From: Xueyuan Chen <xueyuan.chen21@gmail.com>
To: linux-mm@kvack.org, akpm@linux-foundation.org, david@kernel.org,
ljs@kernel.org
Cc: linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, catalin.marinas@arm.com,
will@kernel.org, tglx@kernel.org, mingo@redhat.com, bp@alien8.de,
dave.hansen@linux.intel.com, x86@kernel.org, hpa@zytor.com,
luto@kernel.org, peterz@infradead.org, lance.yang@linux.dev,
usama.arif@linux.dev, jannh@google.com,
yang@os.amperecomputing.com, rppt@kernel.org, ziy@nvidia.com,
baolin.wang@linux.alibaba.com, liam@infradead.org,
npache@redhat.com, ryan.roberts@arm.com, dev.jain@arm.com,
baohua@kernel.org
Subject: [PATCH v5 1/3] mm: make persistent huge zero folio read-only
Date: Mon, 27 Jul 2026 22:34:24 +0800 [thread overview]
Message-ID: <20260727143426.1077133-2-xueyuan.chen21@gmail.com> (raw)
In-Reply-To: <20260727143426.1077133-1-xueyuan.chen21@gmail.com>
The persistent huge zero folio is shared globally and should stay zero
after initialization. As Jann Horn pointed out[1], kernel bugs have ended
up writing to pages that were meant to be read-only, including in
security-sensitive cases. Making the persistent huge zero folio read-only
in the direct map turns such writes into faults instead of silent zero-page
corruption.
Add set_direct_map_ro_noflush() so mm code can make a direct-map range
read-only. Use an address-based signature to match ongoing direct-map
helper work[2], where existing page-based helpers may move the same way.
The helper is direct-map specific and leaves TLB invalidation to its
caller. Architectures without direct-map permission support keep existing
behavior through the generic stub.
The folio is allocated and zeroed through the writable direct map before
thp_shrinker_init() changes its permissions. thp_shrinker_init() is called
from hugepage_init(), which is registered as a subsys_initcall and runs
after SMP initialization. Stale writable kernel TLB entries may therefore
exist. Flush the direct-map range immediately after the page-table update
so they cannot bypass the read-only mapping.
Treat the direct-map permission change as best-effort. Architectures that
do not implement the helper keep the existing behavior via the generic
stub.
Inspired by Jann Horn's read-only zero page work[1] and follow-up
discussion[3] with Yang Shi.
[1] https://lore.kernel.org/linux-mm/20260508-ro-zeropage-v1-1-9808abc20b49@google.com/
[2] https://lore.kernel.org/linux-mm/0e5b23a6-4895-454a-9dfa-6dc21adc2991@kernel.org/
[3] https://lore.kernel.org/linux-mm/CAHbLzkrXXe7r3n3jXgDKtwZhRqj=jDx9E6dLOULohnhBguvi9A@mail.gmail.com/
Suggested-by: David Hildenbrand <david@kernel.org>
Suggested-by: Usama Arif <usama.arif@linux.dev>
Co-developed-by: Lance Yang <lance.yang@linux.dev>
Signed-off-by: Lance Yang <lance.yang@linux.dev>
Signed-off-by: Xueyuan Chen <xueyuan.chen21@gmail.com>
---
include/linux/set_memory.h | 29 +++++++++++++++++++++++++++++
mm/huge_memory.c | 16 +++++++++++++++-
2 files changed, 44 insertions(+), 1 deletion(-)
diff --git a/include/linux/set_memory.h b/include/linux/set_memory.h
index 3030d9245f5a..e83ced6a3827 100644
--- a/include/linux/set_memory.h
+++ b/include/linux/set_memory.h
@@ -40,6 +40,24 @@ static inline int set_direct_map_valid_noflush(struct page *page,
return 0;
}
+/**
+ * set_direct_map_ro_noflush - make a direct-map range read-only
+ * @addr: start address in the direct map
+ * @nr_pages: number of pages starting at @addr
+ *
+ * Make the direct-map range starting at @addr read-only without invalidating
+ * TLBs. Callers must either ensure that no stale writable translations can
+ * be used, or treat the permission change as a best-effort hardening step.
+ *
+ * Return: 0 on success or when direct-map permission changes are unsupported,
+ * or a negative errno on failure.
+ */
+static inline int set_direct_map_ro_noflush(const void *addr,
+ unsigned long nr_pages)
+{
+ return 0;
+}
+
static inline bool kernel_page_present(struct page *page)
{
return true;
@@ -56,6 +74,17 @@ static inline bool can_set_direct_map(void)
}
#define can_set_direct_map can_set_direct_map
#endif
+
+#ifndef set_direct_map_ro_noflush
+/* See the comment above the generic fallback for the _noflush contract. */
+static inline int set_direct_map_ro_noflush(const void *addr,
+ unsigned long nr_pages)
+{
+ return 0;
+}
+
+#define set_direct_map_ro_noflush set_direct_map_ro_noflush
+#endif
#endif /* CONFIG_ARCH_HAS_SET_DIRECT_MAP */
#ifdef CONFIG_X86_64
diff --git a/mm/huge_memory.c b/mm/huge_memory.c
index 970e077019b7..4425ae5560cb 100644
--- a/mm/huge_memory.c
+++ b/mm/huge_memory.c
@@ -40,8 +40,10 @@
#include <linux/pgalloc.h>
#include <linux/pgalloc_tag.h>
#include <linux/pagewalk.h>
+#include <linux/set_memory.h>
#include <asm/tlb.h>
+#include <asm/tlbflush.h>
#include "internal.h"
#include "swap.h"
@@ -932,6 +934,8 @@ static int __init thp_shrinker_init(void)
shrinker_register(deferred_split_shrinker);
if (IS_ENABLED(CONFIG_PERSISTENT_HUGE_ZERO_FOLIO)) {
+ unsigned long addr;
+
/*
* Bump the reference of the huge_zero_folio and do not
* initialize the shrinker.
@@ -940,8 +944,18 @@ static int __init thp_shrinker_init(void)
* that get_huge_zero_folio() will most likely not fail as
* thp_shrinker_init() is invoked early on during boot.
*/
- if (!get_huge_zero_folio())
+ if (!get_huge_zero_folio()) {
pr_warn("Allocating persistent huge zero folio failed\n");
+ return 0;
+ }
+
+ addr = (unsigned long)folio_address(huge_zero_folio);
+ /*
+ * The folio was zeroed through the writable direct map. Flush
+ * after the page-table update to invalidate stale translations.
+ */
+ set_direct_map_ro_noflush((void *)addr, HPAGE_PMD_NR);
+ flush_tlb_kernel_range(addr, addr + HPAGE_PMD_SIZE);
return 0;
}
--
2.47.3
next prev parent reply other threads:[~2026-07-27 14:35 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-27 14:34 [PATCH v5 0/3] mm: make persistent huge zero folio read-only Xueyuan Chen
2026-07-27 14:34 ` Xueyuan Chen [this message]
2026-07-27 14:34 ` [PATCH v5 2/3] arm64/mm: add set_direct_map_ro_noflush() Xueyuan Chen
2026-07-27 14:34 ` [PATCH v5 3/3] x86/mm: " Xueyuan Chen
2026-07-27 18:35 ` [PATCH v5 0/3] mm: make persistent huge zero folio read-only Andrew Morton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260727143426.1077133-2-xueyuan.chen21@gmail.com \
--to=xueyuan.chen21@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=baohua@kernel.org \
--cc=baolin.wang@linux.alibaba.com \
--cc=bp@alien8.de \
--cc=catalin.marinas@arm.com \
--cc=dave.hansen@linux.intel.com \
--cc=david@kernel.org \
--cc=dev.jain@arm.com \
--cc=hpa@zytor.com \
--cc=jannh@google.com \
--cc=lance.yang@linux.dev \
--cc=liam@infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=ljs@kernel.org \
--cc=luto@kernel.org \
--cc=mingo@redhat.com \
--cc=npache@redhat.com \
--cc=peterz@infradead.org \
--cc=rppt@kernel.org \
--cc=ryan.roberts@arm.com \
--cc=tglx@kernel.org \
--cc=usama.arif@linux.dev \
--cc=will@kernel.org \
--cc=x86@kernel.org \
--cc=yang@os.amperecomputing.com \
--cc=ziy@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox