From: Dmitry Osipenko <dmitry.osipenko@collabora.com>
To: Ulf Hansson <ulfh@kernel.org>,
Matthias Brugger <matthias.bgg@gmail.com>,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@collabora.com>
Cc: linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org
Subject: [PATCH v2] pmdomain: mediatek: Fix mt8183 hang on boot
Date: Wed, 29 Jul 2026 15:59:07 +0300 [thread overview]
Message-ID: <20260729125907.830090-1-dmitry.osipenko@collabora.com> (raw)
Depending on firmware, part of the MFG domains may be partially left ON
at boot time with kernel detecting PD as ON, while it's OFF.
Some of MFG cores may be left powered after bootloader, to let the ACP to
prefetch the GPU region when the display controller is brought up for a
continuous splash animation performed by downstream stack.
This doesn't play well with an eventual delay in probing upstream Panfrost
driver when the display controller is fully set up, as that would make
genpd's sync_state() to power off the domain while ACP tries to prefetch:
this is causing an AXI stall, effectively freezing the AP indefinitely.
In order to prevent trouble from happening, the sync_state() functionality
must be obliterated on all of the MFG domains: while this guarantees a
power leakage if the bootloader boots the kernel with MFG PDs partially
powered on, this is the only way to ensure stable operation of the SoC
during boot on devices with such firmware because, of course, those will
never officially receive a firmware update.
Fixes Kappa Chromebook hanging during system boot.
Fixes: 0e789b491ba0 ("pmdomain: core: Leave powered-on genpds on until sync_state")
Fixes: 13a4b7fb6260 ("pmdomain: core: Leave powered-on genpds on until late_initcall_sync")
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
---
v2 - Expanded commit message with more clarification about kernel wrongly
detecting PD state left after bootloader.
drivers/pmdomain/mediatek/mt8183-pm-domains.h | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/pmdomain/mediatek/mt8183-pm-domains.h b/drivers/pmdomain/mediatek/mt8183-pm-domains.h
index 3742782a2702..5e33b8628e85 100644
--- a/drivers/pmdomain/mediatek/mt8183-pm-domains.h
+++ b/drivers/pmdomain/mediatek/mt8183-pm-domains.h
@@ -47,7 +47,7 @@ static const struct scpsys_domain_data scpsys_domain_data_mt8183[] = {
.pwr_sta2nd_offs = 0x0184,
.sram_pdn_bits = 0,
.sram_pdn_ack_bits = 0,
- .caps = MTK_SCPD_DOMAIN_SUPPLY,
+ .caps = MTK_SCPD_DOMAIN_SUPPLY | MTK_SCPD_KEEP_DEFAULT_OFF,
},
[MT8183_POWER_DOMAIN_MFG] = {
.name = "mfg",
@@ -57,7 +57,7 @@ static const struct scpsys_domain_data scpsys_domain_data_mt8183[] = {
.pwr_sta2nd_offs = 0x0184,
.sram_pdn_bits = GENMASK(8, 8),
.sram_pdn_ack_bits = GENMASK(12, 12),
- .caps = MTK_SCPD_DOMAIN_SUPPLY,
+ .caps = MTK_SCPD_DOMAIN_SUPPLY | MTK_SCPD_KEEP_DEFAULT_OFF,
},
[MT8183_POWER_DOMAIN_MFG_CORE0] = {
.name = "mfg_core0",
@@ -67,6 +67,7 @@ static const struct scpsys_domain_data scpsys_domain_data_mt8183[] = {
.pwr_sta2nd_offs = 0x0184,
.sram_pdn_bits = GENMASK(8, 8),
.sram_pdn_ack_bits = GENMASK(12, 12),
+ .caps = MTK_SCPD_KEEP_DEFAULT_OFF,
},
[MT8183_POWER_DOMAIN_MFG_CORE1] = {
.name = "mfg_core1",
@@ -76,6 +77,7 @@ static const struct scpsys_domain_data scpsys_domain_data_mt8183[] = {
.pwr_sta2nd_offs = 0x0184,
.sram_pdn_bits = GENMASK(8, 8),
.sram_pdn_ack_bits = GENMASK(12, 12),
+ .caps = MTK_SCPD_KEEP_DEFAULT_OFF,
},
[MT8183_POWER_DOMAIN_MFG_2D] = {
.name = "mfg_2d",
@@ -85,6 +87,7 @@ static const struct scpsys_domain_data scpsys_domain_data_mt8183[] = {
.pwr_sta2nd_offs = 0x0184,
.sram_pdn_bits = GENMASK(8, 8),
.sram_pdn_ack_bits = GENMASK(12, 12),
+ .caps = MTK_SCPD_KEEP_DEFAULT_OFF,
.bp_cfg = {
BUS_PROT_WR(INFRA,
MT8183_TOP_AXI_PROT_EN_1_MFG,
--
2.54.0
reply other threads:[~2026-07-29 13:00 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260729125907.830090-1-dmitry.osipenko@collabora.com \
--to=dmitry.osipenko@collabora.com \
--cc=angelogioacchino.delregno@collabora.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-pm@vger.kernel.org \
--cc=matthias.bgg@gmail.com \
--cc=ulfh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox