_DIV_SCLK_AUD_SLIMBUS>,
+ <&cmu_aud CLK_DIV_SCLK_AUD_UART>,
+ <&cmu_top CLK_DIV_SCLK_AUDIO0>,
+ <&cmu_top CLK_DIV_SCLK_AUDIO1>,
+ <&cmu_top CLK_DIV_SCLK_PCM1>,
+ <&cmu_top CLK_DIV_SCLK_I2S1>;
assigned-clock-parents = <&cmu_top CLK_FOUT_AUD_PLL>,
- <&cmu_aud CLK_MOUT_AUD_PLL_USER>,
- <&cmu_aud CLK_MOUT_AUD_PLL_USER>,
- <&cmu_top CLK_FOUT_AUD_PLL>,
- <&cmu_top CLK_MOUT_AUD_PLL>,
- <&cmu_top CLK_MOUT_AUD_PLL_USER_T>,
- <&cmu_top CLK_MOUT_AUD_PLL_USER_T>,
- <&cmu_top CLK_SCLK_AUDIO0>;
+ <&cmu_aud CLK_MOUT_AUD_PLL_USER>,
+ <&cmu_aud CLK_MOUT_AUD_PLL_USER>,
+ <&cmu_top CLK_FOUT_AUD_PLL>,
+ <&cmu_top CLK_MOUT_AUD_PLL>,
+ <&cmu_top CLK_MOUT_AUD_PLL_USER_T>,
+ <&cmu_top CLK_MOUT_AUD_PLL_USER_T>,
+ <&cmu_top CLK_SCLK_AUDIO0>;
assigned-clock-rates = <0>, <0>, <0>, <0>, <0>, <0>, <0>, <0>,
- <196608001>, <65536001>, <32768001>, <49152001>,
- <2048001>, <24576001>, <196608001>,
- <24576001>, <98304001>, <2048001>, <49152001>;
+ <196608001>, <65536001>, <32768001>, <49152001>,
+ <2048001>, <24576001>, <196608001>,
+ <24576001>, <98304001>, <2048001>, <49152001>;
};
&cmu_fsys {
assigned-clocks = <&cmu_top CLK_MOUT_SCLK_USBDRD30>,
- <&cmu_top CLK_MOUT_SCLK_USBHOST30>,
- <&cmu_fsys CLK_MOUT_SCLK_USBDRD30_USER>,
- <&cmu_fsys CLK_MOUT_SCLK_USBHOST30_USER>,
- <&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_USER>,
- <&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_USER>,
- <&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_USER>,
- <&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_USER>,
- <&cmu_top CLK_DIV_SCLK_USBDRD30>,
- <&cmu_top CLK_DIV_SCLK_USBHOST30>;
+ <&cmu_top CLK_MOUT_SCLK_USBHOST30>,
+ <&cmu_fsys CLK_MOUT_SCLK_USBDRD30_USER>,
+ <&cmu_fsys CLK_MOUT_SCLK_USBHOST30_USER>,
+ <&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_USER>,
+ <&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_USER>,
+ <&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_USER>,
+ <&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_USER>,
+ <&cmu_top CLK_DIV_SCLK_USBDRD30>,
+ <&cmu_top CLK_DIV_SCLK_USBHOST30>;
assigned-clock-parents = <&cmu_top CLK_MOUT_BUS_PLL_USER>,
- <&cmu_top CLK_MOUT_BUS_PLL_USER>,
- <&cmu_top CLK_SCLK_USBDRD30_FSYS>,
- <&cmu_top CLK_SCLK_USBHOST30_FSYS>,
- <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_PHY>,
- <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_PHY>,
- <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_PHY>,
- <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_PHY>;
+ <&cmu_top CLK_MOUT_BUS_PLL_USER>,
+ <&cmu_top CLK_SCLK_USBDRD30_FSYS>,
+ <&cmu_top CLK_SCLK_USBHOST30_FSYS>,
+ <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_PHY>,
+ <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_PHY>,
+ <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_PHY>,
+ <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_PHY>;
assigned-clock-rates = <0>, <0>, <0>, <0>, <0>, <0>, <0>, <0>,
<66700000>, <66700000>;
};
@@ -347,6 +347,7 @@ ports {
port@0 {
reg = <0>;
+
tv_to_hdmi: endpoint {
remote-endpoint = <&hdmi_to_tv>;
};
@@ -386,6 +387,7 @@ ports {
port@0 {
reg = <0>;
+
hdmi_to_tv: endpoint {
remote-endpoint = <&tv_to_hdmi>;
};
@@ -393,6 +395,7 @@ hdmi_to_tv: endpoint {
port@1 {
reg = <1>;
+
hdmi_to_mhl: endpoint {
remote-endpoint = <&mhl_to_hdmi>;
};
@@ -416,8 +419,7 @@ pmic@66 {
s2mps13_osc: clocks {
compatible = "samsung,s2mps13-clk";
#clock-cells = <1>;
- clock-output-names = "s2mps13_ap", "s2mps13_cp",
- "s2mps13_bt";
+ clock-output-names = "s2mps13_ap", "s2mps13_cp", "s2mps13_bt";
};
regulators {
@@ -433,6 +435,7 @@ ldo2_reg: LDO2 {
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-always-on;
+
regulator-state-mem {
regulator-off-in-suspend;
};
@@ -450,6 +453,7 @@ ldo4_reg: LDO4 {
regulator-min-microvolt = <1300000>;
regulator-max-microvolt = <1300000>;
regulator-always-on;
+
regulator-state-mem {
regulator-off-in-suspend;
};
@@ -460,6 +464,7 @@ ldo5_reg: LDO5 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
+
regulator-state-mem {
regulator-off-in-suspend;
};
@@ -469,6 +474,7 @@ ldo6_reg: LDO6 {
regulator-name = "VDD10_MIPI2L_1.0V_AP";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
+
regulator-state-mem {
regulator-off-in-suspend;
};
@@ -479,6 +485,7 @@ ldo7_reg: LDO7 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
+
regulator-state-mem {
regulator-off-in-suspend;
};
@@ -489,6 +496,7 @@ ldo8_reg: LDO8 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
+
regulator-state-mem {
regulator-off-in-suspend;
};
@@ -499,6 +507,7 @@ ldo9_reg: LDO9 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
+
regulator-state-mem {
regulator-off-in-suspend;
};
@@ -508,6 +517,7 @@ ldo10_reg: LDO10 {
regulator-name = "VDD33_USB30_3.0V_AP";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
+
regulator-state-mem {
regulator-off-in-suspend;
};
@@ -518,6 +528,7 @@ ldo11_reg: LDO11 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
+
regulator-state-mem {
regulator-off-in-suspend;
};
@@ -535,6 +546,7 @@ ldo13_reg: LDO13 {
regulator-min-microvolt = <950000>;
regulator-max-microvolt = <950000>;
regulator-always-on;
+
regulator-state-mem {
regulator-off-in-suspend;
};
@@ -545,6 +557,7 @@ ldo14_reg: LDO14 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
+
regulator-state-mem {
regulator-off-in-suspend;
};
@@ -555,6 +568,7 @@ ldo15_reg: LDO15 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
+
regulator-state-mem {
regulator-off-in-suspend;
};
@@ -721,6 +735,7 @@ buck1_reg: BUCK1 {
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <1500000>;
regulator-always-on;
+
regulator-state-mem {
regulator-off-in-suspend;
};
@@ -731,6 +746,7 @@ buck2_reg: BUCK2 {
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1300000>;
regulator-always-on;
+
regulator-state-mem {
regulator-off-in-suspend;
};
@@ -741,6 +757,7 @@ buck3_reg: BUCK3 {
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
+
regulator-state-mem {
regulator-off-in-suspend;
};
@@ -751,6 +768,7 @@ buck4_reg: BUCK4 {
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <1500000>;
regulator-always-on;
+
regulator-state-mem {
regulator-off-in-suspend;
};
@@ -761,6 +779,7 @@ buck5_reg: BUCK5 {
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <1500000>;
regulator-always-on;
+
regulator-state-mem {
regulator-off-in-suspend;
};
@@ -771,6 +790,7 @@ buck6_reg: BUCK6 {
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <1500000>;
regulator-always-on;
+
regulator-state-mem {
regulator-off-in-suspend;
};
@@ -855,6 +875,7 @@ ports {
port@0 {
reg = <0>;
+
mhl_to_hdmi: endpoint {
remote-endpoint = <&hdmi_to_mhl>;
};
@@ -862,6 +883,7 @@ mhl_to_hdmi: endpoint {
port@1 {
reg = <1>;
+
mhl_to_musb_con: endpoint {
remote-endpoint = <&musb_con_to_mhl>;
};
@@ -906,6 +928,7 @@ port@0 {
port@3 {
reg = <3>;
+
musb_con_to_mhl: endpoint {
remote-endpoint = <&mhl_to_musb_con>;
};
@@ -924,6 +947,7 @@ muic_to_usb: endpoint {
regulators {
compatible = "maxim,max77843-regulator";
+
safeout1_reg: SAFEOUT1 {
regulator-name = "SAFEOUT1";
regulator-min-microvolt = <3300000>;
@@ -981,7 +1005,7 @@ &mshc_0 {
fifo-depth = <0x80>;
pinctrl-names = "default";
pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_qrdy &sd0_bus1 &sd0_bus4
- &sd0_bus8 &sd0_rdqs>;
+ &sd0_bus8 &sd0_rdqs>;
bus-width = <8>;
assigned-clocks = <&cmu_top CLK_SCLK_MMC0_FSYS>;
assigned-clock-rates = <800000000>;
@@ -1304,7 +1328,7 @@ wm5110: audio-codec@0 {
interrupt-parent = <&gpa0>;
interrupts = <4 IRQ_TYPE_NONE>;
clocks = <&pmu_system_controller 0>,
- <&s2mps13_osc S2MPS11_CLK_BT>;
+ <&s2mps13_osc S2MPS11_CLK_BT>;
clock-names = "mclk1", "mclk2";
gpio-controller;
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi
index 81b72393dd0d..57b335f579d8 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi
@@ -13,37 +13,44 @@ atlas0_thermal: atlas0-thermal {
thermal-sensors = <&tmu_atlas0>;
polling-delay-passive = <0>;
polling-delay = <0>;
+
trips {
atlas0_alert_0: atlas0-alert-0 {
temperature = <65000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
type = "active";
};
+
atlas0_alert_1: atlas0-alert-1 {
temperature = <70000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
type = "active";
};
+
atlas0_alert_2: atlas0-alert-2 {
temperature = <75000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
type = "active";
};
+
atlas0_alert_3: atlas0-alert-3 {
temperature = <80000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
type = "active";
};
+
atlas0_alert_4: atlas0-alert-4 {
temperature = <85000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
type = "active";
};
+
atlas0_alert_5: atlas0-alert-5 {
temperature = <90000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
type = "active";
};
+
atlas0_alert_6: atlas0-alert-6 {
temperature = <95000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
@@ -58,36 +65,42 @@ map0 {
cooling-device = <&cpu4 1 2>, <&cpu5 1 2>,
<&cpu6 1 2>, <&cpu7 1 2>;
};
+
map1 {
/* Set maximum frequency as 1700MHz */
trip = <&atlas0_alert_1>;
cooling-device = <&cpu4 2 3>, <&cpu5 2 3>,
<&cpu6 2 3>, <&cpu7 2 3>;
};
+
map2 {
/* Set maximum frequency as 1600MHz */
trip = <&atlas0_alert_2>;
cooling-device = <&cpu4 3 4>, <&cpu5 3 4>,
<&cpu6 3 4>, <&cpu7 3 4>;
};
+
map3 {
/* Set maximum frequency as 1500MHz */
trip = <&atlas0_alert_3>;
cooling-device = <&cpu4 4 5>, <&cpu5 4 5>,
<&cpu6 4 5>, <&cpu7 4 5>;
};
+
map4 {
/* Set maximum frequency as 1400MHz */
trip = <&atlas0_alert_4>;
cooling-device = <&cpu4 5 7>, <&cpu5 5 7>,
<&cpu6 5 7>, <&cpu7 5 7>;
};
+
map5 {
/* Set maximum frequencyas 1200MHz */
trip = <&atlas0_alert_5>;
cooling-device = <&cpu4 7 9>, <&cpu5 7 9>,
<&cpu6 7 9>, <&cpu7 7 9>;
};
+
map6 {
/* Set maximum frequency as 1000MHz */
trip = <&atlas0_alert_6>;
@@ -101,37 +114,44 @@ atlas1_thermal: atlas1-thermal {
thermal-sensors = <&tmu_atlas1>;
polling-delay-passive = <0>;
polling-delay = <0>;
+
trips {
atlas1_alert_0: atlas1-alert-0 {
temperature = <65000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
type = "active";
};
+
atlas1_alert_1: atlas1-alert-1 {
temperature = <70000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
type = "active";
};
+
atlas1_alert_2: atlas1-alert-2 {
temperature = <75000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
type = "active";
};
+
atlas1_alert_3: atlas1-alert-3 {
temperature = <80000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
type = "active";
};
+
atlas1_alert_4: atlas1-alert-4 {
temperature = <85000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
type = "active";
};
+
atlas1_alert_5: atlas1-alert-5 {
temperature = <90000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
type = "active";
};
+
atlas1_alert_6: atlas1-alert-6 {
temperature = <95000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
@@ -144,37 +164,44 @@ g3d_thermal: g3d-thermal {
thermal-sensors = <&tmu_g3d>;
polling-delay-passive = <0>;
polling-delay = <0>;
+
trips {
g3d_alert_0: g3d-alert-0 {
temperature = <70000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
type = "active";
};
+
g3d_alert_1: g3d-alert-1 {
temperature = <75000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
type = "active";
};
+
g3d_alert_2: g3d-alert-2 {
temperature = <80000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
type = "active";
};
+
g3d_alert_3: g3d-alert-3 {
temperature = <85000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
type = "active";
};
+
g3d_alert_4: g3d-alert-4 {
temperature = <90000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
type = "active";
};
+
g3d_alert_5: g3d-alert-5 {
temperature = <95000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
type = "active";
};
+
g3d_alert_6: g3d-alert-6 {
temperature = <100000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
@@ -187,37 +214,44 @@ apollo_thermal: apollo-thermal {
thermal-sensors = <&tmu_apollo>;
polling-delay-passive = <0>;
polling-delay = <0>;
+
trips {
apollo_alert_0: apollo-alert-0 {
temperature = <65000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
type = "active";
};
+
apollo_alert_1: apollo-alert-1 {
temperature = <70000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
type = "active";
};
+
apollo_alert_2: apollo-alert-2 {
temperature = <75000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
type = "active";
};
+
apollo_alert_3: apollo-alert-3 {
temperature = <80000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
type = "active";
};
+
apollo_alert_4: apollo-alert-4 {
temperature = <85000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
type = "active";
};
+
apollo_alert_5: apollo-alert-5 {
temperature = <90000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
type = "active";
};
+
apollo_alert_6: apollo-alert-6 {
temperature = <95000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
@@ -232,24 +266,28 @@ map0 {
cooling-device = <&cpu0 1 2>, <&cpu1 1 2>,
<&cpu2 1 2>, <&cpu3 1 2>;
};
+
map1 {
/* Set maximum frequency as 1100MHz */
trip = <&apollo_alert_3>;
cooling-device = <&cpu0 2 3>, <&cpu1 2 3>,
<&cpu2 2 3>, <&cpu3 2 3>;
};
+
map2 {
/* Set maximum frequency as 1000MHz */
trip = <&apollo_alert_4>;
cooling-device = <&cpu0 3 4>, <&cpu1 3 4>,
<&cpu2 3 4>, <&cpu3 3 4>;
};
+
map3 {
/* Set maximum frequency as 900MHz */
trip = <&apollo_alert_5>;
cooling-device = <&cpu0 4 5>, <&cpu1 4 5>,
<&cpu2 4 5>, <&cpu3 4 5>;
};
+
map4 {
/* Set maximum frequency as 800MHz */
trip = <&apollo_alert_6>;
@@ -263,37 +301,44 @@ isp_thermal: isp-thermal {
thermal-sensors = <&tmu_isp>;
polling-delay-passive = <0>;
polling-delay = <0>;
+
trips {
isp_alert_0: isp-alert-0 {
temperature = <80000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
type = "active";
};
+
isp_alert_1: isp-alert-1 {
temperature = <85000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
type = "active";
};
+
isp_alert_2: isp-alert-2 {
temperature = <90000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
type = "active";
};
+
isp_alert_3: isp-alert-3 {
temperature = <95000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
type = "active";
};
+
isp_alert_4: isp-alert-4 {
temperature = <100000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
type = "active";
};
+
isp_alert_5: isp-alert-5 {
temperature = <105000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
type = "active";
};
+
isp_alert_6: isp-alert-6 {
temperature = <110000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
index 17b13a586973..aa7539d92e8e 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
@@ -57,12 +57,15 @@ cluster0 {
core0 {
cpu = <&cpu0>;
};
+
core1 {
cpu = <&cpu1>;
};
+
core2 {
cpu = <&cpu2>;
};
+
core3 {
cpu = <&cpu3>;
};
@@ -72,12 +75,15 @@ cluster1 {
core0 {
cpu = <&cpu4>;
};
+
core1 {
cpu = <&cpu5>;
};
+
core2 {
cpu = <&cpu6>;
};
+
core3 {
cpu = <&cpu7>;
};
@@ -243,38 +249,47 @@ opp-400000000 {
opp-hz = /bits/ 64 <400000000>;
opp-microvolt = <900000>;
};
+
opp-500000000 {
opp-hz = /bits/ 64 <500000000>;
opp-microvolt = <925000>;
};
+
opp-600000000 {
opp-hz = /bits/ 64 <600000000>;
opp-microvolt = <950000>;
};
+
opp-700000000 {
opp-hz = /bits/ 64 <700000000>;
opp-microvolt = <975000>;
};
+
opp-800000000 {
opp-hz = /bits/ 64 <800000000>;
opp-microvolt = <1000000>;
};
+
opp-900000000 {
opp-hz = /bits/ 64 <900000000>;
opp-microvolt = <1050000>;
};
+
opp-1000000000 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <1075000>;
};
+
opp-1100000000 {
opp-hz = /bits/ 64 <1100000000>;
opp-microvolt = <1112500>;
};
+
opp-1200000000 {
opp-hz = /bits/ 64 <1200000000>;
opp-microvolt = <1112500>;
};
+
opp-1300000000 {
opp-hz = /bits/ 64 <1300000000>;
opp-microvolt = <1150000>;
@@ -289,58 +304,72 @@ opp-500000000 {
opp-hz = /bits/ 64 <500000000>;
opp-microvolt = <900000>;
};
+
opp-600000000 {
opp-hz = /bits/ 64 <600000000>;
opp-microvolt = <900000>;
};
+
opp-700000000 {
opp-hz = /bits/ 64 <700000000>;
opp-microvolt = <912500>;
};
+
opp-800000000 {
opp-hz = /bits/ 64 <800000000>;
opp-microvolt = <912500>;
};
+
opp-900000000 {
opp-hz = /bits/ 64 <900000000>;
opp-microvolt = <937500>;
};
+
opp-1000000000 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <975000>;
};
+
opp-1100000000 {
opp-hz = /bits/ 64 <1100000000>;
opp-microvolt = <1012500>;
};
+
opp-1200000000 {
opp-hz = /bits/ 64 <1200000000>;
opp-microvolt = <1037500>;
};
+
opp-1300000000 {
opp-hz = /bits/ 64 <1300000000>;
opp-microvolt = <1062500>;
};
+
opp-1400000000 {
opp-hz = /bits/ 64 <1400000000>;
opp-microvolt = <1087500>;
};
+
opp-1500000000 {
opp-hz = /bits/ 64 <1500000000>;
opp-microvolt = <1125000>;
};
+
opp-1600000000 {
opp-hz = /bits/ 64 <1600000000>;
opp-microvolt = <1137500>;
};
+
opp-1700000000 {
opp-hz = /bits/ 64 <1700000000>;
opp-microvolt = <1175000>;
};
+
opp-1800000000 {
opp-hz = /bits/ 64 <1800000000>;
opp-microvolt = <1212500>;
};
+
opp-1900000000 {
opp-hz = /bits/ 64 <1900000000>;
opp-microvolt = <1262500>;
@@ -752,7 +781,7 @@ tmu_atlas0: tmu@10060000 {
reg = <0x10060000 0x200>;
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu_peris CLK_PCLK_TMU0_APBIF>,
- <&cmu_peris CLK_SCLK_TMU0>;
+ <&cmu_peris CLK_SCLK_TMU0>;
clock-names = "tmu_apbif", "tmu_sclk";
#thermal-sensor-cells = <0>;
@@ -764,7 +793,7 @@ tmu_atlas1: tmu@10068000 {
reg = <0x10068000 0x200>;
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu_peris CLK_PCLK_TMU0_APBIF>,
- <&cmu_peris CLK_SCLK_TMU0>;
+ <&cmu_peris CLK_SCLK_TMU0>;
clock-names = "tmu_apbif", "tmu_sclk";
#thermal-sensor-cells = <0>;
@@ -777,7 +806,7 @@ tmu_g3d: tmu@10070000 {
reg = <0x10070000 0x200>;
interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu_peris CLK_PCLK_TMU1_APBIF>,
- <&cmu_peris CLK_SCLK_TMU1>;
+ <&cmu_peris CLK_SCLK_TMU1>;
clock-names = "tmu_apbif", "tmu_sclk";
#thermal-sensor-cells = <0>;
@@ -789,7 +818,7 @@ tmu_apollo: tmu@10078000 {
reg = <0x10078000 0x200>;
interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu_peris CLK_PCLK_TMU1_APBIF>,
- <&cmu_peris CLK_SCLK_TMU1>;
+ <&cmu_peris CLK_SCLK_TMU1>;
clock-names = "tmu_apbif", "tmu_sclk";
#thermal-sensor-cells = <0>;
@@ -801,7 +830,7 @@ tmu_isp: tmu@1007c000 {
reg = <0x1007c000 0x200>;
interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu_peris CLK_PCLK_TMU1_APBIF>,
- <&cmu_peris CLK_SCLK_TMU1>;
+ <&cmu_peris CLK_SCLK_TMU1>;
clock-names = "tmu_apbif", "tmu_sclk";
#thermal-sensor-cells = <0>;
@@ -813,17 +842,17 @@ timer@101c0000 {
"samsung,exynos4210-mct";
reg = <0x101c0000 0x800>;
interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+ <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&xxti>, <&cmu_peris CLK_PCLK_MCT>;
clock-names = "fin_pll", "mct";
};
@@ -961,21 +990,21 @@ decon: decon@13800000 {
compatible = "samsung,exynos5433-decon";
reg = <0x13800000 0x2104>;
clocks = <&cmu_disp CLK_PCLK_DECON>,
- <&cmu_disp CLK_ACLK_DECON>,
- <&cmu_disp CLK_ACLK_SMMU_DECON0X>,
- <&cmu_disp CLK_ACLK_XIU_DECON0X>,
- <&cmu_disp CLK_PCLK_SMMU_DECON0X>,
- <&cmu_disp CLK_ACLK_SMMU_DECON1X>,
- <&cmu_disp CLK_ACLK_XIU_DECON1X>,
- <&cmu_disp CLK_PCLK_SMMU_DECON1X>,
- <&cmu_disp CLK_SCLK_DECON_VCLK>,
- <&cmu_disp CLK_SCLK_DECON_ECLK>,
- <&cmu_disp CLK_SCLK_DSD>;
+ <&cmu_disp CLK_ACLK_DECON>,
+ <&cmu_disp CLK_ACLK_SMMU_DECON0X>,
+ <&cmu_disp CLK_ACLK_XIU_DECON0X>,
+ <&cmu_disp CLK_PCLK_SMMU_DECON0X>,
+ <&cmu_disp CLK_ACLK_SMMU_DECON1X>,
+ <&cmu_disp CLK_ACLK_XIU_DECON1X>,
+ <&cmu_disp CLK_PCLK_SMMU_DECON1X>,
+ <&cmu_disp CLK_SCLK_DECON_VCLK>,
+ <&cmu_disp CLK_SCLK_DECON_ECLK>,
+ <&cmu_disp CLK_SCLK_DSD>;
clock-names = "pclk", "aclk_decon", "aclk_smmu_decon0x",
- "aclk_xiu_decon0x", "pclk_smmu_decon0x",
- "aclk_smmu_decon1x", "aclk_xiu_decon1x",
- "pclk_smmu_decon1x", "sclk_decon_vclk",
- "sclk_decon_eclk", "dsd";
+ "aclk_xiu_decon0x", "pclk_smmu_decon0x",
+ "aclk_smmu_decon1x", "aclk_xiu_decon1x",
+ "pclk_smmu_decon1x", "sclk_decon_vclk",
+ "sclk_decon_eclk", "dsd";
power-domains = <&pd_disp>;
interrupt-names = "fifo", "vsync", "lcd_sys";
interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
@@ -993,6 +1022,7 @@ ports {
port@0 {
reg = <0>;
+
decon_to_mic: endpoint {
remote-endpoint =
<&mic_to_decon>;
@@ -1039,15 +1069,15 @@ dsi: dsi@13900000 {
phys = <&mipi_phy 1>;
phy-names = "dsim";
clocks = <&cmu_disp CLK_PCLK_DSIM0>,
- <&cmu_disp CLK_PHYCLK_MIPIDPHY0_BITCLKDIV8>,
- <&cmu_disp CLK_PHYCLK_MIPIDPHY0_RXCLKESC0>,
- <&cmu_disp CLK_SCLK_RGB_VCLK_TO_DSIM0>,
- <&cmu_disp CLK_SCLK_DSIM0>;
+ <&cmu_disp CLK_PHYCLK_MIPIDPHY0_BITCLKDIV8>,
+ <&cmu_disp CLK_PHYCLK_MIPIDPHY0_RXCLKESC0>,
+ <&cmu_disp CLK_SCLK_RGB_VCLK_TO_DSIM0>,
+ <&cmu_disp CLK_SCLK_DSIM0>;
clock-names = "bus_clk",
- "phyclk_mipidphy0_bitclkdiv8",
- "phyclk_mipidphy0_rxclkesc0",
- "sclk_rgb_vclk_to_dsim0",
- "sclk_mipi";
+ "phyclk_mipidphy0_bitclkdiv8",
+ "phyclk_mipidphy0_rxclkesc0",
+ "sclk_rgb_vclk_to_dsim0",
+ "sclk_mipi";
power-domains = <&pd_disp>;
#address-cells = <1>;
#size-cells = <0>;
@@ -1060,6 +1090,7 @@ ports {
port@0 {
reg = <0>;
+
dsi_to_mic: endpoint {
remote-endpoint = <&mic_to_dsi>;
};
@@ -1071,7 +1102,7 @@ mic: mic@13930000 {
compatible = "samsung,exynos5433-mic";
reg = <0x13930000 0x48>;
clocks = <&cmu_disp CLK_PCLK_MIC0>,
- <&cmu_disp CLK_SCLK_RGB_VCLK_TO_MIC0>;
+ <&cmu_disp CLK_SCLK_RGB_VCLK_TO_MIC0>;
clock-names = "pclk_mic0", "sclk_rgb_vclk_to_mic0";
power-domains = <&pd_disp>;
samsung,disp-syscon = <&syscon_disp>;
@@ -1084,6 +1115,7 @@ ports {
port@0 {
reg = <0>;
+
mic_to_decon: endpoint {
remote-endpoint =
<&decon_to_mic>;
@@ -1092,6 +1124,7 @@ mic_to_decon: endpoint {
port@1 {
reg = <1>;
+
mic_to_dsi: endpoint {
remote-endpoint = <&dsi_to_mic>;
};
@@ -1104,19 +1137,19 @@ hdmi: hdmi@13970000 {
reg = <0x13970000 0x70000>;
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu_disp CLK_PCLK_HDMI>,
- <&cmu_disp CLK_PCLK_HDMIPHY>,
- <&cmu_disp CLK_PHYCLK_HDMIPHY_TMDS_CLKO>,
- <&cmu_disp CLK_PHYCLK_HDMI_PIXEL>,
- <&cmu_disp CLK_PHYCLK_HDMIPHY_TMDS_CLKO_PHY>,
- <&cmu_disp CLK_MOUT_PHYCLK_HDMIPHY_TMDS_CLKO_USER>,
- <&cmu_disp CLK_PHYCLK_HDMIPHY_PIXEL_CLKO_PHY>,
- <&cmu_disp CLK_MOUT_PHYCLK_HDMIPHY_PIXEL_CLKO_USER>,
- <&xxti>, <&cmu_disp CLK_SCLK_HDMI_SPDIF>;
+ <&cmu_disp CLK_PCLK_HDMIPHY>,
+ <&cmu_disp CLK_PHYCLK_HDMIPHY_TMDS_CLKO>,
+ <&cmu_disp CLK_PHYCLK_HDMI_PIXEL>,
+ <&cmu_disp CLK_PHYCLK_HDMIPHY_TMDS_CLKO_PHY>,
+ <&cmu_disp CLK_MOUT_PHYCLK_HDMIPHY_TMDS_CLKO_USER>,
+ <&cmu_disp CLK_PHYCLK_HDMIPHY_PIXEL_CLKO_PHY>,
+ <&cmu_disp CLK_MOUT_PHYCLK_HDMIPHY_PIXEL_CLKO_USER>,
+ <&xxti>, <&cmu_disp CLK_SCLK_HDMI_SPDIF>;
clock-names = "hdmi_pclk", "hdmi_i_pclk",
- "i_tmds_clk", "i_pixel_clk",
- "tmds_clko", "tmds_clko_user",
- "pixel_clko", "pixel_clko_user",
- "oscclk", "i_spdif_clk";
+ "i_tmds_clk", "i_pixel_clk",
+ "tmds_clko", "tmds_clko_user",
+ "pixel_clko", "pixel_clko_user",
+ "oscclk", "i_spdif_clk";
phy = <&hdmiphy>;
ddc = <&hsi2c_11>;
samsung,syscon-phandle = <&pmu_system_controller>;
@@ -1220,30 +1253,37 @@ opp-160000000 {
opp-hz = /bits/ 64 <160000000>;
opp-microvolt = <1000000>;
};
+
opp-267000000 {
opp-hz = /bits/ 64 <267000000>;
opp-microvolt = <1000000>;
};
+
opp-350000000 {
opp-hz = /bits/ 64 <350000000>;
opp-microvolt = <1025000>;
};
+
opp-420000000 {
opp-hz = /bits/ 64 <420000000>;
opp-microvolt = <1025000>;
};
+
opp-500000000 {
opp-hz = /bits/ 64 <500000000>;
opp-microvolt = <1075000>;
};
+
opp-550000000 {
opp-hz = /bits/ 64 <550000000>;
opp-microvolt = <1125000>;
};
+
opp-600000000 {
opp-hz = /bits/ 64 <600000000>;
opp-microvolt = <1150000>;
};
+
opp-700000000 {
opp-hz = /bits/ 64 <700000000>;
opp-microvolt = <1150000>;
@@ -1438,7 +1478,7 @@ serial_0: serial@14c10000 {
reg = <0x14c10000 0x100>;
interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu_peric CLK_PCLK_UART0>,
- <&cmu_peric CLK_SCLK_UART0>;
+ <&cmu_peric CLK_SCLK_UART0>;
clock-names = "uart", "clk_uart_baud0";
pinctrl-names = "default";
pinctrl-0 = <&uart0_bus>;
@@ -1451,7 +1491,7 @@ serial_1: serial@14c20000 {
reg = <0x14c20000 0x100>;
interrupts = <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu_peric CLK_PCLK_UART1>,
- <&cmu_peric CLK_SCLK_UART1>;
+ <&cmu_peric CLK_SCLK_UART1>;
clock-names = "uart", "clk_uart_baud0";
pinctrl-names = "default";
pinctrl-0 = <&uart1_bus>;
@@ -1464,7 +1504,7 @@ serial_2: serial@14c30000 {
reg = <0x14c30000 0x100>;
interrupts = <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu_peric CLK_PCLK_UART2>,
- <&cmu_peric CLK_SCLK_UART2>;
+ <&cmu_peric CLK_SCLK_UART2>;
clock-names = "uart", "clk_uart_baud0";
pinctrl-names = "default";
pinctrl-0 = <&uart2_bus>;
@@ -1481,8 +1521,8 @@ spi_0: spi@14d20000 {
#address-cells = <1>;
#size-cells = <0>;
clocks = <&cmu_peric CLK_PCLK_SPI0>,
- <&cmu_peric CLK_SCLK_SPI0>,
- <&cmu_peric CLK_SCLK_IOCLK_SPI0>;
+ <&cmu_peric CLK_SCLK_SPI0>,
+ <&cmu_peric CLK_SCLK_IOCLK_SPI0>;
clock-names = "spi", "spi_busclk0", "spi_ioclk";
samsung,spi-src-clk = <0>;
pinctrl-names = "default";
@@ -1502,8 +1542,8 @@ spi_1: spi@14d30000 {
#address-cells = <1>;
#size-cells = <0>;
clocks = <&cmu_peric CLK_PCLK_SPI1>,
- <&cmu_peric CLK_SCLK_SPI1>,
- <&cmu_peric CLK_SCLK_IOCLK_SPI1>;
+ <&cmu_peric CLK_SCLK_SPI1>,
+ <&cmu_peric CLK_SCLK_IOCLK_SPI1>;
clock-names = "spi", "spi_busclk0", "spi_ioclk";
samsung,spi-src-clk = <0>;
pinctrl-names = "default";
@@ -1523,8 +1563,8 @@ spi_2: spi@14d40000 {
#address-cells = <1>;
#size-cells = <0>;
clocks = <&cmu_peric CLK_PCLK_SPI2>,
- <&cmu_peric CLK_SCLK_SPI2>,
- <&cmu_peric CLK_SCLK_IOCLK_SPI2>;
+ <&cmu_peric CLK_SCLK_SPI2>,
+ <&cmu_peric CLK_SCLK_IOCLK_SPI2>;
clock-names = "spi", "spi_busclk0", "spi_ioclk";
samsung,spi-src-clk = <0>;
pinctrl-names = "default";
@@ -1544,8 +1584,8 @@ spi_3: spi@14d50000 {
#address-cells = <1>;
#size-cells = <0>;
clocks = <&cmu_peric CLK_PCLK_SPI3>,
- <&cmu_peric CLK_SCLK_SPI3>,
- <&cmu_peric CLK_SCLK_IOCLK_SPI3>;
+ <&cmu_peric CLK_SCLK_SPI3>,
+ <&cmu_peric CLK_SCLK_IOCLK_SPI3>;
clock-names = "spi", "spi_busclk0", "spi_ioclk";
samsung,spi-src-clk = <0>;
pinctrl-names = "default";
@@ -1565,8 +1605,8 @@ spi_4: spi@14d00000 {
#address-cells = <1>;
#size-cells = <0>;
clocks = <&cmu_peric CLK_PCLK_SPI4>,
- <&cmu_peric CLK_SCLK_SPI4>,
- <&cmu_peric CLK_SCLK_IOCLK_SPI4>;
+ <&cmu_peric CLK_SCLK_SPI4>,
+ <&cmu_peric CLK_SCLK_IOCLK_SPI4>;
clock-names = "spi", "spi_busclk0", "spi_ioclk";
samsung,spi-src-clk = <0>;
pinctrl-names = "default";
@@ -1803,9 +1843,9 @@ hsi2c_11: i2c@14df0000 {
usbdrd30: usb@15400000 {
compatible = "samsung,exynos5433-dwusb3";
clocks = <&cmu_fsys CLK_ACLK_USBDRD30>,
- <&cmu_fsys CLK_SCLK_USBDRD30>,
- <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PHYCLOCK>,
- <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK>;
+ <&cmu_fsys CLK_SCLK_USBDRD30>,
+ <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PHYCLOCK>,
+ <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK>;
clock-names = "aclk", "susp_clk", "phyclk", "pipe_pclk";
#address-cells = <1>;
#size-cells = <1>;
@@ -1816,8 +1856,8 @@ usbdrd30: usb@15400000 {
usbdrd_dwc3: usb@0 {
compatible = "snps,dwc3";
clocks = <&cmu_fsys CLK_SCLK_USBDRD30>,
- <&cmu_fsys CLK_ACLK_USBDRD30>,
- <&cmu_fsys CLK_SCLK_USBDRD30>;
+ <&cmu_fsys CLK_ACLK_USBDRD30>,
+ <&cmu_fsys CLK_SCLK_USBDRD30>;
clock-names = "ref", "bus_early", "suspend";
reg = <0x0 0x10000>;
interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>;
@@ -1830,11 +1870,10 @@ usbdrd30_phy: phy@15500000 {
compatible = "samsung,exynos5433-usbdrd-phy";
reg = <0x15500000 0x100>;
clocks = <&cmu_fsys CLK_ACLK_USBDRD30>, <&xxti>,
- <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PHYCLOCK>,
- <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK>,
- <&cmu_fsys CLK_SCLK_USBDRD30>;
- clock-names = "phy", "ref", "phy_utmi", "phy_pipe",
- "itp";
+ <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PHYCLOCK>,
+ <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK>,
+ <&cmu_fsys CLK_SCLK_USBDRD30>;
+ clock-names = "phy", "ref", "phy_utmi", "phy_pipe", "itp";
#phy-cells = <1>;
samsung,pmu-syscon = <&pmu_system_controller>;
@@ -1845,11 +1884,10 @@ usbhost30_phy: phy@15580000 {
compatible = "samsung,exynos5433-usbdrd-phy";
reg = <0x15580000 0x100>;
clocks = <&cmu_fsys CLK_ACLK_USBHOST30>, <&xxti>,
- <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PHYCLOCK>,
- <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK>,
- <&cmu_fsys CLK_SCLK_USBHOST30>;
- clock-names = "phy", "ref", "phy_utmi", "phy_pipe",
- "itp";
+ <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PHYCLOCK>,
+ <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK>,
+ <&cmu_fsys CLK_SCLK_USBHOST30>;
+ clock-names = "phy", "ref", "phy_utmi", "phy_pipe", "itp";
#phy-cells = <1>;
samsung,pmu-syscon = <&pmu_system_controller>;
@@ -1859,9 +1897,9 @@ usbhost30_phy: phy@15580000 {
usbhost30: usb@15a00000 {
compatible = "samsung,exynos5433-dwusb3";
clocks = <&cmu_fsys CLK_ACLK_USBHOST30>,
- <&cmu_fsys CLK_SCLK_USBHOST30>,
- <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PHYCLOCK>,
- <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK>;
+ <&cmu_fsys CLK_SCLK_USBHOST30>,
+ <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PHYCLOCK>,
+ <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK>;
clock-names = "aclk", "susp_clk", "phyclk", "pipe_pclk";
#address-cells = <1>;
#size-cells = <1>;
@@ -1872,8 +1910,8 @@ usbhost30: usb@15a00000 {
usbhost_dwc3: usb@0 {
compatible = "snps,dwc3";
clocks = <&cmu_fsys CLK_SCLK_USBHOST30>,
- <&cmu_fsys CLK_ACLK_USBHOST30>,
- <&cmu_fsys CLK_SCLK_USBHOST30>;
+ <&cmu_fsys CLK_ACLK_USBHOST30>,
+ <&cmu_fsys CLK_SCLK_USBHOST30>;
clock-names = "ref", "bus_early", "suspend";
reg = <0x0 0x10000>;
interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>;
@@ -1890,7 +1928,7 @@ mshc_0: mmc@15540000 {
#size-cells = <0>;
reg = <0x15540000 0x2000>;
clocks = <&cmu_fsys CLK_ACLK_MMC0>,
- <&cmu_fsys CLK_SCLK_MMC0>;
+ <&cmu_fsys CLK_SCLK_MMC0>;
clock-names = "biu", "ciu";
fifo-depth = <0x40>;
@@ -1905,7 +1943,7 @@ mshc_1: mmc@15550000 {
#size-cells = <0>;
reg = <0x15550000 0x2000>;
clocks = <&cmu_fsys CLK_ACLK_MMC1>,
- <&cmu_fsys CLK_SCLK_MMC1>;
+ <&cmu_fsys CLK_SCLK_MMC1>;
clock-names = "biu", "ciu";
fifo-depth = <0x40>;
@@ -1920,7 +1958,7 @@ mshc_2: mmc@15560000 {
#size-cells = <0>;
reg = <0x15560000 0x2000>;
clocks = <&cmu_fsys CLK_ACLK_MMC2>,
- <&cmu_fsys CLK_SCLK_MMC2>;
+ <&cmu_fsys CLK_SCLK_MMC2>;
clock-names = "biu", "ciu";
fifo-depth = <0x40>;
@@ -1975,8 +2013,8 @@ i2s0: i2s@11440000 {
#address-cells = <1>;
#size-cells = <0>;
clocks = <&cmu_aud CLK_PCLK_AUD_I2S>,
- <&cmu_aud CLK_SCLK_AUD_I2S>,
- <&cmu_aud CLK_SCLK_I2S_BCLK>;
+ <&cmu_aud CLK_SCLK_AUD_I2S>,
+ <&cmu_aud CLK_SCLK_I2S_BCLK>;
clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
#clock-cells = <1>;
pinctrl-names = "default";
@@ -1992,7 +2030,7 @@ serial_3: serial@11460000 {
reg = <0x11460000 0x100>;
interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu_aud CLK_PCLK_AUD_UART>,
- <&cmu_aud CLK_SCLK_AUD_UART>;
+ <&cmu_aud CLK_SCLK_AUD_UART>;
clock-names = "uart", "clk_uart_baud0";
pinctrl-names = "default";
pinctrl-0 = <&uart_aud_bus>;
@@ -2038,14 +2076,10 @@ pcie: pcie@15700000 {
timer: timer {
compatible = "arm,armv8-timer";
- interrupts = <GIC_PPI 13
- (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>,
- <GIC_PPI 14
- (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>,
- <GIC_PPI 11
- (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>,
- <GIC_PPI 10
- (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
};
};
diff --git a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
index c8925f4076b5..b3d5b447aeb6 100644
--- a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
+++ b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
@@ -99,8 +99,7 @@ pmic@66 {
s2mps15_osc: clocks {
compatible = "samsung,s2mps13-clk";
#clock-cells = <1>;
- clock-output-names = "s2mps13_ap", "s2mps13_cp",
- "s2mps13_bt";
+ clock-output-names = "s2mps13_ap", "s2mps13_cp", "s2mps13_bt";
};
regulators {
diff --git a/arch/arm64/boot/dts/exynos/exynos7-trip-points.dtsi b/arch/arm64/boot/dts/exynos/exynos7-trip-points.dtsi
index d3301b8bd364..ecae9550801c 100644
--- a/arch/arm64/boot/dts/exynos/exynos7-trip-points.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos7-trip-points.dtsi
@@ -12,36 +12,43 @@ cpu-alert-0 {
hysteresis = <10000>; /* millicelsius */
type = "passive";
};
+
cpu-alert-1 {
temperature = <80000>; /* millicelsius */
hysteresis = <10000>; /* millicelsius */
type = "passive";
};
+
cpu-alert-2 {
temperature = <85000>; /* millicelsius */
hysteresis = <10000>; /* millicelsius */
type = "passive";
};
+
cpu-alert-3 {
temperature = <90000>; /* millicelsius */
hysteresis = <10000>; /* millicelsius */
type = "passive";
};
+
cpu-alert-4 {
temperature = <95000>; /* millicelsius */
hysteresis = <10000>; /* millicelsius */
type = "passive";
};
+
cpu-alert-5 {
temperature = <100000>; /* millicelsius */
hysteresis = <10000>; /* millicelsius */
type = "passive";
};
+
cpu-alert-6 {
temperature = <110000>; /* millicelsius */
hysteresis = <10000>; /* millicelsius */
type = "passive";
};
+
cpu-crit-0 {
temperature = <115000>; /* millicelsius */
hysteresis = <0>; /* millicelsius */
diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi
index fa4e7d678423..a722d721a7c8 100644
--- a/arch/arm64/boot/dts/exynos/exynos7.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi
@@ -670,13 +670,13 @@ tmuctrl_0: tmu@10060000 {
ufs: ufs@15570000 {
compatible = "samsung,exynos7-ufs";
reg = <0x15570000 0x100>, /* 0: HCI standard */
- <0x15570100 0x100>, /* 1: Vendor specificed */
- <0x15571000 0x200>, /* 2: UNIPRO */
- <0x15572000 0x300>; /* 3: UFS protector */
+ <0x15570100 0x100>, /* 1: Vendor specificed */
+ <0x15571000 0x200>, /* 2: UNIPRO */
+ <0x15572000 0x300>; /* 3: UFS protector */
reg-names = "hci", "vs_hci", "unipro", "ufsp";
interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock_fsys1 ACLK_UFS20_LINK>,
- <&clock_fsys1 SCLK_UFSUNIPRO20_USER>;
+ <&clock_fsys1 SCLK_UFSUNIPRO20_USER>;
clock-names = "core_clk", "sclk_unipro_main";
freq-table-hz = <0 0>, <0 0>;
pinctrl-names = "default";
@@ -706,10 +706,10 @@ usbdrd_phy: phy@15500000 {
compatible = "samsung,exynos7-usbdrd-phy";
reg = <0x15500000 0x100>;
clocks = <&clock_fsys0 ACLK_USBDRD300>,
- <&clock_fsys0 OSCCLK_PHY_CLKOUT_USB30_PHY>,
- <&clock_fsys0 PHYCLK_USBDRD300_UDRD30_PHYCLK_USER>,
- <&clock_fsys0 PHYCLK_USBDRD300_UDRD30_PIPE_PCLK_USER>,
- <&clock_fsys0 SCLK_USBDRD300_REFCLK>;
+ <&clock_fsys0 OSCCLK_PHY_CLKOUT_USB30_PHY>,
+ <&clock_fsys0 PHYCLK_USBDRD300_UDRD30_PHYCLK_USER>,
+ <&clock_fsys0 PHYCLK_USBDRD300_UDRD30_PIPE_PCLK_USER>,
+ <&clock_fsys0 SCLK_USBDRD300_REFCLK>;
clock-names = "phy", "ref", "phy_utmi", "phy_pipe", "itp";
samsung,pmu-syscon = <&pmu_system_controller>;
#phy-cells = <1>;
@@ -718,10 +718,10 @@ usbdrd_phy: phy@15500000 {
usbdrd: usb@15400000 {
compatible = "samsung,exynos7-dwusb3";
clocks = <&clock_fsys0 ACLK_USBDRD300>,
- <&clock_fsys0 SCLK_USBDRD300_SUSPENDCLK>,
- <&clock_fsys0 ACLK_AXIUS_USBDRD30X_FSYS0X>;
+ <&clock_fsys0 SCLK_USBDRD300_SUSPENDCLK>,
+ <&clock_fsys0 ACLK_AXIUS_USBDRD30X_FSYS0X>;
clock-names = "usbdrd30", "usbdrd30_susp_clk",
- "usbdrd30_axius_clk";
+ "usbdrd30_axius_clk";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x15400000 0x10000>;
@@ -747,14 +747,10 @@ atlas_thermal: cluster0-thermal {
timer {
compatible = "arm,armv8-timer";
- interrupts = <GIC_PPI 13
- (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 14
- (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 11
- (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 10
- (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
};
};
diff --git a/arch/arm64/boot/dts/exynos/exynos7870-j6lte.dts b/arch/arm64/boot/dts/exynos/exynos7870-j6lte.dts
index de30d0970336..02bab3ab2711 100644
--- a/arch/arm64/boot/dts/exynos/exynos7870-j6lte.dts
+++ b/arch/arm64/boot/dts/exynos/exynos7870-j6lte.dts
@@ -398,8 +398,8 @@ accelerometer@1d {
pinctrl-0 = <&accel_irq>;
mount-matrix = "-1", "0", "0",
- "0", "1", "0",
- "0", "0", "-1";
+ "0", "1", "0",
+ "0", "0", "-1";
st,drdy-int-pin = <1>;
};
diff --git a/arch/arm64/boot/dts/exynos/exynos7870.dtsi b/arch/arm64/boot/dts/exynos/exynos7870.dtsi
index 19f9ae783587..9e3ec6c952f0 100644
--- a/arch/arm64/boot/dts/exynos/exynos7870.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos7870.dtsi
@@ -36,12 +36,15 @@ cluster0 {
core0 {
cpu = <&cpu0>;
};
+
core1 {
cpu = <&cpu1>;
};
+
core2 {
cpu = <&cpu2>;
};
+
core3 {
cpu = <&cpu3>;
};
@@ -51,12 +54,15 @@ cluster1 {
core0 {
cpu = <&cpu4>;
};
+
core1 {
cpu = <&cpu5>;
};
+
core2 {
cpu = <&cpu6>;
};
+
core3 {
cpu = <&cpu7>;
};
@@ -201,8 +207,7 @@ gic: interrupt-controller@104e1000 {
<0x104e2000 0x1000>,
<0x104e4000 0x2000>,
<0x104e6000 0x2000>;
- interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) |
- IRQ_TYPE_LEVEL_HIGH)>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <3>;
diff --git a/arch/arm64/boot/dts/exynos/exynos7885.dtsi b/arch/arm64/boot/dts/exynos/exynos7885.dtsi
index 7d7d56206b86..6b994b487107 100644
--- a/arch/arm64/boot/dts/exynos/exynos7885.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos7885.dtsi
@@ -56,18 +56,23 @@ cluster0 {
core0 {
cpu = <&cpu0>;
};
+
core1 {
cpu = <&cpu1>;
};
+
core2 {
cpu = <&cpu2>;
};
+
core3 {
cpu = <&cpu3>;
};
+
core4 {
cpu = <&cpu4>;
};
+
core5 {
cpu = <&cpu5>;
};
@@ -77,6 +82,7 @@ cluster1 {
core0 {
cpu = <&cpu6>;
};
+
core1 {
cpu = <&cpu7>;
};
@@ -186,8 +192,7 @@ gic: interrupt-controller@12301000 {
<0x12302000 0x2000>,
<0x12304000 0x2000>,
<0x12306000 0x2000>;
- interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) |
- IRQ_TYPE_LEVEL_HIGH)>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
};
cmu_peri: clock-controller@10010000 {
diff --git a/arch/arm64/boot/dts/exynos/exynos850-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos850-pinctrl.dtsi
index 424bc80bde68..e3f1ae8dedbf 100644
--- a/arch/arm64/boot/dts/exynos/exynos850-pinctrl.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos850-pinctrl.dtsi
@@ -509,6 +509,7 @@ gpp0: gpp0-gpio-bank {
interrupt-controller;
#interrupt-cells = <2>;
};
+
gpp1: gpp1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
diff --git a/arch/arm64/boot/dts/exynos/exynos850.dtsi b/arch/arm64/boot/dts/exynos/exynos850.dtsi
index 8abf7c9eac9e..911643008b9f 100644
--- a/arch/arm64/boot/dts/exynos/exynos850.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos850.dtsi
@@ -61,12 +61,15 @@ cluster0 {
core0 {
cpu = <&cpu0>;
};
+
core1 {
cpu = <&cpu1>;
};
+
core2 {
cpu = <&cpu2>;
};
+
core3 {
cpu = <&cpu3>;
};
@@ -76,12 +79,15 @@ cluster1 {
core0 {
cpu = <&cpu4>;
};
+
core1 {
cpu = <&cpu5>;
};
+
core2 {
cpu = <&cpu6>;
};
+
core3 {
cpu = <&cpu7>;
};
@@ -96,24 +102,28 @@ cpu0: cpu@0 {
clocks = <&cmu_cpucl0 CLK_CLUSTER0_SCLK>;
clock-names = "cluster0_clk";
};
+
cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a55";
reg = <0x1>;
enable-method = "psci";
};
+
cpu2: cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a55";
reg = <0x2>;
enable-method = "psci";
};
+
cpu3: cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a55";
reg = <0x3>;
enable-method = "psci";
};
+
cpu4: cpu@100 {
device_type = "cpu";
compatible = "arm,cortex-a55";
@@ -122,18 +132,21 @@ cpu4: cpu@100 {
clocks = <&cmu_cpucl1 CLK_CLUSTER1_SCLK>;
clock-names = "cluster1_clk";
};
+
cpu5: cpu@101 {
device_type = "cpu";
compatible = "arm,cortex-a55";
reg = <0x101>;
enable-method = "psci";
};
+
cpu6: cpu@102 {
device_type = "cpu";
compatible = "arm,cortex-a55";
reg = <0x102>;
enable-method = "psci";
};
+
cpu7: cpu@103 {
device_type = "cpu";
compatible = "arm,cortex-a55";
@@ -207,8 +220,7 @@ gic: interrupt-controller@12a01000 {
<0x12a04000 0x2000>,
<0x12a06000 0x2000>;
interrupt-controller;
- interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) |
- IRQ_TYPE_LEVEL_HIGH)>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
};
pmu_system_controller: system-controller@11860000 {
diff --git a/arch/arm64/boot/dts/exynos/exynos8855.dtsi b/arch/arm64/boot/dts/exynos/exynos8855.dtsi
index 9d82fceb5130..0333b80eba84 100644
--- a/arch/arm64/boot/dts/exynos/exynos8855.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos8855.dtsi
@@ -42,12 +42,15 @@ cluster0 {
core0 {
cpu = <&cpu0>;
};
+
core1 {
cpu = <&cpu1>;
};
+
core2 {
cpu = <&cpu2>;
};
+
core3 {
cpu = <&cpu3>;
};
@@ -57,9 +60,11 @@ cluster1 {
core0 {
cpu = <&cpu4>;
};
+
core1 {
cpu = <&cpu5>;
};
+
core2 {
cpu = <&cpu6>;
};
diff --git a/arch/arm64/boot/dts/exynos/exynos8895.dtsi b/arch/arm64/boot/dts/exynos/exynos8895.dtsi
index e3b6d37aac09..a9a6f6970d71 100644
--- a/arch/arm64/boot/dts/exynos/exynos8895.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos8895.dtsi
@@ -35,12 +35,15 @@ cluster0 {
core0 {
cpu = <&cpu0>;
};
+
core1 {
cpu = <&cpu1>;
};
+
core2 {
cpu = <&cpu2>;
};
+
core3 {
cpu = <&cpu3>;
};
@@ -50,12 +53,15 @@ cluster1 {
core0 {
cpu = <&cpu4>;
};
+
core1 {
cpu = <&cpu5>;
};
+
core2 {
cpu = <&cpu6>;
};
+
core3 {
cpu = <&cpu7>;
};
@@ -207,8 +213,7 @@ gic: interrupt-controller@10201000 {
<0x10206000 0x2000>;
#interrupt-cells = <3>;
interrupt-controller;
- interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) |
- IRQ_TYPE_LEVEL_HIGH)>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
#address-cells = <0>;
#size-cells = <1>;
};
diff --git a/arch/arm64/boot/dts/exynos/exynos9810.dtsi b/arch/arm64/boot/dts/exynos/exynos9810.dtsi
index 01eba31f7ca3..4f1f1e9a41b2 100644
--- a/arch/arm64/boot/dts/exynos/exynos9810.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos9810.dtsi
@@ -36,12 +36,15 @@ cluster0 {
core0 {
cpu = <&cpu0>;
};
+
core1 {
cpu = <&cpu1>;
};
+
core2 {
cpu = <&cpu2>;
};
+
core3 {
cpu = <&cpu3>;
};
@@ -51,12 +54,15 @@ cluster1 {
core0 {
cpu = <&cpu4>;
};
+
core1 {
cpu = <&cpu5>;
};
+
core2 {
cpu = <&cpu6>;
};
+
core3 {
cpu = <&cpu7>;
};
@@ -179,8 +185,7 @@ gic: interrupt-controller@10101000 {
<0x10106000 0x2000>;
#interrupt-cells = <3>;
interrupt-controller;
- interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) |
- IRQ_TYPE_LEVEL_HIGH)>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
#address-cells = <0>;
#size-cells = <1>;
};
diff --git a/arch/arm64/boot/dts/exynos/exynos990.dtsi b/arch/arm64/boot/dts/exynos/exynos990.dtsi
index c15ccaff2666..8115d581b173 100644
--- a/arch/arm64/boot/dts/exynos/exynos990.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos990.dtsi
@@ -243,8 +243,7 @@ gic: interrupt-controller@10101000 {
<0x10106000 0x2000>;
#interrupt-cells = <3>;
interrupt-controller;
- interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) |
- IRQ_TYPE_LEVEL_HIGH)>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
#address-cells = <0>;
#size-cells = <1>;
};
diff --git a/arch/arm64/boot/dts/exynos/exynosautov9.dtsi b/arch/arm64/boot/dts/exynos/exynosautov9.dtsi
index 94f8d1c47676..9c140ca261a2 100644
--- a/arch/arm64/boot/dts/exynos/exynosautov9.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynosautov9.dtsi
@@ -51,12 +51,15 @@ cluster0 {
core0 {
cpu = <&cpu0>;
};
+
core1 {
cpu = <&cpu1>;
};
+
core2 {
cpu = <&cpu2>;
};
+
core3 {
cpu = <&cpu3>;
};
@@ -66,12 +69,15 @@ cluster1 {
core0 {
cpu = <&cpu4>;
};
+
core1 {
cpu = <&cpu5>;
};
+
core2 {
cpu = <&cpu6>;
};
+
core3 {
cpu = <&cpu7>;
};
@@ -338,8 +344,7 @@ gic: interrupt-controller@10101000 {
<0x10102000 0x2000>,
<0x10104000 0x2000>,
<0x10106000 0x2000>;
- interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) |
- IRQ_TYPE_LEVEL_HIGH)>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
};
pdma0: dma-controller@1b2e0000 {
diff --git a/arch/arm64/boot/dts/exynos/exynosautov920.dtsi b/arch/arm64/boot/dts/exynos/exynosautov920.dtsi
index f42207bdc701..399b56b4dbdd 100644
--- a/arch/arm64/boot/dts/exynos/exynosautov920.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynosautov920.dtsi
@@ -48,12 +48,15 @@ cluster0 {
core0 {
cpu = <&cpu0>;
};
+
core1 {
cpu = <&cpu1>;
};
+
core2 {
cpu = <&cpu2>;
};
+
core3 {
cpu = <&cpu3>;
};
@@ -63,12 +66,15 @@ cluster1 {
core0 {
cpu = <&cpu4>;
};
+
core1 {
cpu = <&cpu5>;
};
+
core2 {
cpu = <&cpu6>;
};
+
core3 {
cpu = <&cpu7>;
};
@@ -78,6 +84,7 @@ cluster2 {
core0 {
cpu = <&cpu8>;
};
+
core1 {
cpu = <&cpu9>;
};
--
2.53.0
next prev parent reply other threads:[~2026-07-26 18:15 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-26 17:43 [PATCH 0/8] arm64: dts: exynos/google/fsd: Trivial white-space changes to adjust to DTS coding style Krzysztof Kozlowski
2026-07-26 17:43 ` [PATCH 1/8] arm64: dts: exynos: Move 'status' to the end to match " Krzysztof Kozlowski
2026-07-27 11:04 ` André Draszik
2026-07-27 11:10 ` Krzysztof Kozlowski
2026-07-26 17:43 ` Krzysztof Kozlowski [this message]
2026-07-27 11:15 ` [PATCH 2/8] arm64: dts: exynos: Align continued properties and add missing blank lines André Draszik
2026-07-26 17:43 ` [PATCH 3/8] arm64: dts: exynos5433: Override thermal zones by phandle Krzysztof Kozlowski
2026-07-27 11:06 ` André Draszik
2026-07-26 17:43 ` [PATCH 4/8] arm64: dts: exynos: Re-order clocks and align continued properties Krzysztof Kozlowski
2026-07-27 11:18 ` André Draszik
2026-07-26 17:43 ` [PATCH 5/8] arm64: dts: google: Move 'status' to the end to match coding style Krzysztof Kozlowski
2026-07-27 11:08 ` André Draszik
2026-07-26 17:43 ` [PATCH 6/8] arm64: dts: google: Align continued properties and add missing blank lines Krzysztof Kozlowski
2026-07-27 11:10 ` André Draszik
2026-07-26 17:43 ` [PATCH 7/8] arm64: dts: fsd: Move 'status' to the end to match coding style Krzysztof Kozlowski
2026-07-27 11:10 ` André Draszik
2026-07-26 17:43 ` [PATCH 8/8] arm64: dts: fsd: Align continued properties and add missing blank lines Krzysztof Kozlowski
2026-07-27 11:19 ` André Draszik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260726-b4-dts-coding-style-strict-v1-2-e9e3e9879d05@oss.qualcomm.com \
--to=krzysztof.kozlowski@oss.qualcomm.com \
--cc=alim.akhtar@samsung.com \
--cc=andre.draszik@linaro.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=ivo.ivanov.ivanov1@gmail.com \
--cc=krzk+dt@kernel.org \
--cc=krzk@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-fsd@tesla.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=peter.griffin@linaro.org \
--cc=robh@kernel.org \
--cc=semen.protsenko@linaro.org \
--cc=tudor.ambarus@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox