From: Pranjal Shrivastava <praan@google.com>
To: iommu@lists.linux.dev
Cc: Will Deacon <will@kernel.org>, Joerg Roedel <joro@8bytes.org>,
Robin Murphy <robin.murphy@arm.com>,
Jason Gunthorpe <jgg@ziepe.ca>,
Mostafa Saleh <smostafa@google.com>,
Nicolin Chen <nicolinc@nvidia.com>,
Daniel Mentz <danielmentz@google.com>,
linux-arm-kernel@lists.infradead.org,
Pranjal Shrivastava <praan@google.com>
Subject: [PATCH v9 01/12] iommu/arm-smmu-v3: Refactor arm_smmu_setup_irqs
Date: Tue, 28 Jul 2026 21:09:17 +0000 [thread overview]
Message-ID: <20260728210928.1050849-2-praan@google.com> (raw)
In-Reply-To: <20260728210928.1050849-1-praan@google.com>
Refactor arm_smmu_setup_irqs by splitting it into two parts, one for
registering interrupt handlers and the other one for enabling interrupt
generation in the hardware. This refactor helps in re-initialization of
hardware interrupts as part of a subsequent patch that enables runtime
power management for the arm-smmu-v3 driver.
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Pranjal Shrivastava <praan@google.com>
---
drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c | 47 +++++++++++++--------
1 file changed, 30 insertions(+), 17 deletions(-)
diff --git a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
index 3a9cbd7d8a00..a11f5bcbe77d 100644
--- a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
+++ b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
@@ -4749,14 +4749,32 @@ static void arm_smmu_setup_unique_irqs(struct arm_smmu_device *smmu)
}
}
+static void arm_smmu_enable_irqs(struct arm_smmu_device *smmu)
+{
+ int ret;
+ u32 irqen_flags = IRQ_CTRL_EVTQ_IRQEN | IRQ_CTRL_GERROR_IRQEN;
+
+ if (smmu->features & ARM_SMMU_FEAT_PRI)
+ irqen_flags |= IRQ_CTRL_PRIQ_IRQEN;
+
+ ret = arm_smmu_write_reg_sync(smmu, irqen_flags,
+ ARM_SMMU_IRQ_CTRL, ARM_SMMU_IRQ_CTRLACK);
+ if (ret)
+ dev_warn(smmu->dev, "failed to enable irqs\n");
+}
+
+static int arm_smmu_disable_irqs(struct arm_smmu_device *smmu)
+{
+ return arm_smmu_write_reg_sync(smmu, 0, ARM_SMMU_IRQ_CTRL,
+ ARM_SMMU_IRQ_CTRLACK);
+}
+
static int arm_smmu_setup_irqs(struct arm_smmu_device *smmu)
{
int ret, irq;
- u32 irqen_flags = IRQ_CTRL_EVTQ_IRQEN | IRQ_CTRL_GERROR_IRQEN;
/* Disable IRQs first */
- ret = arm_smmu_write_reg_sync(smmu, 0, ARM_SMMU_IRQ_CTRL,
- ARM_SMMU_IRQ_CTRLACK);
+ ret = arm_smmu_disable_irqs(smmu);
if (ret) {
dev_err(smmu->dev, "failed to disable irqs\n");
return ret;
@@ -4778,15 +4796,6 @@ static int arm_smmu_setup_irqs(struct arm_smmu_device *smmu)
} else
arm_smmu_setup_unique_irqs(smmu);
- if (smmu->features & ARM_SMMU_FEAT_PRI)
- irqen_flags |= IRQ_CTRL_PRIQ_IRQEN;
-
- /* Enable interrupt generation on the SMMU */
- ret = arm_smmu_write_reg_sync(smmu, irqen_flags,
- ARM_SMMU_IRQ_CTRL, ARM_SMMU_IRQ_CTRLACK);
- if (ret)
- dev_warn(smmu->dev, "failed to enable irqs\n");
-
return 0;
}
@@ -4936,11 +4945,8 @@ static int arm_smmu_device_reset(struct arm_smmu_device *smmu)
}
}
- ret = arm_smmu_setup_irqs(smmu);
- if (ret) {
- dev_err(smmu->dev, "failed to setup irqs\n");
- return ret;
- }
+ /* Enable interrupt generation on the SMMU */
+ arm_smmu_enable_irqs(smmu);
if (is_kdump_kernel())
enables &= ~(CR0_EVTQEN | CR0_PRIQEN);
@@ -5576,6 +5582,13 @@ static int arm_smmu_device_probe(struct platform_device *pdev)
/* Check for RMRs and install bypass STEs if any */
arm_smmu_rmr_install_bypass_ste(smmu);
+ /* Setup interrupt handlers */
+ ret = arm_smmu_setup_irqs(smmu);
+ if (ret) {
+ dev_err(smmu->dev, "failed to setup irqs\n");
+ return ret;
+ }
+
/* Reset the device */
ret = arm_smmu_device_reset(smmu);
if (ret) {
--
2.55.0.487.gaf234c4eb3-goog
next prev parent reply other threads:[~2026-07-28 21:09 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-28 21:09 [PATCH v9 00/12] iommu/arm-smmu-v3: Implement Runtime/System Sleep ops Pranjal Shrivastava
2026-07-28 21:09 ` Pranjal Shrivastava [this message]
2026-07-28 21:09 ` [PATCH v9 02/12] iommu/arm-smmu-v3: Add a helper to drain cmd queues Pranjal Shrivastava
2026-07-28 21:09 ` [PATCH v9 03/12] iommu/tegra241-cmdqv: Add a helper to drain VCMDQs Pranjal Shrivastava
2026-07-28 21:09 ` [PATCH v9 04/12] iommu/tegra241-cmdqv: Restore PROD and CONS after resume Pranjal Shrivastava
2026-07-28 21:09 ` [PATCH v9 05/12] iommu/arm-smmu-v3: Cache and restore MSI config Pranjal Shrivastava
2026-07-28 21:09 ` [PATCH v9 06/12] iommu/arm-smmu-v3: Handle gerror during suspend Pranjal Shrivastava
2026-07-28 21:09 ` [PATCH v9 07/12] iommu/arm-smmu-v3: Add CMDQ_PROD_STOP_FLAG to gate CMDQ submissions Pranjal Shrivastava
2026-07-28 21:09 ` [PATCH v9 08/12] iommu/tegra241-cmdqv: Add a helper to quiesce VCMDQs Pranjal Shrivastava
2026-07-28 21:09 ` [PATCH v9 09/12] iommu/arm-smmu-v3: Implement pm_runtime & system sleep ops Pranjal Shrivastava
2026-07-28 21:09 ` [PATCH v9 10/12] iommu/arm-smmu-v3: Enable pm_runtime and setup devlinks Pranjal Shrivastava
2026-07-28 21:09 ` [PATCH v9 11/12] iommu/arm-smmu-v3: Invoke pm_runtime before hw access Pranjal Shrivastava
2026-07-28 21:09 ` [PATCH v9 12/12] iommu/arm-smmu-v3: Add KUnit unit tests for Runtime PM Pranjal Shrivastava
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260728210928.1050849-2-praan@google.com \
--to=praan@google.com \
--cc=danielmentz@google.com \
--cc=iommu@lists.linux.dev \
--cc=jgg@ziepe.ca \
--cc=joro@8bytes.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=nicolinc@nvidia.com \
--cc=robin.murphy@arm.com \
--cc=smostafa@google.com \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox