Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Yu-Chun Lin <eleanor.lin@realtek.com>
To: <mturquette@baylibre.com>, <sboyd@kernel.org>, <robh@kernel.org>,
	<krzk+dt@kernel.org>, <conor+dt@kernel.org>,
	<p.zabel@pengutronix.de>, <cylee12@realtek.com>,
	<jyanchou@realtek.com>, <bmasney@redhat.com>
Cc: <afaerber@suse.com>, <devicetree@vger.kernel.org>,
	<linux-clk@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-realtek-soc@lists.infradead.org>, <james.tai@realtek.com>,
	<cy.huang@realtek.com>, <stanley_chang@realtek.com>,
	<eleanor.lin@realtek.com>
Subject: [PATCH v11 03/11] reset: realtek: Add RTD1625 reset controller driver
Date: Tue, 28 Jul 2026 22:27:58 +0800	[thread overview]
Message-ID: <20260728142806.1954638-4-eleanor.lin@realtek.com> (raw)
In-Reply-To: <20260728142806.1954638-1-eleanor.lin@realtek.com>

From: Cheng-Yu Lee <cylee12@realtek.com>

Add support for the CRT (Clock, Reset, and Test) and ISO (Isolation)domain
reset controller on the Realtek RTD1625 SoC.

The reset controller shares the same register space with the CRT and ISO
clock controller. To handle this shared register space, the reset driver is
implemented as an auxiliary driver. It will be instantiated and probed via
the auxiliary bus by the RTD1625-CRT and RTD1625-ISO clock controller driver.

Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Cheng-Yu Lee <cylee12@realtek.com>
Co-developed-by: Yu-Chun Lin <eleanor.lin@realtek.com>
Signed-off-by: Yu-Chun Lin <eleanor.lin@realtek.com>
---
Changes in v11:
- Remove unnecessary whitespace.
- Replace dev->parent->of_node with dev->of_node.
- Add Reviewed-by tag from Philipp.
---
 drivers/reset/realtek/Kconfig         |  11 ++
 drivers/reset/realtek/Makefile        |   1 +
 drivers/reset/realtek/reset-rtd1625.c | 262 ++++++++++++++++++++++++++
 3 files changed, 274 insertions(+)
 create mode 100644 drivers/reset/realtek/reset-rtd1625.c

diff --git a/drivers/reset/realtek/Kconfig b/drivers/reset/realtek/Kconfig
index 5ddf8e5c09c7..38591b6a70b3 100644
--- a/drivers/reset/realtek/Kconfig
+++ b/drivers/reset/realtek/Kconfig
@@ -6,3 +6,14 @@ config RESET_RTK_COMMON
 	  Realtek SoCs. It provides shared reset control operations
 	  (assert, deassert, status) that other Realtek-specific reset
 	  drivers can use.
+
+config RESET_RTD1625
+	tristate "RTD1625 Reset Controller"
+	depends on ARCH_REALTEK || COMPILE_TEST
+	select RESET_RTK_COMMON
+	select AUXILIARY_BUS
+	help
+	  This enables the reset controller driver for Realtek RTD1625 SoC.
+	  The driver controls reset lines for various peripherals including
+	  PCIe, SATA, HDMI, display, video encoder/decoder, USB, SD, audio,
+	  and other subsystems.
diff --git a/drivers/reset/realtek/Makefile b/drivers/reset/realtek/Makefile
index 6d68e41748bf..993acd1e2d14 100644
--- a/drivers/reset/realtek/Makefile
+++ b/drivers/reset/realtek/Makefile
@@ -1,2 +1,3 @@
 # SPDX-License-Identifier: GPL-2.0-only
 obj-$(CONFIG_RESET_RTK_COMMON) += reset-rtk-common.o
+obj-$(CONFIG_RESET_RTD1625) += reset-rtd1625.o
diff --git a/drivers/reset/realtek/reset-rtd1625.c b/drivers/reset/realtek/reset-rtd1625.c
new file mode 100644
index 000000000000..fa87462f50e9
--- /dev/null
+++ b/drivers/reset/realtek/reset-rtd1625.c
@@ -0,0 +1,262 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2026 Realtek Semiconductor Corporation
+ */
+
+#include <dt-bindings/reset/realtek,rtd1625.h>
+#include <linux/auxiliary_bus.h>
+#include <linux/array_size.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include "reset-rtk-common.h"
+
+struct rtd1625_reset_info {
+	const struct rtk_reset_desc *descs;
+	unsigned int nr_resets;
+};
+
+static const struct rtk_reset_desc rtd1625_crt_reset_descs[] = {
+	/* Bank 0: offset 0x0 */
+	[RTD1625_CRT_RSTN_MISC]         = { .ofs = 0x0, .bit = 0,  .write_en = 1 },
+	[RTD1625_CRT_RSTN_DIP]          = { .ofs = 0x0, .bit = 2,  .write_en = 1 },
+	[RTD1625_CRT_RSTN_GSPI]         = { .ofs = 0x0, .bit = 4,  .write_en = 1 },
+	[RTD1625_CRT_RSTN_SDS]          = { .ofs = 0x0, .bit = 6,  .write_en = 1 },
+	[RTD1625_CRT_RSTN_SDS_REG]      = { .ofs = 0x0, .bit = 8,  .write_en = 1 },
+	[RTD1625_CRT_RSTN_SDS_PHY]      = { .ofs = 0x0, .bit = 10, .write_en = 1 },
+	[RTD1625_CRT_RSTN_GPU2D]        = { .ofs = 0x0, .bit = 12, .write_en = 1 },
+	[RTD1625_CRT_RSTN_DC_PHY]       = { .ofs = 0x0, .bit = 22, .write_en = 1 },
+	[RTD1625_CRT_RSTN_DCPHY_CRT]    = { .ofs = 0x0, .bit = 24, .write_en = 1 },
+	[RTD1625_CRT_RSTN_LSADC]        = { .ofs = 0x0, .bit = 26, .write_en = 1 },
+	[RTD1625_CRT_RSTN_SE]           = { .ofs = 0x0, .bit = 28, .write_en = 1 },
+	[RTD1625_CRT_RSTN_DLA]          = { .ofs = 0x0, .bit = 30, .write_en = 1 },
+	/* Bank 1: offset 0x4 */
+	[RTD1625_CRT_RSTN_JPEG]         = { .ofs = 0x4, .bit = 0,  .write_en = 1 },
+	[RTD1625_CRT_RSTN_SD]           = { .ofs = 0x4, .bit = 2,  .write_en = 1 },
+	[RTD1625_CRT_RSTN_SDIO]         = { .ofs = 0x4, .bit = 6,  .write_en = 1 },
+	[RTD1625_CRT_RSTN_PCR_CNT]      = { .ofs = 0x4, .bit = 8,  .write_en = 1 },
+	[RTD1625_CRT_RSTN_PCIE0_STITCH] = { .ofs = 0x4, .bit = 10, .write_en = 1 },
+	[RTD1625_CRT_RSTN_PCIE0_PHY]    = { .ofs = 0x4, .bit = 12, .write_en = 1 },
+	[RTD1625_CRT_RSTN_PCIE0]        = { .ofs = 0x4, .bit = 14, .write_en = 1 },
+	[RTD1625_CRT_RSTN_PCIE0_CORE]   = { .ofs = 0x4, .bit = 16, .write_en = 1 },
+	[RTD1625_CRT_RSTN_PCIE0_POWER]  = { .ofs = 0x4, .bit = 18, .write_en = 1 },
+	[RTD1625_CRT_RSTN_PCIE0_NONSTICH] = { .ofs = 0x4, .bit = 20, .write_en = 1 },
+	[RTD1625_CRT_RSTN_PCIE0_PHY_MDIO] = { .ofs = 0x4, .bit = 22, .write_en = 1 },
+	[RTD1625_CRT_RSTN_PCIE0_SGMII_MDIO] = { .ofs = 0x4, .bit = 24, .write_en = 1 },
+	[RTD1625_CRT_RSTN_VO2]          = { .ofs = 0x4, .bit = 28, .write_en = 1 },
+	[RTD1625_CRT_RSTN_MISC_SC0]     = { .ofs = 0x4, .bit = 30, .write_en = 1 },
+	/* Bank 2: offset 0x8 */
+	[RTD1625_CRT_RSTN_MD]           = { .ofs = 0x8, .bit = 4,  .write_en = 1 },
+	[RTD1625_CRT_RSTN_LVDS1]        = { .ofs = 0x8, .bit = 6,  .write_en = 1 },
+	[RTD1625_CRT_RSTN_LVDS2]        = { .ofs = 0x8, .bit = 8,  .write_en = 1 },
+	[RTD1625_CRT_RSTN_MISC_SC1]     = { .ofs = 0x8, .bit = 10, .write_en = 1 },
+	[RTD1625_CRT_RSTN_I2C_3]        = { .ofs = 0x8, .bit = 12, .write_en = 1 },
+	[RTD1625_CRT_RSTN_FAN]          = { .ofs = 0x8, .bit = 14, .write_en = 1 },
+	[RTD1625_CRT_RSTN_TVE]          = { .ofs = 0x8, .bit = 16, .write_en = 1 },
+	[RTD1625_CRT_RSTN_AIO]          = { .ofs = 0x8, .bit = 18, .write_en = 1 },
+	[RTD1625_CRT_RSTN_VO]           = { .ofs = 0x8, .bit = 20, .write_en = 1 },
+	[RTD1625_CRT_RSTN_MIPI_CSI]     = { .ofs = 0x8, .bit = 22, .write_en = 1 },
+	[RTD1625_CRT_RSTN_HDMIRX]       = { .ofs = 0x8, .bit = 24, .write_en = 1 },
+	[RTD1625_CRT_RSTN_HDMIRX_WRAP]  = { .ofs = 0x8, .bit = 26, .write_en = 1 },
+	[RTD1625_CRT_RSTN_HDMI]         = { .ofs = 0x8, .bit = 28, .write_en = 1 },
+	[RTD1625_CRT_RSTN_DISP]         = { .ofs = 0x8, .bit = 30, .write_en = 1 },
+	/* Bank 3: offset 0xc */
+	[RTD1625_CRT_RSTN_SATA_PHY_POW1] = { .ofs = 0xc, .bit = 0,  .write_en = 1 },
+	[RTD1625_CRT_RSTN_SATA_PHY_POW0] = { .ofs = 0xc, .bit = 2,  .write_en = 1 },
+	[RTD1625_CRT_RSTN_SATA_MDIO1]   = { .ofs = 0xc, .bit = 4,  .write_en = 1 },
+	[RTD1625_CRT_RSTN_SATA_MDIO0]   = { .ofs = 0xc, .bit = 6,  .write_en = 1 },
+	[RTD1625_CRT_RSTN_SATA_WRAP]    = { .ofs = 0xc, .bit = 8,  .write_en = 1 },
+	[RTD1625_CRT_RSTN_SATA_MAC_P1]  = { .ofs = 0xc, .bit = 10, .write_en = 1 },
+	[RTD1625_CRT_RSTN_SATA_MAC_P0]  = { .ofs = 0xc, .bit = 12, .write_en = 1 },
+	[RTD1625_CRT_RSTN_SATA_MAC_COM] = { .ofs = 0xc, .bit = 14, .write_en = 1 },
+	[RTD1625_CRT_RSTN_PCIE1_STITCH] = { .ofs = 0xc, .bit = 16, .write_en = 1 },
+	[RTD1625_CRT_RSTN_PCIE1_PHY]     = { .ofs = 0xc, .bit = 18, .write_en = 1 },
+	[RTD1625_CRT_RSTN_PCIE1]         = { .ofs = 0xc, .bit = 20, .write_en = 1 },
+	[RTD1625_CRT_RSTN_PCIE1_CORE]   = { .ofs = 0xc, .bit = 22, .write_en = 1 },
+	[RTD1625_CRT_RSTN_PCIE1_POWER]  = { .ofs = 0xc, .bit = 24, .write_en = 1 },
+	[RTD1625_CRT_RSTN_PCIE1_NONSTICH] = { .ofs = 0xc, .bit = 26, .write_en = 1 },
+	[RTD1625_CRT_RSTN_PCIE1_PHY_MDIO] = { .ofs = 0xc, .bit = 28, .write_en = 1 },
+	[RTD1625_CRT_RSTN_HDMITOP]      = { .ofs = 0xc, .bit = 30, .write_en = 1 },
+	/* Bank 4: offset 0x68 */
+	[RTD1625_CRT_RSTN_I2C_4]        = { .ofs = 0x68, .bit = 2,  .write_en = 1 },
+	[RTD1625_CRT_RSTN_I2C_5]        = { .ofs = 0x68, .bit = 4,  .write_en = 1 },
+	[RTD1625_CRT_RSTN_TSIO]         = { .ofs = 0x68, .bit = 6,  .write_en = 1 },
+	[RTD1625_CRT_RSTN_VI]           = { .ofs = 0x68, .bit = 8,  .write_en = 1 },
+	[RTD1625_CRT_RSTN_EDP]          = { .ofs = 0x68, .bit = 10, .write_en = 1 },
+	[RTD1625_CRT_RSTN_VE1_MMU]      = { .ofs = 0x68, .bit = 12, .write_en = 1 },
+	[RTD1625_CRT_RSTN_VE1_MMU_FUNC] = { .ofs = 0x68, .bit = 14, .write_en = 1 },
+	[RTD1625_CRT_RSTN_HSE_MMU]      = { .ofs = 0x68, .bit = 16, .write_en = 1 },
+	[RTD1625_CRT_RSTN_HSE_MMU_FUNC] = { .ofs = 0x68, .bit = 18, .write_en = 1 },
+	[RTD1625_CRT_RSTN_MDLM2M]       = { .ofs = 0x68, .bit = 20, .write_en = 1 },
+	[RTD1625_CRT_RSTN_ISO_GSPI]     = { .ofs = 0x68, .bit = 22, .write_en = 1 },
+	[RTD1625_CRT_RSTN_SOFT_NPU]     = { .ofs = 0x68, .bit = 24, .write_en = 1 },
+	[RTD1625_CRT_RSTN_SPI2EMMC]     = { .ofs = 0x68, .bit = 26, .write_en = 1 },
+	[RTD1625_CRT_RSTN_EARC]         = { .ofs = 0x68, .bit = 28, .write_en = 1 },
+	[RTD1625_CRT_RSTN_VE1]          = { .ofs = 0x68, .bit = 30, .write_en = 1 },
+	/* Bank 5: offset 0x90 */
+	[RTD1625_CRT_RSTN_PCIE2_STITCH]  = { .ofs = 0x90, .bit = 0,  .write_en = 1 },
+	[RTD1625_CRT_RSTN_PCIE2_PHY]    = { .ofs = 0x90, .bit = 2,  .write_en = 1 },
+	[RTD1625_CRT_RSTN_PCIE2]        = { .ofs = 0x90, .bit = 4,  .write_en = 1 },
+	[RTD1625_CRT_RSTN_PCIE2_CORE]   = { .ofs = 0x90, .bit = 6,  .write_en = 1 },
+	[RTD1625_CRT_RSTN_PCIE2_POWER]  = { .ofs = 0x90, .bit = 8,  .write_en = 1 },
+	[RTD1625_CRT_RSTN_PCIE2_NONSTICH] = { .ofs = 0x90, .bit = 10, .write_en = 1 },
+	[RTD1625_CRT_RSTN_PCIE2_PHY_MDIO] = { .ofs = 0x90, .bit = 12, .write_en = 1 },
+	[RTD1625_CRT_RSTN_DCPHY_UMCTL2] = { .ofs = 0x90, .bit = 14, .write_en = 1 },
+	[RTD1625_CRT_RSTN_MIPI_DSI]     = { .ofs = 0x90, .bit = 16, .write_en = 1 },
+	[RTD1625_CRT_RSTN_HIFM]         = { .ofs = 0x90, .bit = 18, .write_en = 1 },
+	[RTD1625_CRT_RSTN_NSRAM]        = { .ofs = 0x90, .bit = 20, .write_en = 1 },
+	[RTD1625_CRT_RSTN_AUCPU0_REG]   = { .ofs = 0x90, .bit = 22, .write_en = 1 },
+	[RTD1625_CRT_RSTN_MDL_GENPW]    = { .ofs = 0x90, .bit = 24, .write_en = 1 },
+	[RTD1625_CRT_RSTN_MDL_CHIP]     = { .ofs = 0x90, .bit = 26, .write_en = 1 },
+	[RTD1625_CRT_RSTN_MDL_IP]       = { .ofs = 0x90, .bit = 28, .write_en = 1 },
+	[RTD1625_CRT_RSTN_TEST_MUX]     = { .ofs = 0x90, .bit = 30, .write_en = 1 },
+	/* Bank 6: offset 0xb8 */
+	[RTD1625_CRT_RSTN_ISO_BIST]     = { .ofs = 0xb8, .bit = 0,  .write_en = 1 },
+	[RTD1625_CRT_RSTN_MAIN_BIST]    = { .ofs = 0xb8, .bit = 2,  .write_en = 1 },
+	[RTD1625_CRT_RSTN_MAIN2_BIST]   = { .ofs = 0xb8, .bit = 4,  .write_en = 1 },
+	[RTD1625_CRT_RSTN_VE1_BIST]     = { .ofs = 0xb8, .bit = 6,  .write_en = 1 },
+	[RTD1625_CRT_RSTN_VE2_BIST]     = { .ofs = 0xb8, .bit = 8,  .write_en = 1 },
+	[RTD1625_CRT_RSTN_DCPHY_BIST]   = { .ofs = 0xb8, .bit = 10, .write_en = 1 },
+	[RTD1625_CRT_RSTN_GPU_BIST]     = { .ofs = 0xb8, .bit = 12, .write_en = 1 },
+	[RTD1625_CRT_RSTN_DISP_BIST]    = { .ofs = 0xb8, .bit = 14, .write_en = 1 },
+	[RTD1625_CRT_RSTN_NPU_BIST]     = { .ofs = 0xb8, .bit = 16, .write_en = 1 },
+	[RTD1625_CRT_RSTN_CAS_BIST]     = { .ofs = 0xb8, .bit = 18, .write_en = 1 },
+	[RTD1625_CRT_RSTN_VE4_BIST]     = { .ofs = 0xb8, .bit = 20, .write_en = 1 },
+	/* Bank 7: offset 0x454 (DUMMY0, no write_en) */
+	[RTD1625_CRT_RSTN_EMMC]         = { .ofs = 0x454, .bit = 0 },
+	/* Bank 8: offset 0x458 (DUMMY1, no write_en) */
+	[RTD1625_CRT_RSTN_GPU]          = { .ofs = 0x458, .bit = 0 },
+	/* Bank 9: offset 0x464 (DUMMY4, no write_en) */
+	[RTD1625_CRT_RSTN_VE2]          = { .ofs = 0x464, .bit = 0 },
+	/* Bank 10: offset 0x880 */
+	[RTD1625_CRT_RSTN_UR1]          = { .ofs = 0x880, .bit = 0,  .write_en = 1 },
+	[RTD1625_CRT_RSTN_UR2]          = { .ofs = 0x880, .bit = 2,  .write_en = 1 },
+	[RTD1625_CRT_RSTN_UR3]          = { .ofs = 0x880, .bit = 4,  .write_en = 1 },
+	[RTD1625_CRT_RSTN_UR4]          = { .ofs = 0x880, .bit = 6,  .write_en = 1 },
+	[RTD1625_CRT_RSTN_UR5]          = { .ofs = 0x880, .bit = 8,  .write_en = 1 },
+	[RTD1625_CRT_RSTN_UR6]          = { .ofs = 0x880, .bit = 10, .write_en = 1 },
+	[RTD1625_CRT_RSTN_UR7]          = { .ofs = 0x880, .bit = 12, .write_en = 1 },
+	[RTD1625_CRT_RSTN_UR8]          = { .ofs = 0x880, .bit = 14, .write_en = 1 },
+	[RTD1625_CRT_RSTN_UR9]          = { .ofs = 0x880, .bit = 16, .write_en = 1 },
+	[RTD1625_CRT_RSTN_UR_TOP]       = { .ofs = 0x880, .bit = 18, .write_en = 1 },
+	[RTD1625_CRT_RSTN_I2C_7]        = { .ofs = 0x880, .bit = 28, .write_en = 1 },
+	[RTD1625_CRT_RSTN_I2C_6]        = { .ofs = 0x880, .bit = 30, .write_en = 1 },
+	/* Bank 11: offset 0x890 */
+	[RTD1625_CRT_RSTN_SPI0]         = { .ofs = 0x890, .bit = 0,  .write_en = 1 },
+	[RTD1625_CRT_RSTN_SPI1]         = { .ofs = 0x890, .bit = 2,  .write_en = 1 },
+	[RTD1625_CRT_RSTN_SPI2]         = { .ofs = 0x890, .bit = 4,  .write_en = 1 },
+	[RTD1625_CRT_RSTN_LSADC0]       = { .ofs = 0x890, .bit = 16, .write_en = 1 },
+	[RTD1625_CRT_RSTN_LSADC1]       = { .ofs = 0x890, .bit = 18, .write_en = 1 },
+	[RTD1625_CRT_RSTN_ISOMIS_DMA]   = { .ofs = 0x890, .bit = 20, .write_en = 1 },
+	[RTD1625_CRT_RSTN_AUDIO_ADC]    = { .ofs = 0x890, .bit = 22, .write_en = 1 },
+	[RTD1625_CRT_RSTN_DPTX]         = { .ofs = 0x890, .bit = 24, .write_en = 1 },
+	[RTD1625_CRT_RSTN_AUCPU1_REG]   = { .ofs = 0x890, .bit = 26, .write_en = 1 },
+	[RTD1625_CRT_RSTN_EDPTX]        = { .ofs = 0x890, .bit = 28, .write_en = 1 },
+};
+
+static const struct rtd1625_reset_info rtd1625_crt_info = {
+	.descs = rtd1625_crt_reset_descs,
+	.nr_resets = ARRAY_SIZE(rtd1625_crt_reset_descs),
+};
+
+static const struct rtk_reset_desc rtd1625_iso_reset_descs[] = {
+	[RTD1625_ISO_RSTN_VFD]                 = { .ofs = 0x88, .bit = 0 },
+	[RTD1625_ISO_RSTN_CEC0]                = { .ofs = 0x88, .bit = 2 },
+	[RTD1625_ISO_RSTN_CEC1]                = { .ofs = 0x88, .bit = 3 },
+	[RTD1625_ISO_RSTN_CBUSTX]              = { .ofs = 0x88, .bit = 5 },
+	[RTD1625_ISO_RSTN_CBUSRX]              = { .ofs = 0x88, .bit = 6 },
+	[RTD1625_ISO_RSTN_USB3_PHY2_XTAL_POW]  = { .ofs = 0x88, .bit = 7 },
+	[RTD1625_ISO_RSTN_UR0]                 = { .ofs = 0x88, .bit = 8 },
+	[RTD1625_ISO_RSTN_GMAC]                = { .ofs = 0x88, .bit = 9 },
+	[RTD1625_ISO_RSTN_GPHY]                = { .ofs = 0x88, .bit = 10 },
+	[RTD1625_ISO_RSTN_I2C_0]               = { .ofs = 0x88, .bit = 11 },
+	[RTD1625_ISO_RSTN_I2C_1]               = { .ofs = 0x88, .bit = 12 },
+	[RTD1625_ISO_RSTN_CBUS]                = { .ofs = 0x88, .bit = 13 },
+	[RTD1625_ISO_RSTN_USB_DRD]             = { .ofs = 0x88, .bit = 14 },
+	[RTD1625_ISO_RSTN_USB_HOST]            = { .ofs = 0x88, .bit = 15 },
+	[RTD1625_ISO_RSTN_USB_PHY_0]           = { .ofs = 0x88, .bit = 16 },
+	[RTD1625_ISO_RSTN_USB_PHY_1]           = { .ofs = 0x88, .bit = 17 },
+	[RTD1625_ISO_RSTN_USB_PHY_2]           = { .ofs = 0x88, .bit = 18 },
+	[RTD1625_ISO_RSTN_USB]                 = { .ofs = 0x88, .bit = 19 },
+	[RTD1625_ISO_RSTN_TYPE_C]              = { .ofs = 0x88, .bit = 20 },
+	[RTD1625_ISO_RSTN_USB_U3_HOST]         = { .ofs = 0x88, .bit = 21 },
+	[RTD1625_ISO_RSTN_USB3_PHY0_POW]       = { .ofs = 0x88, .bit = 22 },
+	[RTD1625_ISO_RSTN_USB3_P0_MDIO]        = { .ofs = 0x88, .bit = 23 },
+	[RTD1625_ISO_RSTN_USB3_PHY1_POW]       = { .ofs = 0x88, .bit = 24 },
+	[RTD1625_ISO_RSTN_USB3_P1_MDIO]        = { .ofs = 0x88, .bit = 25 },
+	[RTD1625_ISO_RSTN_VTC]                 = { .ofs = 0x88, .bit = 26 },
+	[RTD1625_ISO_RSTN_USB3_PHY2_POW]       = { .ofs = 0x88, .bit = 27 },
+	[RTD1625_ISO_RSTN_USB3_P2_MDIO]        = { .ofs = 0x88, .bit = 28 },
+	[RTD1625_ISO_RSTN_USB_PHY_3]           = { .ofs = 0x88, .bit = 29 },
+	[RTD1625_ISO_RSTN_USB_PHY_4]           = { .ofs = 0x88, .bit = 30 },
+};
+
+static const struct rtd1625_reset_info rtd1625_iso_info = {
+	.descs = rtd1625_iso_reset_descs,
+	.nr_resets = ARRAY_SIZE(rtd1625_iso_reset_descs),
+};
+
+static const struct rtk_reset_desc rtd1625_iso_s_reset_descs[] = {
+	[RTD1625_ISO_S_RSTN_ISOM_MIS] = { .ofs = 0x310, .bit = 0, .write_en = 1 },
+	[RTD1625_ISO_S_RSTN_GPIOM]    = { .ofs = 0x310, .bit = 2, .write_en = 1 },
+	[RTD1625_ISO_S_RSTN_TIMER7]   = { .ofs = 0x310, .bit = 4, .write_en = 1 },
+	[RTD1625_ISO_S_RSTN_IRDA]     = { .ofs = 0x310, .bit = 6, .write_en = 1 },
+	[RTD1625_ISO_S_RSTN_UR10]     = { .ofs = 0x310, .bit = 8, .write_en = 1 },
+};
+
+static const struct rtd1625_reset_info rtd1625_iso_s_info = {
+	.descs = rtd1625_iso_s_reset_descs,
+	.nr_resets = ARRAY_SIZE(rtd1625_iso_s_reset_descs),
+};
+
+static int rtd1625_reset_probe(struct auxiliary_device *adev,
+			       const struct auxiliary_device_id *id)
+{
+	const struct rtd1625_reset_info *info;
+	struct device *dev = &adev->dev;
+	struct rtk_reset_data *data;
+
+	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	info = (const struct rtd1625_reset_info *)id->driver_data;
+
+	data->descs           = info->descs;
+	data->regmap          = dev_get_platdata(dev);
+	data->rcdev.owner     = THIS_MODULE;
+	data->rcdev.nr_resets = info->nr_resets;
+	data->rcdev.ops       = &rtk_reset_ops;
+	data->rcdev.dev       = dev;
+	data->rcdev.of_node   = dev->of_node;
+
+	return devm_reset_controller_register(dev, &data->rcdev);
+}
+
+static const struct auxiliary_device_id rtd1625_reset_ids[] = {
+	{
+		.name = "clk_rtk.rtd1625_crt_rst",
+		.driver_data = (kernel_ulong_t)&rtd1625_crt_info },
+	{
+		.name = "clk_rtk.rtd1625_iso_rst",
+		.driver_data = (kernel_ulong_t)&rtd1625_iso_info },
+	{
+		.name = "clk_rtk.rtd1625_iso_s_rst",
+		.driver_data = (kernel_ulong_t)&rtd1625_iso_s_info
+	},
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(auxiliary, rtd1625_reset_ids);
+
+static struct auxiliary_driver rtd1625_reset_driver = {
+	.probe    = rtd1625_reset_probe,
+	.id_table = rtd1625_reset_ids,
+	.driver = {
+		.name = "rtd1625-reset",
+	},
+};
+module_auxiliary_driver(rtd1625_reset_driver);
+
+MODULE_DESCRIPTION("Realtek RTD1625 Reset Controller Driver");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS("REALTEK_RESET");
-- 
2.43.0



  parent reply	other threads:[~2026-07-28 14:29 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-07-28 14:27 [PATCH v11 00/11] clk / reset: realtek: Add RTD1625 clock and reset support Yu-Chun Lin
2026-07-28 14:27 ` [PATCH v11 01/11] dt-bindings: clock: Add Realtek RTD1625 Clock & Reset Controller Yu-Chun Lin
2026-07-30 16:28   ` Brian Masney
2026-07-28 14:27 ` [PATCH v11 02/11] reset: Add Realtek basic reset support Yu-Chun Lin
2026-07-28 14:27 ` Yu-Chun Lin [this message]
2026-07-28 14:27 ` [PATCH v11 04/11] clk: realtek: Introduce a common probe() Yu-Chun Lin
2026-07-30 16:33   ` Brian Masney
2026-07-28 14:28 ` [PATCH v11 05/11] clk: realtek: Add support for phase locked loops (PLLs) Yu-Chun Lin
2026-07-30 16:31   ` Brian Masney
2026-07-28 14:28 ` [PATCH v11 06/11] clk: realtek: Add support for gate clock Yu-Chun Lin
2026-07-30 16:35   ` Brian Masney
2026-07-28 14:28 ` [PATCH v11 07/11] clk: realtek: Add support for mux clock Yu-Chun Lin
2026-07-30 16:35   ` Brian Masney
2026-07-28 14:28 ` [PATCH v11 08/11] clk: realtek: Add support for MMC-tuned PLL clocks Yu-Chun Lin
2026-07-30 16:44   ` Brian Masney
2026-07-28 14:28 ` [PATCH v11 09/11] clk: realtek: Add RTD1625-CRT clock controller driver Yu-Chun Lin
2026-07-30 16:54   ` Brian Masney
2026-07-28 14:28 ` [PATCH v11 10/11] clk: realtek: Add RTD1625-ISO " Yu-Chun Lin
2026-07-30 16:55   ` Brian Masney
2026-07-28 14:28 ` [PATCH v11 11/11] arm64: dts: realtek: Add clock support for RTD1625 Yu-Chun Lin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260728142806.1954638-4-eleanor.lin@realtek.com \
    --to=eleanor.lin@realtek.com \
    --cc=afaerber@suse.com \
    --cc=bmasney@redhat.com \
    --cc=conor+dt@kernel.org \
    --cc=cy.huang@realtek.com \
    --cc=cylee12@realtek.com \
    --cc=devicetree@vger.kernel.org \
    --cc=james.tai@realtek.com \
    --cc=jyanchou@realtek.com \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-realtek-soc@lists.infradead.org \
    --cc=mturquette@baylibre.com \
    --cc=p.zabel@pengutronix.de \
    --cc=robh@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=stanley_chang@realtek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox