[PATCH 3/3] arm64: dts: amlogic: add support for Orbbec Zora P1

[Alberto Robazza <robazzalberto@gmail.com>]

From: Alberto Robazza <robazza.alberto@proton.me>

The Orbbec Zora P1 is an A311D (Meson G12B) board with 2/4 GiB DDR4,
an Ampak AP6256 combo module (Broadcom BCM43456 Wi-Fi over SDIO and
BCM4345C5 Bluetooth over UART_A), HDMI audio output.

According to the original Linux dts, the board is a modded version
of the ODROID-N2, with Amlogic A311D instead of the original S922X
and WiFi and Bluetooth support.
So the device tree builds on meson-g12b-a311d.dtsi and
meson-g12b-odroid-n2.dtsi (using same vddcpu values of N2+),
extended with the board-specific GPIO wiring for the AP6256 handling,
and some modifications for the led, GPIO_ACTIVE_LOW instead of
GPIO_ACTIVE_HIGH and different label (it is a green led, not blue as
in the Odroid N2).

Add the "orbbec,zora-p1" compatible to the amlogic.yaml board binding
(the "orbbec" vendor prefix is already registered) and the new DTB to
the Makefile.

Signed-off-by: Alberto Robazza <robazza.alberto@proton.me>
---
 arch/arm64/boot/dts/amlogic/Makefile          |   1 +
 .../boot/dts/amlogic/meson-g12b-zora-p1.dts   | 103 ++++++++++++++++++
 2 files changed, 104 insertions(+)
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12b-zora-p1.dts

diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index 57bc440fa..95e9071e0 100644
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -36,6 +36,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-g12b-odroid-go-ultra.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-g12b-odroid-n2-plus.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-g12b-odroid-n2.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-g12b-odroid-n2l.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-g12b-zora-p1.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-g12b-radxa-zero2.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-g12b-s922x-bananapi-m2s.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-g12b-s922x-khadas-vim3.dtb
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-zora-p1.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-zora-p1.dts
new file mode 100644
index 000000000..fe20d39a8
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-zora-p1.dts
@@ -0,0 +1,103 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2026 Alberto Robazza <robazza.alberto@proton.me>
+ */
+
+/dts-v1/;
+
+#include "meson-g12b-a311d.dtsi"
+#include "meson-g12b-odroid-n2.dtsi"
+
+/ {
+	compatible = "orbbec,zora-p1", "amlogic,a311d", "amlogic,g12b";
+	model = "Orbbec Zora P1";
+
+	leds {
+		//The status led on Zora is actually green, same pin as N2, but reversed polarity
+		led-blue {
+			label = "p1:green";
+			gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_16 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+
+	wifi32k: wifi32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>;
+	};
+
+	sound {
+		model = "ZORA-P1";
+	};
+};
+
+&pwm_ef {
+	status = "okay";
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+};
+
+/* AP6256 Wi-Fi: Broadcom BCM43456 over SDIO. */
+&sd_emmc_a {
+	status = "okay";
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <100000000>;
+	non-removable;
+	disable-wp;
+	keep-power-in-suspend;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+	vmmc-supply = <&tflash_vdd>;
+	vqmmc-supply = <&vddao_1v8>;
+
+	wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+	};
+};
+
+/* AP6256 Bluetooth: Broadcom BCM4345C5 over UART_A. */
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm4345c5";
+		shutdown-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+		clocks = <&wifi32k>;
+		clock-names = "lpo";
+	};
+};
+
+//vddcpu regulators same as Odroid N2+
+&vddcpu_a {
+	regulator-min-microvolt = <680000>;
+	regulator-max-microvolt = <1040000>;
+
+	pwms = <&pwm_ab 0 1500 0>;
+};
+
+&vddcpu_b {
+	regulator-min-microvolt = <680000>;
+	regulator-max-microvolt = <1040000>;
+
+	pwms = <&pwm_AO_cd 1 1500 0>;
+};
-- 
2.55.0