Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Andre Przywara <andre.przywara@arm.com>
To: Lorenzo Pieralisi <lpieralisi@kernel.org>,
	Hanjun Guo <guohanjun@huawei.com>,
	Sudeep Holla <sudeep.holla@kernel.org>,
	Catalin Marinas <catalin.marinas@arm.com>,
	Will Deacon <will@kernel.org>,
	"Rafael J . Wysocki" <rafael@kernel.org>,
	Len Brown <lenb@kernel.org>, James Morse <james.morse@arm.com>,
	Ben Horgan <ben.horgan@arm.com>,
	Reinette Chatre <reinette.chatre@intel.com>,
	Fenghua Yu <fenghuay@nvidia.com>
Cc: Jonathan Cameron <jic23@kernel.org>,
	Srivathsa L Rao <srivathsa.rao@oss.qualcomm.com>,
	Ganapatrao Kulkarni <ganapatrao.kulkarni@oss.qualcomm.com>,
	Trilok Soni <tsoni@quicinc.com>,
	Srinivas Ramana <sramana@qti.qualcomm.com>,
	Niyas Sait <niyas.sait@arm.com>, Lee Trager <lee@trager.us>,
	linux-acpi@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v5 05/10] arm_mpam: propagate MSC access errors for __ris_msmon_read()
Date: Wed, 29 Jul 2026 15:41:19 +0200	[thread overview]
Message-ID: <20260729134124.2506269-6-andre.przywara@arm.com> (raw)
In-Reply-To: <20260729134124.2506269-1-andre.przywara@arm.com>

Allow the function for RIS accesses to return an error, and propagate
read and write errors from the lower level up.
This function is a bit special, since it can be called via an SMP
helper, so the prototype must stay as void. So propagate any errors
using the "err" field in the struct passed in as the sole argument to
that function.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
---
 drivers/resctrl/mpam_devices.c | 36 +++++++++++++++++++++++++---------
 1 file changed, 27 insertions(+), 9 deletions(-)

diff --git a/drivers/resctrl/mpam_devices.c b/drivers/resctrl/mpam_devices.c
index 9d9f0c635527..44eafef1e7ab 100644
--- a/drivers/resctrl/mpam_devices.c
+++ b/drivers/resctrl/mpam_devices.c
@@ -1333,6 +1333,10 @@ static u64 mpam_msmon_overflow_val(enum mpam_device_features type,
 	return overflow_val;
 }
 
+/*
+ * This function might be called via smp_call_function_any(), so propagate
+ * errors inside the arg struct.
+ */
 static void __ris_msmon_read(void *arg)
 {
 	u64 now;
@@ -1356,7 +1360,9 @@ static void __ris_msmon_read(void *arg)
 
 	mon_sel = FIELD_PREP(MSMON_CFG_MON_SEL_MON_SEL, ctx->mon) |
 		  FIELD_PREP(MSMON_CFG_MON_SEL_RIS, ris->ris_idx);
-	mpam_write_monsel_reg(msc, CFG_MON_SEL, mon_sel);
+	m->err = mpam_write_monsel_reg(msc, CFG_MON_SEL, mon_sel);
+	if (m->err)
+		return;
 
 	switch (m->type) {
 	case mpam_feat_msmon_mbwu_31counter:
@@ -1376,7 +1382,9 @@ static void __ris_msmon_read(void *arg)
 	 * Read the existing configuration to avoid re-writing the same values.
 	 * This saves waiting for 'nrdy' on subsequent reads.
 	 */
-	read_msmon_ctl_flt_vals(m, &cur_ctl, &cur_flt);
+	m->err = read_msmon_ctl_flt_vals(m, &cur_ctl, &cur_flt);
+	if (m->err)
+		return;
 
 	if (mpam_feat_msmon_mbwu_31counter == m->type)
 		overflow = cur_ctl & MSMON_CFG_x_CTL_OFLOW_STATUS;
@@ -1390,18 +1398,24 @@ static void __ris_msmon_read(void *arg)
 			  cur_ctl != (ctl_val | MSMON_CFG_x_CTL_EN);
 
 	if (config_mismatch || reset_on_next_read) {
-		write_msmon_ctl_flt_vals(m, ctl_val, flt_val);
+		m->err = write_msmon_ctl_flt_vals(m, ctl_val, flt_val);
+		if (m->err)
+			return;
 		overflow = false;
 	} else if (overflow) {
-		mpam_write_monsel_reg(msc, CFG_MBWU_CTL,
-				      cur_ctl &
-				      ~(MSMON_CFG_x_CTL_OFLOW_STATUS |
-					MSMON_CFG_MBWU_CTL_OFLOW_STATUS_L));
+		m->err = mpam_write_monsel_reg(msc, CFG_MBWU_CTL,
+					    cur_ctl &
+					    ~(MSMON_CFG_x_CTL_OFLOW_STATUS |
+					    MSMON_CFG_MBWU_CTL_OFLOW_STATUS_L));
+		if (m->err)
+			return;
 	}
 
 	switch (m->type) {
 	case mpam_feat_msmon_csu:
-		mpam_read_monsel_reg(msc, CSU, &now32);
+		m->err = mpam_read_monsel_reg(msc, CSU, &now32);
+		if (m->err)
+			return;
 		nrdy = now32 & MSMON___NRDY;
 		now = FIELD_GET(MSMON___VALUE, now32);
 
@@ -1423,7 +1437,9 @@ static void __ris_msmon_read(void *arg)
 			else
 				now = FIELD_GET(MSMON___L_VALUE, now);
 		} else {
-			mpam_read_monsel_reg(msc, MBWU, &now32);
+			m->err = mpam_read_monsel_reg(msc, MBWU, &now32);
+			if (m->err)
+				return;
 			nrdy = now32 & MSMON___NRDY;
 			now = FIELD_GET(MSMON___VALUE, now32);
 		}
@@ -1792,6 +1808,8 @@ static int mpam_restore_mbwu_state(void *_ris)
 			mwbu_arg.val = &val;
 
 			__ris_msmon_read(&mwbu_arg);
+			if (mwbu_arg.err)
+				return mwbu_arg.err;
 		}
 	}
 
-- 
2.43.0



  parent reply	other threads:[~2026-07-29 13:42 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-07-29 13:41 [PATCH v5 00/10] arm_mpam: Add MPAM-Fb firmware support Andre Przywara
2026-07-29 13:41 ` [PATCH v5 01/10] arm_mpam: let low level MSC accessors return an error Andre Przywara
2026-07-29 13:41 ` [PATCH v5 02/10] arm_mpam: propagate MSC access errors for hw_probe functions Andre Przywara
2026-07-29 13:41 ` [PATCH v5 03/10] arm_mpam: propagate MSC access errors for MBWU counters Andre Przywara
2026-07-29 13:41 ` [PATCH v5 04/10] arm_mpam: propagate MSC access errors for msmon helpers Andre Przywara
2026-07-29 13:41 ` Andre Przywara [this message]
2026-07-29 13:41 ` [PATCH v5 06/10] arm_mpam: propagate MSC access errors for state saving function Andre Przywara
2026-07-29 13:41 ` [PATCH v5 07/10] arm_mpam: prepare mon_sel locking for MPAM-Fb Andre Przywara
2026-07-29 13:41 ` [PATCH v5 08/10] arm_mpam: add MPAM-Fb MSC firmware access support Andre Przywara
2026-07-29 14:51   ` Ben Horgan
2026-07-29 15:17     ` Andre Przywara
2026-07-29 16:10   ` Ben Horgan
2026-07-29 16:13   ` Srivathsa L Rao
2026-07-29 13:41 ` [PATCH v5 09/10] arm_mpam: change error IRQ to use a threaded IRQ handler Andre Przywara
2026-07-29 15:23   ` Ben Horgan
2026-07-29 13:41 ` [PATCH v5 10/10] arm_mpam: detect and enable MPAM-Fb PCC support Andre Przywara

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260729134124.2506269-6-andre.przywara@arm.com \
    --to=andre.przywara@arm.com \
    --cc=ben.horgan@arm.com \
    --cc=catalin.marinas@arm.com \
    --cc=fenghuay@nvidia.com \
    --cc=ganapatrao.kulkarni@oss.qualcomm.com \
    --cc=guohanjun@huawei.com \
    --cc=james.morse@arm.com \
    --cc=jic23@kernel.org \
    --cc=lee@trager.us \
    --cc=lenb@kernel.org \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lpieralisi@kernel.org \
    --cc=niyas.sait@arm.com \
    --cc=rafael@kernel.org \
    --cc=reinette.chatre@intel.com \
    --cc=sramana@qti.qualcomm.com \
    --cc=srivathsa.rao@oss.qualcomm.com \
    --cc=sudeep.holla@kernel.org \
    --cc=tsoni@quicinc.com \
    --cc=will@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox